Effect of Analysis Procedures in Linear Amplitude Sweep Test on the Fatigue Resistance of Nanoclay-Modified Asphalt Binders
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 1
Abstract
The present study aims to quantify the fatigue characteristics of nanoclay-modified binders, considering different analysis procedures in the linear amplitude sweep (LAS) test. Four unmodified and modified asphalt binders were subjected to the LAS test at 10°C, 20°C, and 30°C. The fatigue life obtained using five different analytical methods were assessed and compared. The effect of controlled strain rate (CSR) used in the LAS test was not found to be significant in changing the fatigue ranking of asphalt binders. Different analytical methods produce different fatigue curves with no change in the relative ranking of the binders at each temperature. The model parameters ( and ) obtained by fitting the relationship between average released pseudostrain energy () and the number of cycles to failure () can significantly impact fatigue life, resulting in a discrepancy in the results. This discrepancy, across different temperatures and binder types, can be removed by smoothening of the model with . The unified analysis, as is proposed in this study, results in a lower value of fatigue life at lower strain susceptibility in the standard fatigue model. Statistical analysis reveals that there is no distinct influence of nanoclay on the fatigue life of asphalt binders. Inclusion of nanoclay results in either similar or marginally higher fatigue life at all the temperatures. The analysis and results support the use of a approach for quantifying the fatigue life of asphalt binders.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published paper.
Acknowledgments
The authors would like to thank the Indian Institute of Technology (Banaras Hindu University) for facilitating the laboratory study.
References
AASHTO. 2014. Estimating damage tolerance of asphalt binders using linear amplitude sweep. AASHTO TP101. Washington, DC: AASHTO.
Anderson, D. A., D. Christensen, H. U. Bahia, R. Dongre, M. G. Sharma, and C. E. Antle. 1994. Binder characterization and evaluation. Volume 3: Physical characterization. Washington, DC: Strategic Highway Research Program.
Ashish, P. K., and D. Singh. 2018. “Development of empirical model for predicting and viscosity value for nanoclay and carbon nano tube modified asphalt binder.” Constr. Build. Mater. 165 (Mar): 363–371. https://doi.org/10.1016/j.conbuildmat.2018.01.021.
Ashish, P. K., D. Singh, and S. Bohm. 2016. “A study on the rheological performance of a nanoclay-modified asphalt binder using the Brookfield viscometer and dynamic shear rheometer.” In Geo-China 2016: Resilient railroad materials and structures to mitigate climate change, Geotechnical Special Publication 268, edited by L. F. Walubita, I. Holleran, and A. D. Mwanza, 9–15. Reston, VA: ASCE.
Ashish, P. K., D. Singh, and S. Bohm. 2017. “Investigation on influence of nanoclay addition on rheological performance of asphalt binder.” Road Mater. Pavement Des. 18 (5): 1007–1026. https://doi.org/10.1080/14680629.2016.1201522.
Azahar, W. N. A. W., M. Bujang, R. P. Jaya, M. R. Hainin, M. M. Aziz, and N. Ngadi. 2015. “Application of nanotechnology in asphalt binder: A conspectus and overview.” Jurnal Teknologi 76 (14): 85–89. https://doi.org/10.11113/jt.v76.5847.
Bahia, H., H. Zhai, K. Bonnetti, and S. Kose. 1999. “Non-linear viscoelastic and fatigue properties of asphalt binders.” J. Assoc. Asphalt Paving Technol. 68: 1–34.
Bahia, H. U., D. I. Hanson, M. Zeng, H. Zhai, M. A. Khatri, and R. M. Anderson. 2001. Characterization of modified asphalt binder in superpave mix design. Washington, DC: Transportation Research Board.
Castorena, C., C. Wang, and N. Carolina. 2014. Development of failure criterion for linear amplitude sweep (LAS) test LAS test procedure. Raleigh, NC: North Carolina State Univ.
D’Angelo, J., G. Reinke, H. Bahia, H. Wen, C. M. Johnson, and M. Marasteanu. 2010. Development in asphalt binder specifications. Washington, DC: Transportation Research Board.
El-Shafie, M., I. M. Ibrahim, and A. M. M. Abd El Rahman. 2012. “The addition effects of macro and nano clay on the performance of asphalt binder.” Egypt. J. Pet. 21 (2): 149–154. https://doi.org/10.1016/j.ejpe.2012.11.008.
