Experimental Investigation on Concrete Using Corn Stalk and Magnesium Phosphate Cement under Compaction Forming Technology
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 12
Abstract
Agricultural by-products are increasingly used in the production of bio-based concrete. Compaction forming technology was used in this study to develop a sustainable biocomposite made from corn stalk (CS) and magnesium phosphate cement (MPC). The goal was to experimentally evaluate the effect of forming pressure (FP), CS content, and fly ash (FA) content on the apparent density, compressive strength, and thermal conductivity of CS-MPC biocomposite (CMB). Furthermore, the microstructure changes of typical CMB samples were analyzed by conducting scanning electron microscopy (SEM) tests. The results indicated that the apparent density and thermal conductivity of CMB were less influenced by the FP, while the compressive strength can be effectively improved by increasing FP. The increase of CS content from 25% to 45% led to a 47% reduction in thermal conductivity and a significant decrease of compressive strength. The inclusion of FA had little influence on the apparent density, but resulted in 9.48% reduction in thermal conductivity by adding 20% FA. The optimum FA content of 10% was recommended as MPC admixture, which can increase compressive strength of CMB by 4.17%. The linear empirical model for predicting thermal conductivity by apparent density was established. The microstructure changes inside CMB showed the bonding properties between MPC and CS, and the corresponding micromechanisms were analyzed. The findings provide a basic theory for using CMB as thermal insulation material in buildings.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research work was financially supported by the National Natural Science Foundation of China, Grant No. 51778363.
References
Ahmad, M. R., B. Chen, and S. Y. Oderji, and M. Mohsan. 2018. “Development of a new bio-composite for building insulation and structural purpose using corn stalk and magnesium phosphate cement.” Energy Build. 173 (Aug): 719–733. https://doi.org/10.1016/j.enbuild.2018.06.007.
Ahmad, M. R., B. Chen, and M. A. Haque, and S. Y. Oderji. 2020. “Multiproperty characterization of cleaner and energy-efficient vegetal concrete based on one-part geopolymer binder.” J. Clean. Prod. 253: 119916. https://doi.org/10.1016/j.jclpro.2019.119916.
Ahmad, M. R., B. Chen, and M. A. Haque, and S. F. A. Shah. 2019. “Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanism properties.” J. Clean. Prod. 209 (Aug): 128–143. https://doi.org/10.1016/j.jclepro.2019.05.002.
Arnaud, L., and E. Gourlay. 2012. “Experimental study of parameters influencing mechanical properties of hemp concretes.” Constr. Build. Mater. 28 (1): 50–56. https://doi.org/10.1016/j.conbuildmat.2011.07.052.
Ashour, T., H. Georg, F. J. Bockisch, and W. Wu. 2010. “The influence of natural reinforcement fibres on insulation values of earth plaster for straw bale buildings.” Mater. Des. 31 (10): 4676–4685. https://doi.org/10.1016/j.matdes.2010.05.026.
Baduge, S. K., P. Mendis, R. San Nicolas, K. Nguyen, and A. Hajimohammadi. 2019. “Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature.” Constr. Build. Mater. 224 (Nov): 158–172. https://doi.org/10.1016/j.conbuildmat.2019.07.069.
Benazzouk, A., O. Douzane, K. Mezreb, B. Laidoudi, and M. Queneudec. 2008. “Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modeling.” Constr. Build. Mater. 22 (4): 573–579. https://doi.org/10.1016/j.conbuildmat.2006.11.011.
Benmansour, N., B. Agoudjil, A. Gherabli, A. Kareche, and A. Boudenne. 2014. “Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building.” Energy Build. 81 (Oct): 98–104. https://doi.org/10.1016/j.enbuild.2014.05.032.
Boumhaout, M., L. Boukhattem, H. Hamdi, B. Benhamou, and F. A. Nouh. 2017. “Thermomechanical characterization of a bio-composite building material: Mortar reinforced with date palm fibers mesh.” Constr. Build. Mater. 135 (Mar): 241–250. https://doi.org/10.1016/j.conbuildmat.2016.12.217.
