Technical Papers
Apr 20, 2020

Wet–Dry Performance of Fat Clay Treated with Sludge Ash of Wood and Paper

Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 7

Abstract

This study aims to evaluate the durability and long-term performance of clayey soil treated with sludge ash of a wood and paper (SAWP) mill in response to wetting and drying (w-d) cycles to elucidate its efficiency as a sustainable construction material in earthwork applications. For this purpose, height change measurements, P-wave velocity (Vp), and unconfined compressive strength (UCS) tests were carried out at different w-d cycles. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were conducted to identify the mineralogical and microstructural changes in treated samples. The height change and Vp of the SAWP-treated samples were measured at each cycle and continued for 12 w-d cycles, or until the cycles ended were possible. The UCS tests were carried out after 0, 1, 3, 5, 7, and 12 w-d cycles. The height change ratio increased with the increased w-d cycles. Experimental results revealed that the Vp and UCS results generally decreased by increasing the number of w-d cycles. Crack propagation caused by desiccation kinetics and degradation of the cemented structure led to the formation of a weak plane and a significant reduction in Vp and UCS. Unique relationships were developed between Vp, UCS, and the number of w-d cycles for different SAWP contents and curing periods. These relationships can be considered as estimating the UCS based on Vp values with good accuracy to achieve sustainable design requirements. The XRD analyses demonstrated that calcite (CaCO3) was the main cementitious compound which is a key factor for the strength enhancement.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

All data generated or used during the study appear in the published article.

Acknowledgments

The research presented in this paper was financially supported by the Babol Noshirvani University of Technology through Grant Programs BNUT/370723/98 and BNUT/935140012/95.