Farias, L. G. A., J. L. Leitinho, B. D. C. Amoni, J. B. Bastos, J. B. Soares, S. D. A. Soares, and H. B. de Sant’Ana. 2016. “Effects of nanoclay and nanocomposites on bitumen rheological properties.” Constr. Build. Mater. 125 (Oct): 873–883. https://doi.org/10.1016/j.conbuildmat.2016.08.127.
Farrar, M. J., R. W. Grimes, C. Sui, J. P. Planche, S. C. Huang, T. F. Turner, and R. Glaser. 2012. “Thin film oxidative aging and low temperature performance grading using small plate dynamic shear rheometry: An alternative to standard RTFO, PAV, and BBR.” In Proc., 5th Eurasphalt and Eurobitume Congress. Washington, DC: Transportation Research Board.
Ghaffarpour, S., and A. Khodaii. 2009. “Effects of nanoclay on rheological properties of bitumen binder.” Constr. Build. Mater. 23 (8): 2894–2904. https://doi.org/10.1016/j.conbuildmat.2009.02.027.
Ghile, D. B. 2006. “Effects of nanoclay modification on rheology of bitumen and on performance of asphalt mixtures.” M.S. thesis, Delft Univ. of Technology. http://resolver.tudelft.nl/uuid:e92ae692-10e5-455d-b8ad-0eff3702071e.
Hajj, R., and A. Bhasin. 2018. “The search for a measure of fatigue cracking in asphalt binders—A review of different approaches.” Int. J. Pavement Eng. 19 (3): 205–219. https://doi.org/10.1080/10298436.2017.1279490.
Hintz, C., R. Velasquez, C. Johnson, and H. Bahia. 2011. “Modification and validation of linear amplitude sweep test for binder fatigue specification.” Transp. Res. Rec. 2207 (1): 99–106. https://doi.org/10.3141/2207-13.
Huang, Y. H. 2010. Pavement analysis and design. London: Pearson.
Jahromi, S. G., N. A. Ahmadi, S. M. Mortazavi, and S. Vossough. 2011. “Rutting and fatigue behavior of nanoclay modified bitumen.” Iran. J. Sci. Technol. Trans. B: Eng. 35 (2): 277–281.
Johnson, C., H. Bahia, and H. Wen. 2009. “Practical application of viscoelastic continuum damage theory to asphalt binder fatigue characterization.” J. Assoc. Asphalt Paving Technol. 78: 597–638.
Johnson, C. M. 2010. “Estimating asphalt binder fatigue resistance using an accelerated test method.” Doctoral dissertation, Dept. of Civil and Environmental Engineering, Univ. of Wisconsin–Madison.
Kim, Y. R., C. Baek, B. S. Underwood, V. Subramanian, M. N. Guddati, and K. Lee. 2008. “Application of viscoelastic continuum damage model based finite element analysis to predict the fatigue performance of asphalt pavements.” KSCE J. Civ. Eng. 12 (2): 109–120. https://doi.org/10.1007/s12205-008-0109-x.
Kim, Y. R., H.-J. Lee, and D. N. Little. 1997. “Fatigue characterization of asphalt concrete using viscoelasticity and continuum damage theory.” J. Assoc. Asphalt Paving Technol. 66: 520–569.
Mahdi, L. M. J., R. Muniandy, R. B. Yunus, S. Hasham, and E. Aburkaba. 2013. “Effect of short term aging on organic montmorillonite nanoclay modified asphalt.” Indian J. Sci. Technol. 6 (11): 5434–5442. https://doi.org/10.17485/ijst/2013/v6i11.13.
Micaelo, R., A. Pereira, L. Quaresma, and M. T. Cidade. 2015. “Fatigue resistance of asphalt binders: Assessment of the analysis methods in strain-controlled tests.” Constr. Build. Mater. 98 (Nov): 703–712. https://doi.org/10.1016/j.conbuildmat.2015.08.070.
Saboo, N. 2020. “New damage parameter for fatigue analysis of asphalt binders in linear amplitude sweep test.” J. Mater. Civ. Eng. 32 (6): 04020126. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003225.
Saboo, N., B. P. Das, and P. Kumar. 2016. “New phenomenological approach for modeling fatigue life of asphalt mixes.” Constr. Build. Mater. 121 (Sep): 134–142. https://doi.org/10.1016/j.conbuildmat.2016.05.147.
Saboo, N., and P. Kumar. 2016. “Performance characterization of polymer modified asphalt binders and mixes.” Adv. Civ. Eng. 2016: 1–12. https://doi.org/10.1155/2016/5938270.
