Sulphuric Acid Resistance of Cementitious Materials: Multiscale Approach to Assessing the Degradation
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 7
Abstract
The deterioration of conventional cement (CC) and alkali-activated (AA) cementitious materials when exposed to sulphuric acid is influenced by the scale, both in terms of scale of manufacture (paste, mortar, and concrete) and level of observation (microscopic to macroscopic). The degradation of samples at the microscale was examined using scanning electron microscopy, energy dispersive x-ray, x-ray diffraction, Fourier transform infrared spectroscopy, and microcomputed tomography. Macroscopic measurements were used to establish the cross-section change, mass loss, and compressive strength. In addition, the ion change in the reservoir solution was examined using inductively coupled plasma mass spectroscopy. Microscale and macroscale measurements highlight the fundamental difference in the degradation of CC and AA materials, and therefore current simple indicator tests are inadequate for comparing the performance of materials.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Aiken, T. A., J. Kwasny, W. Sha, and M. N. Soutsos. 2018. “Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attack.” Cem. Concr. Res. 111 (Sep): 23–40. https://doi.org/10.1016/j.cemconres.2018.06.011.
Alexander, G. B., W. Heston, and R. K. Iler. 1954. “The solubility of amorphous silica in water.” J. Phys. Chem. 58 (6): 453–455. https://doi.org/10.1021/j150516a002.
Alexander, M., A. Bertron, and N. De Belie. 2013. Performance of cement-based materials in aggressive aqueous environments. Dordrecht, Netherlands: Springer.
Allahverdi, A., and F. Skvara. 2001a. “Nitric acid attack on hardened paste of geopolymeric cements. 1.” Ceram. Silik. 45 (3): 81–88.
Allahverdi, A., and F. Skvara. 2001b. “Nitric acid attack on hardened paste of geopolymeric cements. 2.” Ceram. Silik. 45 (4): 143–150.
Allahverdi, A., and F. Skvara. 2005. “Sulfuric acid attack on hardened paste of geopolymer cements. 1: Mechanism of corrosion at relatively high concentrations.” Ceram. Silik. 49 (4): 225.
Ariffin, M., M. Bhutta, M. Hussin, M. M. Tahir, and N. Aziah. 2013. “Sulfuric acid resistance of blended ash geopolymer concrete.” Constr. Build. Mater. 43 (Jun): 80–86. https://doi.org/10.1016/j.conbuildmat.2013.01.018.
AS (Standards Australia). 2010. General purpose and blended cements. AS 3972. Sydney, Australia: AS.
AS (Standards Australia). 2014. Methods of testing concrete. AS 1012. Sydney, Australia: AS.
ASTM. 2018. Standard test method for length change of hydraulic-cement mortars exposed to a sulfate solution. ASTM C1012. West Conshohocken, PA: ASTM.
Bakharev, T. 2005. “Resistance of geopolymer materials to acid attack.” Cem. Concr. Res. 35 (4): 658–670. https://doi.org/10.1016/j.cemconres.2004.06.005.
Bazant, Z. P. 1976. “Instability, ductility, and size effect in strain-softening concrete.” J. Eng. Mech. Div. 102 (2): 331–344.
Bernal, S. A., J. L. Provis, V. Rose, and R. M. De Gutierrez. 2011. “Evolution of binder structure in sodium silicate-activated slag-metakaolin blends.” Cem. Concr. Compos. 33 (1): 46–54. https://doi.org/10.1016/j.cemconcomp.2010.09.004.
Bouis, P. A. 2006. Reagent chemicals: Specifications and procedures. 10th ed. Washington, DC: American Chemical Society Committee on Analytical Reagents, Oxford University Press.
Buvignier, A., C. Patapy, M. P. Lavigne, E. Paul, and A. Bertron. 2019. “Resistance to biodeterioration of aluminium-rich binders in sewer network environment: Study of the possible bacteriostatic effect and role of phase reactivity.” Cem. Concr. Res. 123 (Sep): 105785. https://doi.org/10.1016/j.cemconres.2019.105785.
Chindaprasirt, P., and U. Rattanasak. 2016. “Improvement of durability of cement pipe with high calcium fly ash geopolymer covering.” Constr. Build. Mater. 112 (Jun): 956–961. https://doi.org/10.1016/j.conbuildmat.2016.03.023.
Chukanov, N. V. 2013. Infrared spectra of mineral species: Extended library. Dordrecht, Netherlands: Springer.
