Global Buckling Behavior of Welded Thick H-Shaped Axial Compression Columns of Q460GJ Steel
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 1
Abstract
This paper presents an experimental and numerical study on the global buckling behavior of welded thick H-section columns of Q460GJ steel under axial load. The thickness of the flange and web is 42 and 25 mm, respectively, and the slenderness ratios of the columns vary between 49.8 and 85.0. Six specimens with different section sizes were tested, and their overall buckling results showed significant lateral displacement. Test results and design values calculated in accordance with several national design codes were compared. Finite-element models that considered the initial inflexion and residual stress were established. The comparison between the finite-element calculation and test results confirmed the reliability and accuracy of the model. A parametric study of the bearing capacity of thick H-section columns was conducted on the basis of their slenderness ratio and section size. Design recommendations were provided on the basis of the comparative analysis of the finite-element calculation results and design curves obtained using different codes. Recommendations for selecting column curve types in national codes is given when designing global buckling of welded thick H-section columns of Q460GJ steel under axial loading.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The authors gratefully acknowledge the sponsorship from the National Natural Science Foundation of China (51578089 and 51508050) and 111 Project (Grant No. B18062).
References
AISC. 2010. Specification for structural steel buildings. Chicago: AISC.
Ban, H., G. Shi, Y. Bai, Y. Shi, and W. Yuanqing. 2013a. “Residual stress of 460MPa high strength steel welded i section: Experimental investigation and modeling.” Int. J. Steel Struct. 13 (4): 691–705. https://doi.org/10.1007/s13296-013-4010-1.
Ban, H., G. Shi, Y. Shi, and M. A. Bradford. 2013b. “Experimental investigation of the overall buckling behaviour of 960MPa high strength steel columns.” J. Constr. Steel Res. 88 (Sep): 256–266. https://doi.org/10.1016/j.jcsr.2013.05.015.
Ban, H., G. Shi, Y. Shi, and W. Yuanqing. 2012. “Overall buckling behavior of 460 MPa high strength steel columns: Experimental investigation and design method.” J. Constr. Steel Res. 74 (Jul): 140–150. https://doi.org/10.1016/j.jcsr.2012.02.013.
CEN (European Committee for Standardization). 2005. Eurocode 3: Design of steel structures—Part 1-1: General rules and rules for buildings. GB/T19879-2005. Beijing: Standard Press.
CEN (European Committee for Standardization). 2017. Code for design of steel structures. GB50017-2017. Beijing: China Planning Press.
Fukumoto, Y. 1996. “New constructional steels and structural stability.” Eng. Struct. 18 (10): 786–791. https://doi.org/10.1016/0141-0296(96)00008-9.
Kang, S. B., B. Yang, X. Zhou, and S. D. Nie. 2018. “Global buckling behaviour of welded Q460GJ steel box columns under axial compression.” J. Constr. Steel Res. 140 (Jan): 153–162. https://doi.org/10.1016/j.jcsr.2017.10.013.
Kim, D. K., C. H. Lee, K. H. Han, J. H. Kim, S. E. Lee, and H. B. Sim. 2014. “Strength and residual stress evaluation of stub columns fabricated from 800 MPa high-strength steel.” J. Constr. Steel Res. 102 (Nov): 111–120. https://doi.org/10.1016/j.jcsr.2014.07.007.
Li, T. J., G. Q. Li, S. L. Chan, and Y. B. Wang. 2016a. “Behavior of Q690 high-strength steel columns: Part 1: Experimental investigation.” J. Constr. Steel Res. 123 (Aug): 18–30. https://doi.org/10.1016/j.jcsr.2016.03.026.
Li, T. J., S. W. Liu, G. Q. Li, S. L. Chan, and Y. B. Wang. 2016b. “Behavior of Q690 high-strength steel columns: Part 2: Parametric study and design recommendations.” J. Constr. Steel Res. 122 (Jul): 379–394. https://doi.org/10.1016/j.jcsr.2016.03.027.