References

Ahmed, A. 2015. “Compressive strength and microstructure of soft clay soil stabilized with recycled bassanite.” Appl. Clay Sci. 104 (Feb): 27–35. https://doi.org/10.1016/j.clay.2014.11.031.
Aldaood, A., M. Bouasker, and M. Al-Mukhtar. 2014. “Impact of wetting–drying cycles on the microstructure and mechanical properties of lime-stabilized gypseous soils.” Eng. Geol. 174 (May): 11–21. https://doi.org/10.1016/j.enggeo.2014.03.002.
ASTM. 2008. Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. ASTM D2845. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort. ASTM D698. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test methods for wetting and drying compacted soil-cement mixtures. ASTM D559. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166. West Conshohocken, PA: ASTM.
Basha, E. A., R. Hashim, H. B. Mahmud, and A. S. Muntohar. 2005. “Stabilization of residual soil with rice husk ash and cement.” Constr. Build. Mater. 19 (6): 448–453. https://doi.org/10.1016/j.conbuildmat.2004.08.001.
Chen, L., and D. F. Lin. 2009. “Stabilization treatment of soft subgrade soil by sewage sludge ash and cement.” J. Hazard. Mater. 162 (1): 321–327. https://doi.org/10.1016/j.jhazmat.2008.05.060.
Chen, P., B. Feng, Y. Lin, and C. Lin. 2019. “Solidification and stabilization of sewage sludge and MSWI bottom ash for beneficial use as construction materials.” J. Mater. Civ. Eng. 31 (1): 04018351. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002572.
Chittoori, B. C., A. J. Puppala, and A. Pedarla. 2018. “Addressing clay mineralogy effects on performance of chemically stabilized expansive soils subjected to seasonal wetting and drying.” J. Geotech. Geoenviron. Eng. 144 (1): 04017097. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001796.
Choi, W. H., S. R. Lee, and J. Y. Park. 2009. “Cement based solidification/stabilization of arsenic-contaminated mine tailings.” Waste Manage. 29 (5): 1766–1771. https://doi.org/10.1016/j.wasman.2008.11.008.
Consoli, N. C., K. da Silva, and A. B. Rivoire. 2017. “Compacted clay-industrial wastes blends: Long term performance under extreme freeze-thaw and wet-dry conditions.” Appl. Clay Sci. 146 (Sep): 404–410. https://doi.org/10.1016/j.clay.2017.06.032.
Consoli, N. C., R. A. Quiñónez Samaniego, L. E. González, E. J. Bittar, and O. Cuisinier. 2018. “Impact of severe climate conditions on loss of mass, strength, and stiffness of compacted fine-grained soils–portland cement blends.” J. Mater. Civ. Eng. 30 (8): 04018174. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002392.
Dempsey, B. J., and M. R. Thompson. 1967. Durability properties of lime-soil mixtures, 61–75. Washington, DC: Highway Research Board.
Doudart de la Grée, G. C. H., Q. L. Yu, and H. J. H. Brouwers. 2018. “Upgrading and evaluation of waste paper sludge ash in eco-lightweight cement composites.” J. Mater. Civ. Eng. 30 (3): 04018021. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002186.
Edil, T. B., H. A. Acosta, and C. H. Benson. 2006. “Stabilizing soft fine-grained soils with fly ash.” J. Mater. Civ. Eng. 18 (2): 283–294. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:2(283).
Elert, K., F. Nieto, and J. M. Azañón. 2017. “Effects of lime treatments on marls.” Appl. Clay Sci. 135 (Jan): 611–619. https://doi.org/10.1016/j.clay.2016.10.047.
Fava, G., M. L. Ruello, and V. Corinaldesi. 2011. “Paper mill sludge ash as supplementary cementitious material.” J. Mater. Civ. Eng. 23 (6): 772–776. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000218.
Frías, M., M. I. Sánchez de Rojas, O. Rodríguez, R. G. Jiménez, and R. V. de la Villa. 2008. “Characterisation of calcined paper sludge as an environmentally friendly source of metakaolin for manufacture of cementitious materials.” Adv. Cem. Res. 20 (1): 23–30. https://doi.org/10.1680/adcr.2008.20.1.23.
García Giménez, R., R. Vigil de la Villa, S. Goñi, and M. Frías. 2015. “Fly ash and paper sludge on the evolution of ternary blended cements: Mineralogy and hydrated phases.” J. Mater. Civ. Eng. 27 (9): 04014249. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001223.
Horpibulsuk, S., C. Phetchuay, A. Chinkulkijniwat, and A. Cholaphatsorn. 2013. “Strength development in silty clay stabilized with calcium carbide residue and fly ash.” Soils Found. 53 (4): 477–486. https://doi.org/10.1016/j.sandf.2013.06.001.
Horpibulsuk, S., C. Suksiripattanapong, W. Samingthong, R. Rachan, and A. Arulrajah. 2016. “Durability against wetting–drying cycles of water treatment sludge–fly ash geopolymer and water treatment sludge–cement and silty clay–cement systems.” J. Mater. Civ. Eng. 28 (1): 04015078. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001351.
Hossain, K. M. A., and L. Mol. 2011. “Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes.” Constr. Build. Mater. 25 (8): 3495–3501. https://doi.org/10.1016/j.conbuildmat.2011.03.042.
Hoy, M., R. Rachan, S. Horpibulsuk, A. Arulrajah, and M. Mirzababaei. 2017. “Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement–fly ash geopolymer.” Constr. Build. Mater. 144 (Jul): 624–634. https://doi.org/10.1016/j.conbuildmat.2017.03.243.
Jha, A. K., and P. V. Sivapullaiah. 2015. “Susceptibility of strength development by lime in gypsiferous soil—A micro mechanistic study.” Appl. Clay Sci. 115 (Oct): 39–50. https://doi.org/10.1016/j.clay.2015.07.017.
Kamei, T., A. Ahmed, and K. Ugai. 2013. “Durability of soft clay soil stabilized with recycled Bassanite and furnace cement mixtures.” Soils Found. 53 (1): 155–165. https://doi.org/10.1016/j.sandf.2012.12.011.