Chen, Y. X., Q. L. Yu, and H. T. H. Brouwers. 2017. “Acoustic performance and microstructural analysis of bio-based lightweight concrete containing miscanthus.” Constr. Build. Mater. 157 (Dec): 839–851. https://doi.org/10.1016/j.conbuildmat.2017.09.161.
Chikhi, M. 2016. “Young’s modulus and thermophysical performances of bio-sources materials based on data palm fibers.” Energy Build. 129 (Oct): 589–597. https://doi.org/10.1016/j.enbuild.2016.08.034.
Chikhi, M., B. Agoudjil, A. Boudenne, and A. Gheabli. 2013. “Experimental investigation of new biocomposite with low cost for thermal insulation.” Energy Build. 66 (Nov): 267–273. https://doi.org/10.1016/j.enbuild.2013.07.019.
Collet, F., and S. Pretot. 2014. “Thermal conductivity of hemp concretes: Variation with formulation, density and water content.” Constr. Build. Mater. 65 (Aug): 612–619. https://doi.org/10.1016/j.conbuildmat.2014.05.039.
Delannoy, G., S. Marceau, P. Gle, E. Gourlay, M. Gueguen-Minerbe, D. Diafi, I. Nour, S. Amziane, and F. Farcas. 2019. “Influence of binder on the multiscale properties of hemp concrete.” Eur. J. Environ. Civ. Eng. 23 (5): 609–625. https://doi.org/10.1080/19648189.2018.1457571.
Gu, K., and B. Chen. 2020. “Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction.” Constr. Build. Mater. 231 (Jan): 117195. https://doi.org/10.1016/j.conbuildmat.2019.117195.
Haba, B., B. Agoudjil, A. Boudenne, and K. Benzarti. 2017. “Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete.” Constr. Build. Mater. 154 (Nov): 963–971. https://doi.org/10.1016/j.conbuildmat.2017.08.025.
Haik, R., A. Peled, and I. A. Meir. 2020. “The thermal performance of lime hemp concrete (LHC) with alternative binders.” Energy Build. 210 (Mar): 109740. https://doi.org/10.1016/j.enbuild.2019.109740.
Hong, J., L. Ren, J. Hong, and C. Xu. 2016. “Environmental impact assessment of corn straw utilization in China.” J. Cleaner Prod. 112 (Jan): 1700–1708. https://doi.org/10.1016/j.jclepro.2015.02.081.
Hou, D. S., H. D. Yan, J. R. Zhang, P. G. Wang, and Z. J. Li. 2016. “Experimental and computational investigation of magnesium phosphate cement mortar.” Constr. Build. Mater. 112 (Jun): 331–342. https://doi.org/10.1016/j.conbuildmat.2016.02.200.
Jami, T., S. R. Karade, and L. P. Singh. 2019. “A review of the properties of hemp concrete for green building applications.” J. Cleaner Prod. 239 (Dec): 117852. https://doi.org/10.1016/j.jclepro.2019.117852.
Jarabo, R., M. C. Monte, E. Fuente, S. F. Santos, and C. Negro. 2013. “Corn stalk from agricultural residue used as reinforcement fiber in fiber-cement production.” Ind. Crops Prod. 43 (May): 832–839. https://doi.org/10.1016/j.indcrop.2012.08.034.
Jeong, S. Y., and A. S. Wagh. 2003. “Cementing the gap between ceramics, cements, and polymers.” Mater. Technol. 18 (3): 162–168. https://doi.org/10.1080/10667857.2003.11753035.
Lang, L., H. J. Duan, and B. Chen. 2019. “Properties of pervious concrete made from steel slag and magnesium phosphate cement.” Constr. Build. Mater. 209 (Jun): 95–104. https://doi.org/10.1016/j.conbuildmat.2019.03.123.
