Activation of Binary Binder Containing Fly Ash and Portland Cement Using Red Mud as Alkali Source and Its Application in Controlled Low-Strength Materials
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 2
Abstract
The feasibility of using red mud as an alkali source in alkali-activated fly ash and Portland cement (PC) based binary binder for controlled low-strength material (CLSM) is investigated. The alkalis in red mud are NaOH and . The inclusion of red mud increases the pH value of pore solutions in the mixtures by direct dissolution of NaOH and reaction of with portlandite formed in PC hydration. The mixture with increased pH value accelerates the hydration of fly ash and PC based binary binder, contributing to the strength development of CLSM. The red mud also acts as a micro-filler that refines the pore structure and thus reduces the concentration of harmful pores (). The engineering performance is enhanced with inclusion of red mud, which is mainly attributed to the accelerated hydration of the binary binder and the refined pore structure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research has been financially supported by the National Natural Science Foundation of China (Grant No. 51672199), Fundamental Research Funds for the Central Universities (Grant No. WUT: 2017-YB-008), National Key Research and Development Program of China (Grant Nos. 2016YFB0303501 and BY115J004), and 111 Project (No. B18038).
References
ACI (American Concrete Institute). 2013. Report on controlled low-strength materials. ACI Committee 229. Farmington Hills, MI: ACI.
Atasoy, A. 2005. “An investigation on characterization and thermal analysis of the Aughinish red mud.” J. Therm. Anal. Calorim. 81 (2): 357–361. https://doi.org/10.1007/s10973-005-0792-5.
Bernal, S. A., R. San Nicolas, J. L. Provis, R. M. de Gutierrez, and J. S. J. van Deventer. 2014. “Natural carbonation of aged alkali-activated slag concretes.” Mater. Struct. 47 (4): 693–707. https://doi.org/10.1617/s11527-013-0089-2.
Brouwers, H. J. H., and H. J. Radix. 2005. “Self-compacting concrete: Theoretical and experimental study.” Cem. Concr. Res. 35 (11): 2116–2136. https://doi.org/10.1016/j.cemconres.2005.06.002.
Chinese Standard. 1999. Method of testing cements (text of document is in Chinese). GB/T 17671. Beijing: Standards Press of China.
Chinese Standard. 2007. Common portland cement (text of document is in Chinese). GB 175. Beijing: Standards Press of China.
Chinese Standard. 2008a. Code for application technique of cementitious grout (text of document is in Chinese). GB/T 50448. Beijing: Standards Press of China.
Chinese Standard. 2008b. Standard for pollution control on the landfill site of municipal solid waste (text of document is in Chinese). GB 16889. Beijing: Standards Press of China.
Choo, H., S. Lim, W. Lee, and C. Lee. 2016. “Compressive strength of one-part alkali activated fly ash using red mud as alkali supplier.” Constr. Build. Mater. 125 (Oct): 21–28. https://doi.org/10.1016/j.conbuildmat.2016.08.015.
Cyr, M., P. Rivard, F. Labrecque, and A. Daidié. 2008. “High-pressure device for fluid extraction from porous materials: Application to cement-based materials.” J. Am. Ceram. Soc. 91 (8): 2653–2658. https://doi.org/10.1111/j.1551-2916.2008.02525.x.
Do, T. M., and Y. Kim. 2016. “Engineering properties of controlled low strength material (CLSM) incorporating red mud.” Int. J. Geo-Eng. 7 (1): 1–17. https://doi.org/10.1186/s40703-016-0022-y.
El-wafa, M. A., and K. Fukuzawa. 2018. “Early-age strength of alkali-activated municipal slag—Fly ash—Based geopolymer mortar.” J. Mater. Civ. Eng. 30 (4): 1–9. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002234.
Fan, Y. F., and H. Y. Luan. 2013. “Pore structure in concrete exposed to acid deposit.” Constr. Build. Mater. 49 (Dec): 407–416. https://doi.org/10.1016/j.conbuildmat.2013.08.075.
