Performance Comparison of Laboratory-Produced Short-Term Aged Mixtures with Plant-Produced Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 1
Abstract
Short-term oven aging (STOA) is used in current practice to simulate typical aging of asphalt mixtures during plant production and field construction. This study compares the volumetrics and performance of laboratory-produced asphalt mixtures and corresponding plant-produced mixtures to examine whether STOA simulates plant short-term aging. Eight plant-produced mixtures with varying levels of binder performance grade, binder content, filler content, and traffic design levels were tested for rutting and cracking resistance using Hamburg wheel-tracking (HWT) and semicircular bending (SCB) tests, respectively. The eight mixtures were duplicated in the laboratory and subjected to 2 h of reheating and 2 h of oven aging before testing. The eight lab-produced mixtures had comparable volumetric properties to the plant-produced mixtures, and the performance results showed a relatively high level of equality between plant- and lab-produced mixtures even when the properties of their extracted and recovered binders at high and intermediate temperatures are found to be significantly different. Based on the findings of this study, the use of the outlined STOA procedure is considered sufficient to represent standard plant production aging.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was funded by the Wisconsin Highway Research Program. Support of the project oversight committee is acknowledged. The results and opinions presented are those of the authors and do not necessarily reflect those of the sponsoring agency.
References
AASHTO. 2012. Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). AASHTO T313. Washington, DC: AASHTO.
AASHTO. 2013. Standard method of test for effect of heat and air on a moving film of asphalt binder (Rolling thin-film oven test). AASHTO T240. Washington, DC: AASHTO.
AASHTO. 2014a. Hamburg wheel-track testing of compacted hot mix asphalt (HMA). AASHTO T324. Washington, DC: AASHTO.
AASHTO. 2014b. Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR). AASHTO T350. Washington, DC: AASHTO.
AASHTO. 2014c. Standard method of test for quantitative extraction of asphalt binder from hot mix asphalt (HMA). AASHTO T164. Washington, DC: AASHTO.
AASHTO. 2015. Mixture conditioning of hot mix asphalt (HMA). AASHTO R30. Washington, DC: AASHTO.
AASHTO. 2016a. Standard method of test for bulk specific gravity (GMB) of compacted hot mix asphalt (HMA) using saturated surface-dry specimens. AASHTO T166. Washington, DC: AASHTO.
AASHTO. 2016b. Standard method of test for determining the fracture potential of asphalt mixtures using semicircular bend (SCB) geometry at intermediate temperature. AASHTO TP124. Washington, DC: AASHTO.
AASHTO. 2016c. Standard method of test for estimating fatigue resistance of asphalt binders using the linear amplitude sweep. AASHTO TP101. Washington, DC: AASHTO.
Abbas, A. R., M. Nazzal, S. Kaya, S. Akinbowale, B. Subedi, and L. A. Qtaish. 2015. “Effect of warm mix asphalt on aging of asphalt binders.” In Proc., TMS Middle East: Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), 55–64. Berlin: Springer.
ASTM. 2011a. Standard test method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method. ASTM D6857. West Conshohocken, PA: ASTM.
ASTM. 2011b. Standard test method for theoretical maximum specific gravity and density of bituminous paving mixtures. ASTM D2041. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard practice for recovery of asphalt from solution using the rotary evaporator. West Conshohocken, PA: ASTM.
Bahia, H., H. Sadek, M. Z. Rahaman, Z. Lemke, D. Swiertz, and S. Reichelt. 2018. Final report on Wisconsin highway research program project 0092-17-04: Field aging and moisture sensitivity. Madison: Univ. of Wisconsin.
Jung, S. H. 2006. “The effects of asphalt binder oxidation on hot mix asphalt concrete mixture rheology and fatigue performance.” Ph.D. dissertation, Dept. of Chemical Engineering, Texas A&M Univ.
NCHRP (National Cooperative Highway Research Program). 2011. Mix design practices for warm mix asphalt. Washington, DC: NCHRP.
NCHRP (National Cooperative Highway Research Program). 2014d. Evaluation of the moisture susceptibility of WMA technologies. Washington, DC: NCHRP.
NCHRP (National Cooperative Highway Research Program). 2014e. Field performance of warm mix asphalt technologies. Washington, DC: NCHRP.
NCHRP (National Cooperative Highway Research Program). 2015. Short-term laboratory conditioning of asphalt mixtures. Washington, DC: NCHRP.
Rahaman, M. Z. 2016. “Creep and recovery behavior of polymeric and chemically treated asphalt binders.” M.S. thesis, College of Engineering, Arkansas State Univ.
Rahaman, M. Z., Z. Hossain, and M. Zaman. 2017. “Nonrecoverable compliance and recovery behavior of polymer-modified and reclaimed asphalt pavement-modified binders in Arkansas.” J. Test. Eval. 46 (6): 2494–2495. https://doi.org/10.1520/JTE20170071.
Solaimanian, M., S. Milander, and X. Chen. 2018. “Moving towards performance based testing semi-circular bend test.” In Proc., Pennsylvania Asphalt Pavement Association 58th Annual Conf. Harrisburg, PA: Pennsylvania Asphalt Pavement Association.
Underwood, B. S., C. M. Baek, and Y. R. Kim. 2014. “Effect of asphalt binder oxidation on the modulus of asphalt concrete mixtures.” In Proc., 12th Int. Conf. on Asphalt Pavements, ISAP, 837–847. Raleigh, NC: Taylor and Francis.
Zaman, M., M. Z. Rahaman, and Z. Hossain. 2018. “Nonrecoverable compliance and recovery behavior of polymer-modified and reclaimed asphalt pavement (RAP): Modified binders in Arkansas.” J. Test. Eval. 46 (6): 2494. https://doi.org/10.1520/JTE20170071.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Feb 2, 2019
Accepted: Jun 19, 2019
Published online: Oct 18, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.