Effect of Ferrous Alloy Type, Beetroot Juice, Deicer Type and Concentration on Early-Stage Corrosion Behavior of Buried Pipes
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 10
Abstract
In this laboratory study, the corrosion behavior of ASTM A1008 CS Type B carbon steel (C1008), ASTM A48 Class 35 gray cast iron (GCCL35), and ASTM A536 65-45-12 ductile cast iron [Ductile(65-45-12)] was examined in a simulated soil solution in the presence and absence of beetroot juice (beet juice), a bioderived additive. Two types of deicers, including 23% NaCl and 30% at different dilution ratios (1:30 and 1:90), were included as the test media to simulate the practical cases of buried pipes adjacent to roadways. The corrosion behavior of the metallic samples was examined by the measurements of open circuit potential and linear polarization resistance. In addition, electrochemical impedance spectroscopy was used to study the corrosion product layer. Surface analysis of the samples was carried out using energy dispersive X-ray spectroscopy and scanning electron microscopy methods. The results showed that beet juice had corrosion inhibitory properties in diluted 23% NaCl at both dilution ratios. However, in the case of diluted 30% solution, corrosion inhibition was limited to a dilution ratio of 1:30, which shows a more pronounced effect of dilution on the corrosion inhibition in 30% compared to 23% NaCl. The protection mechanism mainly involved blocking the anodic active sites by an organic passive layer. C1008 samples showed the lowest corrosion rate in the presence and absence of beet juice in NaCl and solutions. A more protective layer formed on the samples in NaCl solution compared to , which may be due to the effect of ionic strength on the solubility.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by the National Science Foundation (NSF) through Award 1638384. They also would like to acknowledge the Wyoming Department of Transportation for providing the beet juice. The authors also thank Dr. V. Lynch-Holm at Franceschi Microscopy and Imaging Center for the EDS analysis of beet juice and Dr. O.K. Neil at Peter Hooper GeoAnalytical Lab for SEM and EDS analysis of the corroded samples.
References
AWWA (American Water Works Association). 1999. AWAA report: $325 billon for pipes. Denver: AWWA Mainstream.
Bommersbach, P. A., C. lemany-Dumont, J. P. Millet, and B. Normand. 2005. “Formation and behaviour study of an environment-friendly corrosion inhibitor by electrochemical methods.” Electrochim. Acta 51 (6): 1076–1084. https://doi.org/10.1016/j.electacta.2005.06.001.
Celik, E., I. Ozdemir, E. Avci, and Y. Tsunekawa. 2005. “Corrosion behaviour of plasma sprayed coatings.” Surf. Coat. Technol. 193 (1–3): 297–302. https://doi.org/10.1016/j.surfcoat.2004.08.143.
El-Lateef, H. M. A., A.-R. El-Sayed, H. S. Mohran, and H. A. S. Shilkamy. 2019. “Corrosion inhibition and adsorption behavior of phytic acid on Pb and Pb–In alloy surfaces in acidic chloride solution.” Int. J. Ind. Chem. 10 (1): 31–47. https://doi.org/10.1007/s40090-019-0169-4.
Emran, K. M. 2015. “Effects of concentration and temperature on the corrosion properties of the Fe–Ni–Mn alloy in HCl solutions.” Res. Chem. Intermed. 41 (6): 3583–3596. https://doi.org/10.1007/s11164-013-1473-9.
Ferreira, E. S., C. Giacomelli, F. C. Giacomelli, and A. Spinelli. 2004. “Evaluation of the inhibitor effect of l-ascorbic acid on the corrosion of mild steel.” Mater. Chem. Phys. 83 (1): 129–134. https://doi.org/10.1016/j.matchemphys.2003.09.020.
Folkman, S. 2018. Water main break rates in the USA and Canada: A comprehensive study. Logan, UT: Utah State Univ.
Guo, R., Y. Zheng, Z. Ma, X. Lian, H. Sun, C. Han, H. Ding, Q. Xu, X. Yu, J. Zhu, and W. Chen. 2019. “Surface passivation of black phosphorus via van der Waals stacked PTCDA.” Appl. Surf. Sci. 496: 143688. https://doi.org/10.1016/j.apsusc.2019.143688.
Honarvar Nazari, M., X. Shi, E. Jackson, Z. Yan, and Y. Li. 2017. “Laboratory investigation of washing practices and bio-based additive for mitigating metallic corrosion by magnesium chloride deicer.” J. Mater. Civ. Eng. 29 (1): 04016187. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001727.
Howe, K. J., D. W. Hand, J. C. Crittenden, R. R. Trussell, and G. Tchobanoglous. 2012. Principles of water treatment. New York: Wiley.
Jamil, H. E., A. Shiri, R. Boulif, C. Bastos, M. F. Montemor, and M. G. S. Ferreira. 2004. “Electrochemical behaviour of amino alcohol-based inhibitors used to control corrosion of reinforcing steel.” Electrochim. Acta 49 (17–18): 2753–2760. https://doi.org/10.1016/j.electacta.2004.01.041.