De Belie, N., J. Monteny, A. Beeldens, E. Vincke, D. Van Gemert, and W. Verstraete. 2004. “Experimental research and prediction of the effect of chemical and biogenic sulfuric acid on different types of commercially produced concrete sewer pipes.” Cem. Concr. Res. 34 (12): 2223–2236. https://doi.org/10.1016/j.cemconres.2004.02.015.
De Belie, N., J. Monteny, and L. Taerwe. 2002. “Apparatus for accelerated degradation testing of concrete specimens.” Mater. Struct. 35 (7): 427–433. https://doi.org/10.1007/BF02483147.
Ehrich, S., L. Helard, R. Letourneux, J. Willocq, and E. Bock. 1999. “Biogenic and chemical sulfuric acid corrosion of mortars.” J. Mater. Civ. Eng. 11 (4): 340–344. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(340).
Elaqra, H., N. Godin, G. Peix, M. R’Mili, and G. Fantozzi. 2007. “Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: Effects of the sand/cement ratio.” Cem. Concr. Res. 37 (5): 703–713. https://doi.org/10.1016/j.cemconres.2007.02.008.
Flanigan, E. M., and L. B. Sand. 1974. Molecular Sieve Zeolites-I, 101. Washington, DC: American Chemical Society.
Gabrisova, A., J. Havlica, and S. Sahu. 1991. “Stability of calcium sulphoaluminate hydrates in water solutions with various pH values.” Cem. Concr. Res. 21 (6): 1023–1027.
García-Lodeiro, I., A. Fernández-Jiménez, M. T. Blanco, and A. Palomo. 2008. “FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H.” J. Sol-Gel. Sci. Technol. 45 (1): 63–72. https://doi.org/10.1007/s10971-007-1643-6.
Grengg, C., F. Mittermayr, N. Ukrainczyk, G. Koraimann, S. Kienesberger, and M. Dietzel. 2018. “Advances in concrete materials for sewer systems affected by microbial induced concrete corrosion: A review.” Water Res. 134 (May): 341–352. https://doi.org/10.1016/j.watres.2018.01.043.
Gu, L., T. Bennett, and P. Visintin. 2019. “Sulphuric acid exposure of conventional concrete and alkali-activated concrete: Assessment of test methodologies.” Constr. Build. Mater. 197 (Feb): 681–692. https://doi.org/10.1016/j.conbuildmat.2018.11.166.
Gu, L., P. Visintin, and T. Bennett. 2018. “Evaluation of accelerated degradation test methods for cementitious composites subject to sulfuric acid attack; application to conventional and alkali-activated concretes.” Cem. Concr. Compos. 87 (Mar): 187–204. https://doi.org/10.1016/j.cemconcomp.2017.12.015.
Herisson, J., E. D. Van Hullebusch, M. Moletta-Denat, P. Taquet, and T. Chaussadent. 2013. “Toward an accelerated biodeterioration test to understand the behavior of portland and calcium aluminate cementitious materials in sewer networks.” Int. Biodeterior. Biodegrad. 84 (Oct): 236–243. https://doi.org/10.1016/j.ibiod.2012.03.007.
Iler, R. K. 1955. The colloid chemistry of silica and silicates. Ithaca, NY: Cornell University Press.
Izzat, A. M., A. M. M. Al Bakri, H. Kamarudin, L. M. Moga, G. C. M. Ruzaidi, M. T. M. Faheem, and A. V. Sandu. 2013. “Microstructural analysis of geopolymer and ordinary portland cement mortar exposed to sulfuric acid.” Mater. Plast. 50 (3): 171–174.
Kawai, K., S. Yamaji, and T. Shinmi. 2005. “Concrete deterioration caused by sulfuric acid attack.” In Proc., 10th DBMC Int. Conf. on Durability of Building Materials and Component, 17–20. Paris: Rilem.
Kupwade-Patil, K., S. D. Palkovic, A. Bumajdad, C. Soriano, and O. Büyüköztürk. 2018. “Use of silica fume and natural volcanic ash as a replacement to portland cement: Micro and pore structural investigation using NMR, XRD, FTIR and X-ray microtomography.” Constr. Build. Mater. 158 (Jan): 574–590. https://doi.org/10.1016/j.conbuildmat.2017.09.165.
