Impact of Additives on Low-Temperature Cracking Properties of Soft Binders Used in Cold Regions
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 10
Abstract
Low-temperature cracking is the main distress in asphalt pavement in cold regions (such as the arctic and subarctic regions) as the climate in these areas is severe in winter. While soft asphalt binders (such as PG 52-34 and PG 52-28) are used in the cold regions, asphalt pavements can still exhibit premature cracking failures. One of the approaches to solve this issue is to modify binders using additives. However, it is not clear which additives can significantly improve the thermal cracking resistance of binders. Therefore, there is a need to find potential additives resulting in improved resistance to thermal cracking because of extreme low temperatures experienced in cold regions. In this study, five additives [nano , nano , styrene-butadiene-styrene (SBS), ground tire rubber (GTR), and corn oil-based softening agent (SA)] were applied at various dosages with two soft base binders (PG 52-28 and PG 64E-40). Performance properties of modified binders were evaluated using the dynamic shear rheometer (DSR), standard bending beam rheometer (BBR), and modified BBR. The testing results indicated that the combination of a 7% softening agent and 7.5% SBS exhibited the highest improvement in the resistance to thermal cracking. Meanwhile, this combination also resulted in two performance grade bumps at high temperatures. Based on the laboratory testing results, the combination of a softening agent and high SBS could be potential additives to create high-performance binders for cold regions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The experiments described and the resulting data presented in this study, unless otherwise noted, were funded under PE 0602784A, Project T53 Military Engineering Applied Research, Task 08 under Contract W913E518C0008, managed by the US Army Engineer Research and Development Center (ERDC). The work described in this paper was conducted at Rowan University’s Center for Research and Education in Advanced Transportation Engineering Systems (CREATEs), Mullica Hill, NJ. Permission was granted by the Director, Geotechnical and Structures Laboratory, to publish this information. Also, the authors would like to thank Bob Kluttz for his help in the asphalt binder modification.
References
AASHTO. 2010. Standard specification for performance graded asphalt binder. AASHTO M320. Washington, DC: AASHTO.
AASHTO. 2012a. Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). AASHTO T313. Washington, DC: AASHTO.
AASHTO. 2012b. Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). AASHTO T315. Washington, DC: AASHTO.
AASHTO. 2012c. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). AASHTO R28. Washington, DC: AASHTO.
AASHTO. 2013. Standard method of test for effect of heat and air on a moving film of asphalt binder (rolling thin-film oven test). AASHTO T240. Washington, DC: AASHTO.
Aflaki, S., and P. Hajikarimi. 2012. “Implementing viscoelastic rheological methods to evaluate low temperature performance of modified asphalt binders.” Constr. Build. Mater. 36 (Nov): 110–118. https://doi.org/10.1016/j.conbuildmat.2012.04.076.
Anderson, D. A., L. Lapalu, M. O. Marasteanu, Y. M. Le Hir, J. P. Planche, and D. Martin. 2001. “Low-temperature thermal cracking of asphalt binders as ranked by strength and fracture properties.” Transp. Res. Rec. 1766 (1): 1–6. https://doi.org/10.3141/1766-01.
Glaoui, B., M. Merbouh, M. Van de Ven, E. Chailleux, and A. Youcefi. 2012. “Thermal fatigue of polymer modified bitumen.” J. Thermoplast. Compos. Mater. 25 (4): 469–478. https://doi.org/10.1177/0892705711412645.
Hesp, S. 2004. Development of a fracture mechanics-based asphalt binder test method for low temperature performance prediction. Washington, DC: Transportation Research Board.
Isacsson, U., and H. Zeng. 1998. “Low-temperature cracking of polymer-modified asphalt.” Mater. Struct. 31 (1): 58–63. https://doi.org/10.1007/BF02486415.
Kim, H. H., M. S. Lee, and S. J. Lee. 2019. “Performance evaluation of polymer modified asphalt (PMA) binders containing ground tire rubber (GTR).” Int. J. Pavement Res. Technol. 12 (2): 215–222. https://doi.org/10.1007/s42947-019-0027-y.
Kim, S. 2010. Asphalt binder cracking device to reduce low temperature asphalt pavement cracking: Final report. Athens, Greece: EZ Asphalt Technology, LLC.
Kim, S. S., Z. D. Wysong, and J. Kovach. 2006. “Low-temperature thermal cracking of asphalt binder by asphalt binder cracking device.” Transp. Res. Rec. 1962 (1): 28–35. https://doi.org/10.1177/0361198106196200104.
Kliewer, J. E., H. Zeng, and T. S. Vinson. 1996. “Aging and low-temperature cracking of asphalt concrete mixture.” J. Cold Reg. Eng. 10 (3): 134–148. https://doi.org/10.1061/(ASCE)0887-381X(1996)10:3(134).