Kamon, M., and S. Nontananandh. 1991. “Combining industrial wastes with lime for soil stabilization.” J. Geotech. Eng. 117 (1): 1–17. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(1).
Kampala, A., S. Horpibulsuk, N. Prongmanee, and A. Chinkulkijniwat. 2014. “Influence of wet-dry cycles on compressive strength of calcium carbide residue–fly ash stabilized clay.” J. Mater. Civ. Eng. 26 (4): 633–643. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000853.
Keramatikerman, M., A. Chegenizadeh, and H. Nikraz. 2016. “Effect of GGBFS and lime binders on the engineering properties of clay.” Appl. Clay Sci. 132 (Nov): 722–730. https://doi.org/10.1016/j.clay.2016.08.029.
Khalid, N., M. Mukri, F. Kamarudin, and M. F. Arshad. 2012. “Clay soil stabilized using waste paper sludge ash (WPSA) mixtures.” Electron. J. Geotech. Eng. 17: 1215–1225.
Khattab, S. A., M. Al-Mukhtar, and J. M. Fleureau. 2007. “Long-term stability characteristics of a lime-treated plastic soil.” J. Mater. Civ. Eng. 19 (4): 358–366. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(358).
Latifi, N., C. L. Meehan, M. Z. A. Majid, and S. Horpibulsuk. 2016. “Strengthening montmorillonitic and kaolinitic clays using a calcium-based non-traditional additive: A micro-level study.” Appl. Clay Sci. 132 (Nov): 182–193. https://doi.org/10.1016/j.clay.2016.06.004.
Lisbona, A., I. Vegas, J. Ainchil, and C. Ríos. 2012. “Soil stabilization with calcined paper sludge: Laboratory and field tests.” J. Mater. Civ. Eng. 24 (6): 666–673. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000437.
Lynd, L. R., K. Lyford, C. R. South, G. van Walsum, and K. Levenson. 2001. “Evaluation of paper sludges for amenability to enzymatic hydrolysis and conversion to ethanol.” Tappi J. 84 (2): 50.
Miller, G. A., and S. Azad. 2000. “Influence of soil type on stabilization with cement kiln dust.” Constr. Build. Mater. 14 (2): 89–97. https://doi.org/10.1016/S0950-0618(00)00007-6.
Neramitkornburi, A., S. Horpibulsuk, S. L. Shen, A. Chinkulkijniwat, A. Arulrajah, and M. M. Disfani. 2015. “Durability against wetting–drying cycles of sustainable Lightweight Cellular Cemented construction material comprising clay and fly ash wastes.” Constr. Build. Mater. 77 (Feb): 41–49. https://doi.org/10.1016/j.conbuildmat.2014.12.025.
Olgun, M. 2013. “Effects of polypropylene fiber inclusion on the strength and volume change characteristics of cement-fly ash stabilized clay soil.” Geosynthetics Int. 20 (4): 263–275. https://doi.org/10.1680/gein.13.00016.
Parsons, R. L., and J. P. Milburn. 2003. “Engineering behavior of stabilized soils.” Transp. Res. Rec. 1837 (1): 20–29. https://doi.org/10.3141/1837-03.
PUNDIT Lab. n.d. “PUNDIT-Portable ultrasonic nondestructive digital indicating tester- lab.” Accessed August 13, 2019. http://germann.org/products-by-application/ultrasonic-pulse-velocity/pundit.
Rahmat, M. N., and N. Ismail. 2011. “Sustainable stabilization of the lower oxford clay by non-traditional binder.” Appl. Clay Sci. 52 (3): 199–208. https://doi.org/10.1016/j.clay.2011.02.011.
Rajasekaran, G. 2005. “Sulphate attack and ettringite formation in the lime and cement stabilized marine clays.” Ocean Eng. 32 (8–9): 1133–1159. https://doi.org/10.1016/j.oceaneng.2004.08.012.
Sharma, L. K., N. N. Sirdesai, K. M. Sharma, and T. N. Singh. 2018. “Experimental study to examine the independent roles of lime and cement on the stabilization of a mountain soil: A comparative study.” Appl. Clay Sci. 152 (Feb): 183–195. https://doi.org/10.1016/j.clay.2017.11.012.
Shirvani, R. A., and R. Noorzad. 2019. “Effectiveness of sludge ash of wood and paper mill as nontraditional additive for clayey soil treatment.” J. Mater. Civ. Eng. 31 (10): 04019230. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002877.
Solanki, P., and M. Zaman. 2014. “Effect of wet-dry cycling on the mechanical properties of stabilized subgrade soils.” In Geo-Congress, Geotechnical Special Publication 234, 3625–3634. Reston, VA: ASCE. https://doi.org/10.1061/9780784413272.351.
Tao, M., and Z. Zhang. 2005. “Enhanced performance of stabilized by-product gypsum.” J. Mater. Civ. Eng. 17 (6): 617–623. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:6(617).
Yoobanpot, N., P. Jamsawang, and S. Horpibulsuk. 2017. “Strength behavior and microstructural characteristics of soft clay stabilized with cement kiln dust and fly ash residue.” Appl. Clay Sci. 141 (Jun): 146–156. https://doi.org/10.1016/j.clay.2017.02.028.
Zhang, T., G. Cai, and S. Liu. 2018. “Application of lignin-stabilized silty soil in highway subgrade: A macroscale laboratory study.” J. Mater. Civ. Eng. 30 (4): 04018034. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002203.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 32Issue 7July 2020

History

Received: Apr 28, 2019
Accepted: Nov 25, 2019
Published online: Apr 20, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 20, 2020

Permissions

Request permissions for this article.

Authors

Affiliations

Reza Alijani Shirvani [email protected]
Ph.D. Candidate, Faculty of Civil Engineering, Babol Noshirvani Univ. of Technology, P.O. Box 484, Babol 4714871167, Iran. Email: [email protected]
Reza Noorzad [email protected]
Associate Professor, Faculty of Civil Engineering, Babol Noshirvani Univ. of Technology, P.O. Box 484, Babol 4714871167, Iran (corresponding author). Email: [email protected]; [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share