Fechtelkord, M., B. Posnatzki, and J. C. Buhl. 2001. “Characterization of basic cancrinite synthesized in a butanediol-water system.” Chem. Mater. 13 (6): 1967–1975. https://doi.org/10.1021/cm001136z.
García-Lodeiro, I., A. Fernández-Jiménez, and A. Palomo. 2013. “Variation in hybrid cements over time. Alkaline activation of fly ash-portland cement blends.” Cem. Concr. Res. 52 (Oct): 112–122. https://doi.org/10.1016/j.cemconres.2013.03.022.
Guo, X., H. Shi, and W. A. Dick. 2010. “Compressive strength and microstructural characteristics of class C fly ash geopolymer.” Cem. Concr. Compos. 32 (2): 142–147. https://doi.org/10.1016/j.cemconcomp.2009.11.003.
Jin, F., K. Gu, and A. Al-Tabbaa. 2014. “Strength and drying shrinkage of slag paste activated by sodium carbonate and reactive MgO.” Constr. Build. Mater. 81 (Apr): 58–65. https://doi.org/10.1016/j.conbuildmat.2015.01.082.
Katz, A., and K. Kovler. 2004. “Utilization of industrial by-products for the production of controlled low strength materials (CLSM).” Waste Manage. (Oxford) 24 (5): 501–512. https://doi.org/10.1016/S0956-053X(03)00134-X.
Kaya, K., and S. Soyer-Uzun. 2016. “Evolution of structural characteristics and compressive strength in red mud-metakaolin based geopolymer systems.” Ceram. Int. 42 (6): 7406–7413. https://doi.org/10.1016/j.ceramint.2016.01.144.
Ke, X., S. A. Bernal, and J. L. Provis. 2016. “Controlling the reaction kinetics of sodium carbonate-activated slag cements using calcined layered double hydroxides.” Cem. Concr. Res. 81 (Mar): 24–37. https://doi.org/10.1016/j.cemconres.2015.11.012.
Ke, X., S. A. Bernal, N. Ye, J. L. Provis, and J. Yang. 2015. “One-part geopolymers based on thermally treated red Mud/NaOH blends.” J. Am. Ceram. Soc. 98 (1): 5–11. https://doi.org/10.1111/jace.13231.
Kim, Y. S., T. M. Do, M. J. Kim, B. J. Kim, and H. K. Kim. 2018. “Utilization of by-product in controlled low-strength material for geothermal systems: Engineering performances, environmental impact, and cost analysis.” J. Cleaner Prod. 172 (Jan): 909–920. https://doi.org/10.1016/j.jclepro.2017.10.260.
Kumar, A., and S. Kumar. 2013. “Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization.” Constr. Build. Mater. 38 (2): 865–871. https://doi.org/10.1016/j.conbuildmat.2012.09.013.
Kumar, R., and B. Bhattacharjee. 2003. “Study on some factors affecting the results in the use of MIP method in concrete research.” Cem. Concr. Res. 33 (3): 417–424. https://doi.org/10.1016/S0008-8846(02)00974-2.
Langan, B. W., K. Weng, and M. A. Ward. 2002. “Effect of silica fume and fly ash on heat of hydration of Portland cement.” Cem. Concr. Res. 32 (7): 1045–1051. https://doi.org/10.1016/S0008-8846(02)00742-1.
Ling, T. C., S. K. Kaliyavaradhan, and C. S. Poon. 2018. “Global perspective on application of controlled low-strength material (CLSM) for trench backfilling—An overview.” Constr. Build. Mater. 158 (Jan): 535–548. https://doi.org/10.1016/j.conbuildmat.2017.10.050.
Liu, R., and C. S. Poon. 2016. “Effects of red mud on properties of self-compacting mortar.” J. Cleaner Prod. 135 (Nov): 1170–1178. https://doi.org/10.1016/j.jclepro.2016.07.052.