Safaei, F., C. Castorena, and Y. R. Kim. 2016. “Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling.” Mech. Time-Depend. Mater. 20 (3): 299–323. https://doi.org/10.1007/s11043-016-9304-1.
Santagata, E., O. Baglieri, L. Tsantilis, and G. Chiappinelli. 2015. “Fatigue and healing properties of nano-reinforced bituminous binders.” Int. J. Fatigue 80 (Nov): 30–39. https://doi.org/10.1016/j.ijfatigue.2015.05.008.
Schapery, R. A. 1984. “Correspondence principles and a generalized integral for large deformation and fracture analysis of viscoelastic media.” Int. J. Fract. 25 (3): 195–223. https://doi.org/10.1007/BF01140837.
Schapery, R. A. 1990. “A theory of mechanical behavior of elastic media with growing damage and other changes in structure.” J. Mech. Phys. Solids 38 (2): 215–253. https://doi.org/10.1016/0022-5096(90)90035-3.
Schapery, R. A. 1997. “Nonlinear viscoelastic and viscoplastic constitutive equations based on thermodynamics.” Mech. Time-Depend. Mater. 1 (2): 209–240. https://doi.org/10.1023/A:1009767812821.
Tsai, B.-W., and C. L. Monismith. 2005. “Influence of asphalt binder properties on the fatigue performance of asphalt concrete pavements (with discussion).” J. Assoc. Asphalt Paving Technol. 74 (Jan): 733–789.
Underwood, B. S., C. Baek, and Y. R. Kim. 2012. “Simplified viscoelastic continuum damage model as platform for asphalt concrete fatigue analysis.” Transp. Res. Rec. 2296 (1): 36–45. https://doi.org/10.3141/2296-04.
Varun, and T. Gehlot. 2018. “Use of nano-clay in asphalt binder modification.” IOSR J. Mech. Civ. Eng. 15 (1): 25–30.
Wang, C., C. Castorena, J. Zhang, and Y. Richard Kim. 2015. “Unified failure criterion for asphalt binder under cyclic fatigue loading.” Supplement, Road Mater. Pavement Des. 16 (S2): 125–148. https://doi.org/10.1080/14680629.2015.1077010.
Wang, C., W. Xie, Y. Chen, A. Diab, and Z. You. 2017. “Refining the calculation method for fatigue failure criterion of asphalt binder from linear amplitude sweep test.” J. Mater. Civ. Eng. 30 (2): 04017286. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002147.
Wu, S., J. Wang, and L. Jiesheng. 2010. “Preparation and fatigue property of nanoclay modified asphalt binder.” In Proc., 2010 Int. Conf. on Mechanic Automation and Control Engineering, MACE2010, 1595–1598. New York: IEEE.
Yang, J., and S. Tighe. 2013. “A review of advances of nanotechnology in asphalt mixtures.” Procedia Social Behav. Sci. 96 (Nov): 1269–1276. https://doi.org/10.1016/j.sbspro.2013.08.144.
You, Z., J. Mills-Beale, J. M. Foley, S. Roy, G. M. Odegard, Q. Dai, and S. W. Goh. 2011. “Nanoclay-modified asphalt materials: Preparation and characterization.” Constr. Build. Mater. 25 (2): 1072–1078. https://doi.org/10.1016/j.conbuildmat.2010.06.070.
Yu, J., X. Zeng, S. Wu, L. Wang, and G. Liu. 2007. “Preparation and properties of montmorillonite modified asphalts.” Mater. Sci. Eng., A 447 (1–2): 233–238. https://doi.org/10.1016/j.msea.2006.10.037.
Yusoff, N. I. M. 2012. “Modelling the linear viscoelastic rheological properties of bituminous binders.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Nottingham.
Zhang, B., M. Xi, D. Zhang, H. Zhang, and B. Zhang. 2009. “The effect of styrene-butadiene-rubber/montmorillonite modification on the characteristics and properties of asphalt.” Constr. Build. Mater. 23 (10): 3112–3117. https://doi.org/10.1016/j.conbuildmat.2009.06.011.
Zhang, H., K. Shen, G. Xu, J. Tong, R. Wang, D. Cai, and X. Chen. 2020. “Fatigue resistance of aged asphalt binders: An investigation of different analytical methods in linear amplitude sweep test.” Constr. Build. Mater. 241 (Apr): 118099. https://doi.org/10.1016/j.conbuildmat.2020.118099.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 19, 2020
Accepted: Jun 19, 2020
Published online: Oct 25, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 25, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.