Lang, L., N. Liu, and B. Chen. 2020. “Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO2.” Constr. Build. Mater. 230 (Jan): 116971. https://doi.org/10.1016/j.conbuildmat.2019.116971.
Li, Y., and B. Chen. 2013. “Factors that affect the properties of magnesium phosphate cement.” Constr. Build. Mater. 47 (Oct): 977–983. https://doi.org/10.1016/j.conbuildmat.2013.05.103.
Liu, Y. T., Z. Qin, and B. Chen. 2020. “Experimental research on magnesium phosphate cements modified by red mud.” Constr. Build. Mater. 231 (Jan): 117131. https://doi.org/10.1016/j.conbuildmat.2019.117131.
Lu, Z., Z. Zhao, M. Wang, and W. Jia. 2016. “Effects of corn stalk fiber content on properties of biomass brick.” Constr. Build. Mater. 127 (Nov): 11–17. https://doi.org/10.1016/j.conbuildmat.2016.09.141.
Ma, C., and B. Chen. 2017. “Experimental study on the preparation and properties of a novel foamed concrete based on magnesium phosphate cement.” Constr. Build. Mater. 137 (Apr): 160–168. https://doi.org/10.1016/j.conbuildmat.2017.01.092.
MacVicar, R., L. M. Matuana, and J. J. Balatinecz. 1999. “Aging mechanisms in cellulose fiber reinforced cement composites.” Cem. Concr. Compos. 21 (3): 189–196. https://doi.org/10.1016/S0958-9465(98)00050-X.
Marceau, S., P. Gle, M. Gueguen-Minerbe, E. Gourlay, S. Moscardelli, I. Nour, and S. Amzinane. 2017. “Influence of accelerated aging on the properties of hemp concrete.” Constr. Build. Mater. 139 (May): 524–530. https://doi.org/10.1016/j.conbuildmat.2016.11.129.
Mazhoud, B., F. Collet, S. Pretot, and J. Chamoin. 2016. “Hygric and thermal properties of hemp-lime plasters.” Build. Environ. 96 (Feb): 206–216. https://doi.org/10.1016/j.buildenv.2015.11.013.
Miller, S. A., P. R. Cunningham, and J. T. Harvey. 2019. “Rice-based ash in concrete: A review of past work and potential environmental sustainability.” Resour. Conserv. Recycl. 146 (Jul): 416–430. https://doi.org/10.1016/j.resconrec.2019.03.041.
Nassen, J., J. Holmberg, A. Wadeskog, and M. Nyman. 2007. “Direct and indirect energy use and carbon emissions in the production phase of buildings: An input-out analysis.” Energy 32 (9): 1593–1602. https://doi.org/10.1016/j.energy.2007.01.002.
Nguyen, T. T., V. Picandet, S. Amziane, and C. Baley. 2009. “Influence of compactness and hemp hurd characteristics on the mechanical properties of lime and hemp concrete.” Eur. J. Environ. Civ. Eng. 13 (9): 1039–1050. https://doi.org/10.1080/19648189.2009.9693171.
Nguyen, T. T., V. Picandet, P. Carre, T. Lecompte, S. Amziane, and C. Baley. 2010. “Effect of compaction on mechanical and thermal properties of hemp concrete.” Eur. J. Environ. Civ. Eng. 14 (5): 545–560. https://doi.org/10.1080/19648189.2010.9693246.
Panyakaew, S., and S. Fotios. 2011. “New thermal insulation boards made from coconut husk and bagasse.” Energy Build. 43 (7): 1732–1739. https://doi.org/10.1016/j.enbuild.2011.03.015.
Pierre, T., T. Colinart, and P. Glouannec. 2014. “Measurement of thermal properties of biosourced building materials.” Int. J. Thermophys. 35 (9–10): 1832–1852. https://doi.org/10.1007/s10765-013-1477-0.