Liu, W., X. Chen, W. Li, Y. Yu, and K. Yan. 2014. “Environmental assessment, management and utilization of red mud in China.” J. Cleaner Prod. 84 (1): 606–610. https://doi.org/10.1016/j.jclepro.2014.06.080.
Luukkonen, T., Z. Abdollahnejad, J. Yliniemi, P. Kinnunen, and M. Illikainen. 2018. “One-part alkali-activated materials: A review.” Cem. Concr. Res. 103 (Jan): 21–34. https://doi.org/10.1016/j.cemconres.2017.10.001.
Magniont, C., G. Escadeillas, C. Oms-Multon, and P. De Caro. 2010. “The benefits of incorporating glycerol carbonate into an innovative pozzolanic matrix.” Cem. Concr. Res. 40 (7): 1072–1080. https://doi.org/10.1016/j.cemconres.2010.03.009.
Megat Johari, M. A., J. J. Brooks, S. Kabir, and P. Rivard. 2011. “Influence of supplementary cementitious materials on engineering properties of high strength concrete.” Constr. Build. Mater. 25 (5): 2639–2648. https://doi.org/10.1016/j.conbuildmat.2010.12.013.
Miren, E., A. Javier, M. Pérez, and G. Alain. 2013. “Use of recycled fine aggregates for Control Low Strength Materials (CLSMs) production.” Constr. Build. Mater. 44 (Jul): 142–148. https://doi.org/10.1016/j.conbuildmat.2013.02.059.
Pacheco-Torgal, F., J. Castro-Gomes, and S. Jalali. 2008. “Alkali-activated binders: A review. Part 1. Historical background, terminology, reaction mechanisms and hydration products.” Constr. Build. Mater. 22 (7): 1305–1314. https://doi.org/10.1016/j.conbuildmat.2007.10.015.
Paglia, C. 2001. “The influence of alkali-free and alkaline shotcrete accelerators within cement systems I. Characterization of the setting behavior.” Cem. Concr. Res. 31 (6): 913–918. https://doi.org/10.1016/S0008-8846(01)00509-9.
Pan, Z., D. Li, J. Yu, and N. Yang. 2003. “Properties and microstructure of the hardened alkali-activated red mud-slag cementitious material.” Cem. Concr. Res. 33 (9): 1437–1441. https://doi.org/10.1016/S0008-8846(03)00093-0.
Passaglia, E., and R. Rinaldi. 1984. “Katoite, a new member of the series and a new nomenclature for the hydrogrossular group of the minerals.” Bull. Miner. 107 (5): 605–618. https://doi.org/10.3406/bulmi.1984.7804.
Pera, J., R. Boumaza, and J. Ambroise. 1997. “Development of a pozzolanic pigment from red mud.” Cem. Concr. Res. 27 (10): 1513–1522. https://doi.org/10.1016/S0008-8846(97)00162-2.
Pöllmann, H. 2006. “Syntheses, properties and solid solution of ternary lamellar calcium aluminate hydroxi salts (AFm-phases) containing , and .” Neues Jahrb. für Mineral. Abh. 182 (2): 173–181. https://doi.org/10.1127/0077-7757/2006/0042.
Poon, C. S., S. C. Kou, and L. Lam. 2006. “Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete.” Constr. Build. Mater. 20 (10): 858–865. https://doi.org/10.1016/j.conbuildmat.2005.07.001.
Provis, J. L., A. Palomo, and C. Shi. 2015. “Advances in understanding alkali-activated materials.” Cem. Concr. Res. 78 (Part A): 110–125. https://doi.org/10.1016/j.cemconres.2015.04.013.
Qian, J., C. Shi, and Z. Wang. 2001. “Activation of blended cements containing fly ash.” Cem. Concr. Res. 31 (8): 1121–1127. https://doi.org/10.1016/S0008-8846(01)00526-9.