Lee, N., and H.-K. Lee. 2016. “Influence of the slag content on the chloride and sulfuric acid resistances of alkali-activated fly ash/slag paste.” Cem. Concr. Compos. 72 (Sep): 168–179. https://doi.org/10.1016/j.cemconcomp.2016.06.004.
Lee, W., and J. Van Deventer. 2003. “Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosilicates.” Langmuir 19 (21): 8726–8734. https://doi.org/10.1021/la026127e.
Li, C., H. Sun, and L. Li. 2010. “A review: The comparison between alkali-activated slag (Si+ Ca) and metakaolin (Si+ Al) cements.” Cem. Concr. Res. 40 (9): 1341–1349. https://doi.org/10.1016/j.cemconres.2010.03.020.
Lloyd, R. R., J. L. Provis, and J. S. van Deventer. 2009. “Microscopy and microanalysis of inorganic polymer cements. 1: Remnant fly ash particles.” J. Mater. Sci. 44 (2): 608–619. https://doi.org/10.1007/s10853-008-3077-0.
Lloyd, R. R., J. L. Provis, and J. S. van Deventer. 2012. “Acid resistance of inorganic polymer binders. 1: Corrosion rate.” Mater. Struct. 45 (1–2): 1–14. https://doi.org/10.1617/s11527-011-9744-7.
Lodeiro, I. G., D. E. Macphee, A. Palomo, and A. Fernández-Jiménez. 2009. “Effect of alkalis on fresh C–S–H gels: FTIR analysis.” Cem. Concr. Res. 39 (3): 147–153. https://doi.org/10.1016/j.cemconres.2009.01.003.
Monteny, J., N. De Belie, and L. Taerwe. 2003. “Resistance of different types of concrete mixtures to sulfuric acid.” Mater. Struct. 36 (4): 242–249. https://doi.org/10.1007/BF02479618.
Monteny, J., E. Vincke, A. Beeldens, N. De Belie, L. Taerwe, D. Van Gemert, and W. Verstraete. 2000. “Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete.” Cem. Concr. Res. 30 (4): 623–634. https://doi.org/10.1016/S0008-8846(00)00219-2.
Myneni, S. C., S. J. Traina, G. A. Waychunas, and T. J. Logan. 1998. “Vibrational spectroscopy of functional group chemistry and arsenate coordination in ettringite.” Geochim. Cosmochim. Acta 62 (21–22): 3499–3514. https://doi.org/10.1016/S0016-7037(98)00221-X.
Pavlik, V. 1994a. “Corrosion of hardened cement paste by acetic and nitric acids. I: Calculation of corrosion depth.” Cem. Concr. Res. 24 (3): 551–562. https://doi.org/10.1016/0008-8846(94)90144-9.
Pavlík, V. 1994b. “Corrosion of hardened cement paste by acetic and nitric acids. II: Formation and chemical composition of the corrosion products layer.” Cem. Concr. Res. 24 (8): 1495–1508. https://doi.org/10.1016/0008-8846(94)90164-3.
Provis, J. L., A. Palomo, and C. Shi. 2015. “Advances in understanding alkali-activated materials.” Cem. Concr. Res. 78 (Dec): 110–125. https://doi.org/10.1016/j.cemconres.2015.04.013.
Provis, J. L., and J. S. J. Van Deventer. 2009. Geopolymers: Structures, processing, properties and industrial applications. Cambridge, UK: Woodhead.
Rovnaník, P. 2010. “Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer.” Constr. Build. Mater. 24 (7): 1176–1183. https://doi.org/10.1016/j.conbuildmat.2009.12.023.
Sata, V., A. Sathonsaowaphak, and P. Chindaprasirt. 2012. “Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack.” Cem. Concr. Compos. 34 (5): 700–708. https://doi.org/10.1016/j.cemconcomp.2012.01.010.
Taylor, H. F. W. 1997. Cement chemistry. London: Thomas Telford.
Thokchom, S., P. Ghosh, and S. Ghosh. 2009. “Resistance of fly ash based geopolymer mortars in sulfuric acid.” ARPN J. Eng. Appl. Sci. 4 (1): 65–70.
Yuan, H., P. Dangla, P. Chatellier, and T. Chaussadent. 2013. “Degradation modelling of concrete submitted to sulfuric acid attack.” Cem. Concr. Res. 53 (Nov): 267–277. https://doi.org/10.1016/j.cemconres.2013.08.002.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 11, 2019
Accepted: Jan 6, 2020
Published online: Apr 24, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 24, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.