Pretot, S., F. Collet, and C. Garnier. 2014. “Life cycle assessment of a hemp concrete wall: Impact of thickness and coating.” Build. Environ. 72 (Feb): 223–231. https://doi.org/10.1016/j.buildenv.2013.11.010.
Rahim, M., O. Douzane, A. D. T. Le, and T. Langlet. 2016a. “Effect of moisture and temperature on thermal properties of three bio-based materials.” Constr. Build. Mater. 111 (May): 119–127. https://doi.org/10.1016/j.conbuildmat.2016.02.061.
Rahim, M., O. Douzane, A. D. T. Le, G. Promis, and T. Langlet. 2016b. “Characterization and comparison of hygric properties of rape straw concrete and hemp concrete.” Constr. Build. Mater. 102 (Jan): 679–687. https://doi.org/10.1016/j.conbuildmat.2015.11.021.
Sheridan, J., M. Sonebi, S. Taylor, and S. Amziane. 2020. “The effect of long term weathering on hemp and rapeseed concrete.” Cem. Concr. Res. 131 (May): 106014. https://doi.org/10.1016/j.cemconres.2020.106014.
Sinka, M., P. V. Heede, N. D. Belie, D. Bajare, G. Sahmenko, and A. Korjakins. 2018. “Comparative life cycle assessment of magnesium binders as an alternative for hemp concrete.” Resour. Conserv. Recycl. 133 (Jun): 288–299. https://doi.org/10.1016/j.resconrec.2018.02.024.
Standardization Administration of China. 2013. Test methods for the concrete and brick. [In Chinese.] GB/T 4111. Beijing: China Standards Press.
Taoukil, D., A. E. Bouardi, T. Ajzoul, and H. Ezbakhe. 2012. “Effect of the incorporation of wood wool on thermos physical properties of sand mortars.” KSCE J. Civ. Eng. 16 (6): 1003–1010. https://doi.org/10.1007/s12205-012-1470-3.
Walker, R., S. Pavia, and R. Mitchell. 2014. “Mechanical properties and durability of hemp-lime concretes.” Constr. Build. Mater. 61 (Jun): 340–348. https://doi.org/10.1016/j.conbuildmat.2014.02.065.
Wang, L., I. K. M. Yu, D. C. W. Tsang, K. Yu, S. Li, C. S. Poon, and J. G. Dai. 2018. “Upcycling wood waste into fibre-reinforced magnesium phosphate cement particleboards.” Constr. Build. Mater. 159 (Jan): 54–63. https://doi.org/10.1016/j.conbuildmat.2017.10.107.
Wei, Y., C. Song, B. Chen, and M. R. Ahmad. 2019. “Experimental investigation on two new corn stalk biocomposites based on magnesium phosphate cement and ordinary portland cement.” Constr. Build. Mater. 224 (Nov): 700–710. https://doi.org/10.1016/j.conbuildmat.2019.07.100.
Xiao, H., W. Wang, and S. H. Goh. 2017. “Effectiveness study for fly ash cement improved marine clay.” Constr. Build. Mater. 157 (Dec): 1053–1064. https://doi.org/10.1016/j.conbuildmat.2017.09.070.
Zhang, G., G. Li, and T. He. 2017. “Effects of sulphoaluminate cement on the strength and water stability of magnesium potassium phosphate cement.” Constr. Build. Mater. 132 (Feb): 335–342. https://doi.org/10.1016/j.conbuildmat.2016.12.011.
Zhou, X. Y., F. Zheng, H. G. Li, and C. L. Lu. 2010. “An environment-friendly thermal insulation material from cotton stalk fibers.” Energy Build. 42 (7): 1070–1074. https://doi.org/10.1016/j.enbuild.2010.01.020.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 32 • Issue 12 • December 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jun 21, 2019
Accepted: Jun 11, 2020
Published online: Sep 22, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 22, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.