Mesoscale Model for FRP-Confined Concrete
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 6
Abstract
The paper attempts to understand the macroresponse of fiber-reinforced polymer (FRP) confined concrete in terms of mesolevel interactions. Cylindrical specimens are modeled using a three-dimensional (3D) discrete-element formulation that uses polyhedrons of required geometry to closely approximate the actual shape and size of coarse aggregates. A coupled discrete-continuum approach is adopted to account for damage at length scales smaller than the smallest particle modeled. Constitutive models that capture aspects of mesobehavior crucial to confined concrete are developed, and mesoscale features affecting interface cracking, slip, and mortar damage are investigated. Increased confinement is seen to lead to some reduction in Mode I cracking and a marginal increase in Mode II cracking at the interfaces. However, the principal mechanism for strength gain is seen to be the prevention of localization and dispersal of slip. Increase in confining stiffness also results in increased mortar damage, which limits strength gain due to confinement, as well as a remarkable reversal of the platen effect.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American concrete Institute). 2008. Guide for the design and construction of concrete reinforced with FRP bars. ACI 440.1R-06. Detroit: ACI.
Behbahani, A. E., J. A. Barros, and A. Ventura-Gouveia. 2015. “Plastic-damage smeared crack model to simulate the behaviour of structures made by cement based materials.” Int. J. Solids Struct. 73 (Nov): 20–40. https://doi.org/10.1016/j.ijsolstr.2015.07.027.
Bolton, M. D. 1986. “The strength and dilatancy of sands.” Géotechnique 36 (1): 65–78. https://doi.org/10.1680/geot.1986.36.1.65.
Caliskan, S., B. L. Karihaloo, and B. I. G. Barr. 2002. “Study of rock–mortar interfaces. Part II: Strength of interface.” Mag. Concr. Res. 54 (6): 463–472. https://doi.org/10.1680/macr.2002.54.6.463.
Calixto, J. M. F. 2002. “Microcracking of high performance concrete subjected to biaxial tension-compression stresses.” Mater. Res. 5 (3): 295–299. https://doi.org/10.1590/S1516-14392002000300013.
Ceccato, C., M. Salviato, C. Pellegrino, and G. Cusatis. 2017. “Simulation of concrete failure and fiber reinforced polymer fracture in confined columns with different cross sectional shape.” Int. J. Solids Struct. 108 (Mar): 216–229. https://doi.org/10.1016/j.ijsolstr.2016.12.017.
Cusatis, G., D. Pelessone, and A. Mencarelli. 2011. “Lattice discrete particle model (LDPM) for failure behavior of concrete. I: Theory.” Cem. Concr. Compos. 33 (9): 881–890. https://doi.org/10.1016/j.cemconcomp.2011.02.011.
Dandapat, R., S. Ghosh, and A. Deb. 2018. “A discrete element implementation for concrete: Particle generation, contact calculations, packing under gravity and modeling material response.” Granular Matter 20 (2): 30. https://doi.org/10.1007/s10035-018-0803-4.
Fenwick, R. C., and T. Pauley. 1968. “Mechanism of shear resistance of concrete beams.” J. Struct. Div. 94 (10): 2325–2350.
Hentz, S., L. Daudeville, and F. V. Donzé. 2004. “Identification and validation of a discrete element model for concrete.” J. Eng. Mech. 130 (6): 709–719. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(709).
IS (Indian Standard). 1970. Specification for coarse and fine aggregates from natural sources for concrete. IS 383. New Delhi: IS.
Itasca Consulting Group. 1999. PFC 3D-user manual. Minneapolis: Itasca Consulting Group.
Jiang, J. F., and Y. F. Wu. 2012. “Identification of material parameters for Drucker–Prager plasticity model for FRP confined circular concrete columns.” Int. J. Solids Struct. 49 (3–4): 445–456. https://doi.org/10.1016/j.ijsolstr.2011.10.002.
Kumar, C. N. S., and T. D. Rao. 2010. “Fracture parameters of high strength concrete Mode II testing.” Mag. Concr. Res. 62 (3): 157–162. https://doi.org/10.1680/macr.2010.62.3.157.
Lam, L., and J. G. Teng. 2003. “Design-oriented stress–strain model for FRP-confined concrete.” Constr. Build. Mater. 17 (6–7): 471–489. https://doi.org/10.1016/S0950-0618(03)00045-X.
