Case Study on Quick Treatment of Voids under Airport Pavement by Polymer Grouting
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 7
Abstract
This research presents a practice for quick treatment of voids in airport concrete pavements. Through combining two nondestructive test technologies, heavy weight deflectometry and ground penetrating radar, and polymer grouting materials, the current structural conditions of the pavement were evaluated, diseases were identified, and voids in the pavements were treated and filled. Accordingly, the damaged airport pavement was quickly rehabilitated, providing a practical method for the rapid treatment of voids in the concrete slab.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the National Key Research & Development Program of China (Grant No. 2016YFC0802203).
References
AASHTO. 1993. Guide for design of pavement structures—Part II rigid pavement design & rigid pavement joint design. Washington, DC: AASHTO.
AASHTO. 2010. Local calibration of the mechanistic-empirical pavement design guide. Washington, DC: AASHTO.
Abu Al-Eis, K., and I. K. LaBarca. 2007. Evaluation of the Uretek method of pavement lifting. Madison, WI: Wisconsin Department of Transportation.
Ahmed, Z., K. Helali, A. A. Jumilis, and R. A. Khan. 2004. “Enhancing the pavement management systems database through incorporation of GPR and core data.” In Proc., 83rd Annual Meeting on TRB. Washington, DC: Transportation Research Board.
Buzzi, O., S. Fityus, and S. Sloan. 2010. “Use of expanding polyurethane resin to remediate expansive soil foundations.” Can. Geotech. J. 47 (6): 623–634. https://doi.org/10.1139/T09-132.
Cao, Y., B. B. Guzina, and J. F. Labuz. 2008. Pavement evaluation using ground penetrating radar final report. St. Paul, MI: Minnesota DOT.
Corley-Lay, J., and C. S. Morrison. 2001. “Layer thickness variability for flexible pavements in North Carolina.” Transp. Res. Rec. 1778 (1): 107–112. https://doi.org/10.3141/1778-13.
Guo, C., and F. Wang. 2009. “Research on polymer injection technology for quick tunnel repairmen.” In Proc., GeoHunan Int. Conf. (GSP 191), 110–117. Zhengzhou: Zhengzhou Univ.
Hao, M., F. Wang, X. Li, B. Zhang, and Y. Zhong. 2018. “Numerical and experimental studies of diffusion law of grouting with expansible polymer.” J. Mater. Civ. Eng. 30 (2): 04017290. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002130.
Naudts, A. 2003. “Irreversible changes in the grouting industry caused by polyurethane grouting: An overview of 30 years of polyurethane grouting.” In Proc., 3rd Int. Specialty Conf. on Grouting and Ground Treatment, 1266–1280. New Orleans: Geo-Institute of the American Society of Civil Engineers.
Noureldin, S., K. Zhu, S. Li, and D. Harris. 2003. “Network pavement evaluation using falling weight deflectometer and ground penetrating radar.” In Proc., 82nd Annual Meeting on TRB. Washington, DC: Transportation Research Board.
Shi, M., F. Wang, and J. Luo. 2010. “Experimental research on compressive strength of polymer grouting material under different temperatures.” J. Wuhan Univ. Technol. (Mater. Sci. Ed.) 25 (6): 962–965. https://doi.org/10.1007/s11595-010-0129-5.
Tourcher, M. 1989. “Use of polyurethane resin for sealing test boreholes at cogema vendee.” Indust. Miner. 71 (16): 105–107. https://doi.org/10.1016/0148-9062(90)94649-E.
URETEK Technical Staff in Collaboration with Padua University IMAGE Department. 2004. Technical notes and laboratory test results on the latest generation of the Uretek Geoplus expanding resin. Skelmersdale: Uretek UK.
Valentino, R., E. Romeo, and A. Misra. 2013. “Mechanical aspects of micropiles made of reinforced polyurethane resins.” Geotech. Geol. Eng. 31 (2): 463–478. https://doi.org/10.1007/s10706-012-9599-x.
Wang, F. M., M. S. Shi, H. J. Li, and Y. H. Zhong. 2011. “Experimental study on the anti-permeability properties of polymer grouting materials.” Adv. Mater. Res. 284–286: 1952–1955. https://doi.org/10.4028/www.scientific.net/AMR.284-286.1952.
Youn, S. W., P. K. Seo, and C. G. Kang. 2005. “A study on nano-deformation behavior of rheo-formed Al–Si alloy based on depth-sensing indentation with three-dimensional surface analysis.” J. Mater. Process. Technol. 162–163: 260–266. https://doi.org/10.1016/j.jmatprotec.2005.02.026.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 32 • Issue 7 • July 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Oct 29, 2018
Accepted: Dec 13, 2019
Published online: Apr 20, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.