Verification of a New Semidiscrete Beam Model for Fiber-Reinforced Concrete Beams
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 7
Abstract
This article shows through the analysis of three independent tests that the presented new semidiscrete analytical (SDA) beam model is efficiently applicable in the evaluation of test results. The model is based on fracture mechanics, takes the real distribution of the macrofibers into consideration in the critical cross-section of the beam, and uses a precise approximation of the pull-out behavior of the fibers. The SDA model is applicable to evaluate synthetic and also steel fiber reinforced concrete beams. Furthermore, it is shown that the new method can predict the changes of the residual loadbearing capacity caused by the different length, diameter, tensile strength, maximal friction stress, or other features of the fiber with the use of only one series of experiments with given fiber parameters (e.g., tests with only one fiber length and diameter). Thus, the application of the SDA model can decrease the cost and time of testing new types of fibers because the required number of samples and, therefore, the total time of the lab tests can be radically decreased.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code used during the study were provided by a third party (experimental data of Olivér Czoboly, Károly Péter Juhász, and Vivien Kis). Direct requests for these materials may be made to the provider, as indicated in the “Acknowledgments.”
Some or all data, models, or code generated or used during the study are available from the corresponding author by request (SageMath code for the calculations).
Acknowledgments
The authors would like to thank Olivér Czoboly, Vivien Kis, and Károly Péter Juhász for sharing the experimental results.
References
ACI (American Concrete Institute). 1998. Design considerations for steel fiber reinforced concrete. ACI 544.4R-88. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2002. State-of-the-art report on fiber reinforced concrete. ACI 544.1R-96. Farmington Hills, MI: ACI.
Bazant, Z. P., and J. Planas. 1998. “Cohesive crack models.” Chap. 7 in Fracture and size effect in concrete and other quasibrittle materials, 157–209. London: CRC Press.
BS EN (British-Adopted European Standard). 2006. Fibres for concrete. Polymer fibres. Definitions, specifications and conformity. BS EN 14889-2. Brussels, Belgium: BS EN.
CNR (Consiglio Nazionale delle Ricerche). 2006. Guide for the design and construction of fiber-reinforced concrete structures. CNR-DT 204. Rome: CNR.
Czoboly, O. 2016. “A keverési idő és a keverési mód hatása a szálak és a szálerősítésű betonok jellemzőire.” [In Hungarian.] Ph.D. thesis, Faculty of Civil Engineering, Budapest Univ. of Technology and Economics.
Czoboly, O., and L. G. Balázs. 2016. “Influence of mixing time to the properties of steel fibres and steel fibres reinforced concrete.” Concr. Struct. 17 (2): 23–28.
Czoboly, O., and L. Gy Balázs. 2017. “Are fibres sensitive for mixing?” Struct. Concr. 18 (1): 19–28. https://doi.org/10.1002/suco.201600039.
di Prisco, M., M. Colombo, and D. Dozio. 2013. “Fibre-reinforced concrete in fib Model Code 2010: Principles, models and test validation.” Struct. Concr. 14 (4): 342–361. https://doi.org/10.1002/suco.201300021.
Dupont, D., and L. Vandewalle. 2005. “Distribution of steel fibres in rectangular sections.” Cem. Concr. Compos. 27 (3): 391–398. https://doi.org/10.1016/j.cemconcomp.2004.03.005.
Hillerborg, A., M. Modéer, and P. E. Petersson. 1976. “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res. 6 (6): 773–781. https://doi.org/10.1016/0008-8846(76)90007-7.
Juhász, K. P., and V. Kis. 2017. “The effect of the length of macro synthetic fibres on their performance in concrete.” In Vol. 246 of Proc., IOP Conf. Series: Materials Science and Engineering, 012027. Redcliffe, Bristol: IOP Publishing. https://doi.org/10.1088/1757-899X/246/1/012027.
Lee, S. C., J. Y. Cho, and F. J. Vecchio. 2011. “Diverse embedment model for steel fiber-reinforced concrete in tension: Model verification.” ACI Mater. J. 108 (5): 526–535. https://doi.org/10.14359/51683262.
ÖVBB (Österreichische Vereinigung für Beton- und Bautechnik). 2008. Richtlinie ‘Faserbeton’. [In German.] Vienna, Austria: ÖVBB.
Tóth, M., K. P. Juhász, and A. Pluzsik. 2017. “Effect of mixed fibers on the ductility of concrete.” J. Mater. Civ. Eng. 29 (9): 04017082. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001927.
Tóth, M., and A. Pluzsik. 2018. “Semi-discrete analytical beam model for fibre reinforced concrete beams.” In Proc., 12th Int. Ph.D. Symp. in Civil Engineering Czech Technical University in Prague, edited by A. Kohoutková, et al., 379–386. Lausanne, Switzerland: International Federation for Structural Concrete.
Tóth, M., A. Pluzsik, T. Pluzsik, and B. Morlin. 2018. “Experimental investigations of pull-out behaviour of synthetic fibres.” Archit. Civ. Eng. Environ. 11 (2): 89–95. https://doi.org/10.21307/ACEE-2018-026.
Vandewalle, L., et al. 2002a. “RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: Design of steel fibre reinforced concrete using the -w method: principles and applications.” Mater. Struct. 35 (249): 262–278. https://doi.org/10.1007/BF02482132.
Vandewalle, L., et al. 2002b. “RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: Bending test—Final recommendation.” Mater. Struct. 35 (253): 579–582. https://doi.org/10.1617/13884.
Vandewalle, L., et al. 2003. “RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: -ε-design method—Final recommendation.” Mater. Struct. 36 (262): 560–567. https://doi.org/10.1617/14007.
Voo, J. Y. L., and S. J. Foster. 2003. Variable engagement model for fibre reinforced concrete in tension. Sydney, Australia: School of Civil and Environmental Engineering, Univ. of New South Wales.
Zhan, Y., and G. Meschke. 2014. “Analytical model for the pullout behavior of straight and hooked-end steel fibers.” J. Eng. Mech. 140 (12): 04014091. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000800.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 30, 2019
Accepted: Dec 9, 2019
Published online: Apr 18, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.