Lubarda, V. A., and D. Krajcinovic. 1993. “Damage tensors and the crack density distribution.” Int. J. Solids Struct. 30 (20): 2859–2877. https://doi.org/10.1016/0020-7683(93)90158-4.
Luding, S. 2008. “Introduction to discrete element methods: Basic of contact force models and how to perform the micro-macro transition to continuum theory.” Eur. J. Environ. Civ. Eng. 12 (7–8): 785–826. https://doi.org/10.1080/19648189.2008.9693050.
Mirmiran, A., and M. Shahawy. 1997. “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng. 123 (5): 583–590. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(583).
Nemati, K. M., P. J. Monteiro, and K. L. Scrivener. 1998. “Analysis of compressive stress-induced cracks in concrete.” ACI Mater. J. 95 (Sep): 617–630.
Neville, A. M. 1995. Vol. 4 of Properties of concrete. London: Longman.
Rao, G. A., and B. K. R. Prasad. 2011. “Influence of interface properties on fracture behavior of concrete.” Sadhana 36 (2): 193–208. https://doi.org/10.1007/s12046-011-0012-x.
Reinhardt, H. W., H. A. Cornelissen, and D. A. Hordijk. 1986. “Tensile tests and failure analysis of concrete.” J. Struct. Eng. 112 (11): 2462–2477. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:11(2462).
Reinhardt, H. W., and S. Xu. 2000. “A practical testing approach to determine Mode II fracture energy GIIF for concrete.” Int. J. Fract. 105 (2): 107–125. https://doi.org/10.1023/A:1007649004465.
Sadeghian, P., and A. Fam. 2014. “A rational approach toward strain efficiency factor of fiber-reinforced polymer-wrapped concrete columns.” ACI Struct. J. 111 (1): 135–144. https://doi.org/10.14359/51686437.
Samaan, M., A. Mirmiran, and M. Shahawy. 1998. “Model of concrete confined by fiber composites.” J. Struct. Eng. 124 (9): 1025–1031. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025).
Seffo, M., and M. Hamcho. 2012. “Strength of concrete cylinder confined by composite materials (CFRP).” Energy Procedia 19 (Jan): 276–285. https://doi.org/10.1016/j.egypro.2012.05.207.
Simo, J. C., and T. J. Hughes. 2006. Vol. 7 of Computational inelasticity. New York: Springer.
Tran, V. T., F. V. Donzé, and P. Marin. 2011. “A discrete element model of concrete under high triaxial loading.” Cem. Concr. Compos. 33 (9): 936–948. https://doi.org/10.1016/j.cemconcomp.2011.01.003.
Van Mier, J. G. M., et al. 1997. “Strain-softening of concrete in uniaxial compression.” Mater. Struct. 30 (4): 195–209. https://doi.org/10.1007/BF02486177.
Vonk, R. A. 1993. A micromechanical investigation of softening of concrete loaded in compression. Eindhoven, Netherlands: Eindhoven Univ. of Technology.
Walraven, J. C., and H. W. Reinhardt. 1981. “Theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subjected to shear loading.” Heron 26 (1).
Xiao, Y., and H. Wu. 2000. “Compressive behavior of concrete confined by carbon fiber composite jackets.” J. Mater. Civ. Eng. 12 (2): 139–146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139).
Youssef, M. N., M. Q. Feng, and A. S. Mosallam. 2007. “Stress–strain model for concrete confined by FRP composites.” Compos. Part B 38 (5–6): 614–628. https://doi.org/10.1016/j.compositesb.2006.07.020.
Yu, T. T. J. G., J. G. Teng, Y. L. Wong, and S. L. Dong. 2010. “Finite element modeling of confined concrete-I: Drucker–Prager type plasticity model.” Eng. Struct. 32 (3): 665–679. https://doi.org/10.1016/j.engstruct.2009.11.014.
Zabulionis, D., R. Kačianauskas, D. Markauskas, and J. Rojek. 2012. “An investigation of nonlinear tangential contact behaviour of a spherical particle under varying loading.” Bull. Pol. Acad. Sci. Tech. 60 (2): 265–278. https://doi.org/10.2478/v10175-012-0036-3.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 23, 2019
Accepted: Oct 16, 2019
Published online: Mar 23, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 23, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.