Lin, P., W. Huang, Y. Li, N. Tang, and F. Xiao. 2017. “Investigation of influence factors on low temperature properties of SBS modified asphalt.” Constr. Build. Mater. 154 (Nov): 609–622. https://doi.org/10.1016/j.conbuildmat.2017.06.118.
Matias De Oliveira, J., T. Yan, M. Turos, D. Ghosh, D. Van Deusen, and M. Marasteanu. 2019. “Simple method to evaluate strength and relaxation properties of asphalt binders at low temperature.” Transp. Res. Rec. 2673 (6): 492–500. https://doi.org/10.1177/0361198119853544.
Mullin, A., J. Liu, and R. McHattie. 2014. “Field evaluation of crack sealing of AC pavements in Alaska.” In Proc., Int. Symp. of Climatic Effects on Pavement and Geotechnical Infrastructure, 39–51. Reston, VA: ASCE.
Pasquini, E., F. Canestrari, F. Cardone, and F. A. Santagata. 2011. “Performance evaluation of gap graded asphalt rubber mixtures.” Constr. Build. Mater. 25 (4): 2014–2022. https://doi.org/10.1016/j.conbuildmat.2010.11.048.
Sabaraya, I. V., A. Filonzi, R. Hajj, D. Das, N. B. Saleh, and A. Bhasin. 2018. “Ability of nanomaterials to effectively disperse in asphalt binders for use as a modifier.” J. Mater. Civ. Eng. 30 (8): 04018166. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002315.
Sun, L., X. Xin, and J. Ren. 2017. “Asphalt modification using nano-materials and polymers composite considering high and low temperature performance.” Constr. Build. Mater. 133 (Feb): 358–366. https://doi.org/10.1016/j.conbuildmat.2016.12.073.
Tan, Y. Q., L. Zhang, and X. Y. Zhang. 2012. “Investigation of low-temperature properties of diatomite-modified asphalt mixtures.” Constr. Build. Mater. 36 (Nov): 787–795.
Tran, N., A. Taylor, and R. Willis. 2012. Effect of rejuvenator on performance properties of HMA mixtures with high RAP and RAS contents.. Auburn, AL: National Center for Asphalt Technology.
USDOD (Department of Defense). 2018. “Unified facilities criteria 3-250-03.” Accessed October 2, 2018. https://www.wbdg.org/FFC/DOD/UFC/ufc_3_250_03_2018.pdf.
Vahidi, S., W. S. Mogawer, and A. Booshehrian. 2014. “Effects of GTR and treated GTR on asphalt binder and high-RAP mixtures.” J. Mater. Civ. Eng. 26 (4): 721–727. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000858.
Vinson, T. S., V. C. Janoo, and R. C. Haas. 1989. Summary report, low temperature and thermal fatigue cracking. Washington, DC: Transportation Research Board.
Wang, T., F. Xiao, S. Amirkhanian, W. Huang, and M. Zheng. 2017. “A review on low temperature performances of rubberized asphalt materials.” Constr. Build. Mater. 145 (Aug): 483–505. https://doi.org/10.1016/j.conbuildmat.2017.04.031.
Xie, Z., P. Turnera, A. Taylor, N. Tran, and A. McCurdy. 2018. “Laboratory evaluation of performance properties of asphalt binders and mixes containing a new rejuvenator.” J. Assoc. Asphalt Paving Technol. 87 (Jan): 623–655.
Yao, H., Q. Dai, Z. You, M. Ye, and Y. K. Yap. 2016. “Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder.” Constr. Build. Mater. 113 (Jun): 988–996. https://doi.org/10.1016/j.conbuildmat.2016.03.152.
Zhang, H. L., M. M. Su, S. F. Zhao, Y. P. Zhang, and Z. P. Zhang. 2016. “High and low temperature properties of nano-particles/polymer modified asphalt.” Constr. Build. Mater. 114 (Jul): 323–332. https://doi.org/10.1016/j.conbuildmat.2016.03.118.
Zhang, L., H. Bahia, and Y. Q. Tan. 2015. “Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders.” Constr. Build. Mater. 86 (Jul): 95–100.
Zhao, S., J. Liu, P. Li, and T. Burritt. 2017. “Asphalt binder adaption for climatic conditions in cold regions: Alaska experience.” J. Mater. Civ. Eng. 29 (1): 04016184. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001709.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 9, 2019
Accepted: Mar 17, 2020
Published online: Jul 28, 2020
Published in print: Oct 1, 2020
Discussion open until: Dec 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.