Ma, H., X. Cheng, G. Li, S. Chen, Z. Quan, S. Zhao, and L. Niu. 2000. “The influence of hydrogen sulfide on corrosion of iron under different conditions.” Corros. Sci. 42 (10): 1669–1683. https://doi.org/10.1016/S0010-938X(00)00003-2.
McNeill, L. S., and M. Edwards. 2001. “Iron pipe corrosion in distribution systems.” J. Am. Water Works Assoc. 93 (7): 88–100. https://doi.org/10.1002/j.1551-8833.2001.tb09246.x.
McNeill, L. S., and M. Edwards. 2002. “The importance of temperature in assessing iron pipe corrosion in water distribution systems.” Environ. Monit. Assess. 77 (3): 229–242. https://doi.org/10.1023/A:1016021815596.
Muthumani, A., L. Fay, M. Akin, S. Wang, J. Gong, and X. Shi. 2014. “Correlating lab and field tests for evaluation of deicing and anti-icing chemicals: A review of potential approaches.” Cold Reg. Sci. Technol. 97 (Jan): 21–32. https://doi.org/10.1016/j.coldregions.2013.10.001.
Padilla, V., P. Ghods, and A. Alfantazi. 2013. “Effect of de-icing salts on the corrosion performance of galvanized steel in sulphate contaminated soil.” Constr. Build. Mater. 40 (Mar): 908–918. https://doi.org/10.1016/j.conbuildmat.2012.09.077.
Roberge, P. 1999. Handbook of corrosion engineering. New York: McGraw-Hill Professional.
Rufford, T. E., D. Hulicova-Jurcakova, K. Khosla, Z. Zhu, and G. Q. Lu. 2010. “Microstructure and electrochemical double-layer capacitance of carbon electrodes prepared by zinc chloride activation of sugar cane bagasse.” J. Power Sour. 195 (3): 912–918. https://doi.org/10.1016/j.jpowsour.2009.08.048.
Selvi, J. A., S. Rajendran, V. G. Sri, A. J. Amalraj, and B. Narayanasamy. 2009. “Corrosion inhibition by beet root extract.” Portugaliae Electrochim. Acta 27 (1): 1–11. https://doi.org/10.4152/pea.200901001.
Sherif, E.-S. M., A. A. Almajid, F. H. Latif, and H. Junaedi. 2011. “Effects of graphite on the corrosion behavior of aluminum- graphite composite in sodium chloride solutions.” Int. J. Electrochem. Sci. 6 (Apr): 16.
Shi, X., K. Fortune, R. Smithlin, M. Akin, and L. Fay. 2013. “Exploring the performance and corrosivity of chloride deicer solutions: Laboratory investigation and quantitative modeling.” Cold Reg. Sci. Technol. 86 (Feb): 36–44. https://doi.org/10.1016/j.coldregions.2012.10.011.
Shihab, M. S., M. H. Nazari, and L. Fay. 2016. “Study of inhibition effect of pyridinium salt derivative on corrosion of C1010 carbon steel in saline solution.” Prot. Met. Phys. Chem. Surf. 52 (4): 714–720. https://doi.org/10.1134/S2070205116040213.
Trowbridge, P. R., J. S. Kahl, D. A. Sassan, D. L. Heath, and E. M. Walsh. 2010. “Relating road salt to exceedances of the water quality standard for chloride in New Hampshire streams.” Environ. Sci. Technol. 44 (13): 4903–4909. https://doi.org/10.1021/es100325j.
Usman, B. J., Z. M. Gasem, S. A. Umoren, and M. M. Solomon. 2019. “Eco-friendly 2-Thiobarbituric acid as a corrosion inhibitor for API 5L X60 steel in simulated sweet oilfield environment: Electrochemical and surface analysis studies.” Sci. Rep. 9 (1): 1–17. https://doi.org/10.1038/s41598-018-37049-w.
Vignisdottir, H. R., B. Ebrahimi, G. K. Booto, R. O’Born, H. Brattebø, H. Wallbaum, and R. A. Bohne. 2019. “A review of environmental impacts of winter road maintenance.” Cold Reg. Sci. Technol. 158 (Feb): 143–153. https://doi.org/10.1016/j.coldregions.2018.10.013.
Willey, J. D. 2004. “The effect of ionic strength on the solubility of an electrolyte.” J. Chem. Educ. 81 (11): 1644. https://doi.org/10.1021/ed081p1644.
Xi, Y., and Z. Xie. 2002. Corrosion effects of magnesium chloride and sodium chloride on automobile components. Denver: Colorado DOT.
Zhang, D.-Q., L.-X. Gao, and G.-D. Zhou. 2010. “Self-assembled urea-amine compound as vapor phase corrosion inhibitor for mild steel.” Surf. Coat. Technol. 204 (9–10): 1646–1650. https://doi.org/10.1016/j.surfcoat.2009.10.054.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Oct 24, 2019
Accepted: Mar 24, 2020
Published online: Jul 24, 2020
Published in print: Oct 1, 2020
Discussion open until: Dec 24, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.