Nie, S. D., S. B. Kang, L. Shen, and B. Yang. 2017. “Experimental and numerical study on global buckling of Q460GJ steel box columns under eccentric compression.” Eng. Struct. 142 (Jul): 211–222. https://doi.org/10.1016/j.engstruct.2017.03.064.
Rasmussen, K. J. R., and G. J. Hancock. 1995. “Tests of high strength steel columns.” J. Constr. Steel Res. 34 (1): 27–52. https://doi.org/10.1016/0143-974X(95)97296-A.
Shi, G., H. Ban, and F. S. K. Bijlaard. 2012. “Tests and numerical study of ultra-high strength steel columns with end restraints.” J. Constr. Steel Res. 70 (Mar): 236–247. https://doi.org/10.1016/j.jcsr.2011.10.027.
Shi, G., W. Zhou, Y. Bai, and L. Cuocuo. 2014. “Local buckling of 460 MPa high strength steel welded section stub columns under axial compression.” J. Constr. Steel Res. 100 (Sep): 60–70. https://doi.org/10.1016/j.jcsr.2014.04.027.
Shi Y. J. 2009. “Development and application of high strength and high performance steel in buildings.” In Proc., 3rd Int. Forum on Advances in Structural Engineering, 397–407. Beijing: Architecture & Building Press.
Usami, T., Y. Fukumoto. 1984. “Welded box compression members.” J. Struct. Eng. 110 (10): 2457–2470. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:10(2457).
Wang, Y. B., G. Q. Li, S. W. Chen, and F. F. Sun. 2012. “Experimental and numerical study on the behavior of axially compressed high strength steel columns with H-section.” Eng. Struct. 43 (Oct): 149–159. https://doi.org/10.1016/j.engstruct.2012.05.018.
Wang, Y. B., G. Q. Li, S. W. Chen, and F. F. Sun. 2014. “Experimental and numerical study on the behavior of axially compressed high strength steel box-columns.” Eng. Struct. 58 (Jan): 79–91. https://doi.org/10.1016/j.engstruct.2013.10.013.
Xiong, G., G. Xiong, S. B. Kang, B. Yang, S. Wang, J. Bai, S. Nie, and G. Dai. 2016. “Experimental and numerical studies on lateral torsional buckling of welded Q460GJ structural steel beams.” Eng. Struct. 126 (Nov): 1–14. https://doi.org/10.1016/j.engstruct.2016.07.050.
Yang, B., S. Nie, G. Xiong, Y. Hu, J. Bai, W. Zhang, and G. Dai. 2016a. “Residual stresses in welded I-shaped sections fabricated from Q460GJ structural steel plates.” J. Constr. Steel Res. 122 (Jul): 261–273. https://doi.org/10.1016/j.jcsr.2016.03.029.
Yang, B., S. D. Nie, S. B. Kang, G. Xiong, Y. Hu, J. Bai, and G. Dai. 2017. “Residual stress measurement on welded Q345GJ steel H-sections by sectioning method and method improvement.” Adv. Steel Constr. 13 (1): 78–95. https://doi.org/10.18057/IJASC.2017.13.1.5.
Yang, B., G. Xiong, K. Ding, S. Nie, W. Zhang, Y. Hu, and G. Dai. 2016b. “Experimental and numerical studies on lateral-Torsional buckling of GJ structural steel beams under a concentrated loading condition.” Int. J. Struct. Stab. Dyn. 16 (1): 1640004. https://doi.org/10.1142/S0219455416400046.
Yang, B., Q. Zhu, S. Nie, M. Elchalakani, and G. Xiong. 2018. “Experimental and model investigation on residual stresses in Q460GJ thick-walled I-shaped sections.” J. Constr. Steel Res. 145 (Jun): 489–503. https://doi.org/10.1016/j.jcsr.2018.03.008.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Oct 13, 2019
Accepted: Jun 12, 2020
Published online: Oct 19, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.