Rai, S., K. L. Wasewar, J. Mukhopadhyay, C. K. Yoo, and H. Uslu. 2012. “Neutralization and utilization of red mud for its better waste management.” Arch. Environ. Sci. 6: 13–33. https://doi.org/10.1017/CBO9781107415324.004.
Rajamma, R., R. J. Ball, L. A. C. Tarelho, G. C. Allen, J. A. Labrincha, and V. M. Ferreira. 2009. “Characterisation and use of biomass fly ash in cement-based materials.” J. Hazard. Mater. 172 (2–3): 1049–1060. https://doi.org/10.1016/j.jhazmat.2009.07.109.
Romano, R. C. O., H. M. Bernardo, M. H. Maciel, R. G. Pileggi, and M. A. Cincotto. 2018. “Hydration of Portland cement with red mud as mineral addition.” J. Therm. Anal. Calorim. 131 (3): 2477–2490. https://doi.org/10.1007/s10973-017-6794-2.
Rübner, K., and D. Hoffmann. 2006. “Characterization of mineral building materials by mercury-intrusion porosimetry.” Part. Part. Syst. Char. 23 (1): 20–28. https://doi.org/10.1002/ppsc.200601008.
Samal, S., A. K. Ray, and A. Bandopadhyay. 2012. “Proposal for resources, utilization and processes of red mud in India—A review.” Int. J. Miner. Process. 118 (Jan): 43–55. https://doi.org/10.1016/j.minpro.2012.11.001.
Serpell, R., J. Henschen, J. Roesler, and D. Lange. 2015. “Relative proportioning method for controlled low-strength material.” ACI Mater. J. 112 (2): 179–188.
Shi, D., and D. N. Winslow. 1985. “Contact angle and damage during mercury intrusion into cement paste.” Cem. Concr. Res. 15 (4): 645–654. https://doi.org/10.1016/0008-8846(85)90064-X.
Takahashi, T., S. Goto, M. Yamamoto, and K. Ioku. 1997. “Relationship between compressive strength and pore structure of hardened cement pastes.” Adv. Cem. Res. 9 (33): 25–30. https://doi.org/10.1680/adcr.1997.9.33.25.
Tsakiridis, P. E., S. Agatzini-Leonardou, and P. Oustadakis. 2004. “Red mud addition in the raw meal for the production of Portland cement clinker.” J. Hazard. Mater. 116 (1–2): 103–110. https://doi.org/10.1016/j.jhazmat.2004.08.002.
Yatsenko, S. P., and I. N. Pyagai. 2010. “Red mud pulp carbonization with scandium extraction during alumina production.” Theor. Found. Chem. Eng. 44 (4): 563–568. https://doi.org/10.1134/S0040579510040366.
Zajac, M., A. Rossberg, G. Le Saout, and B. Lothenbach. 2014. “Influence of limestone and anhydrite on the hydration of Portland cements.” Cem. Concr. Compos. 46 (Feb): 99–108. https://doi.org/10.1016/j.cemconcomp.2013.11.007.
Zeng, Q., K. Li, T. Fen-Chong, and P. Dangla. 2012. “Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data.” Cem. Concr. Compos. 34 (9): 1053–1060. https://doi.org/10.1016/j.cemconcomp.2012.06.005.
Zhang, M., T. El-Korchi, G. Zhang, J. Liang, and M. Tao. 2014. “Synthesis factors affecting mechanical properties, microstructure, and chemical composition of red mud-fly ash based geopolymers.” Fuel 134 (Oct): 315–325. https://doi.org/10.1016/j.fuel.2014.05.058.
Zhang, N., H. Sun, X. Liu, and J. Zhang. 2009. “Early-age characteristics of red mud-coal gangue cementitious material.” J. Hazard. Mater. 167 (1–3): 927–932. https://doi.org/10.1016/j.jhazmat.2009.01.086.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Dec 29, 2018
Accepted: Jul 15, 2019
Published online: Dec 10, 2019
Published in print: Feb 1, 2020
Discussion open until: May 10, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.