Enhancement of MICP-Treated Sandy Soils against Environmental Deterioration
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 12
Abstract
Microbially induced calcite precipitation (MICP) is a sustainable biological ground improvement technology that is capable of improving the engineering properties of soil. A laboratory study was conducted to investigate the influence of some key environmental parameters on the long-term engineering performance of MICP-treated sandy soil, including wet-dry cycles, freeze-thaw cycles, and acid rain conditions, and to study the effect of enhancement through fiber reinforcement and multiple MICP treatments. Experimental results indicated that durability of MICP-treated soil was weak in wet-dry cycles, freeze-thaw cycles, and acid rain conditions. The unconfined compression strength (UCS) of MICP-treated soil had nearly 80% reduction after one wet-dry cycle, 58% reduction after 15 freeze-thaw cycles, and 83% reduction after 15 days immersed in acid rain solution with the pH of 3.5. Fiber reinforcement mainly enhanced the ductility of MICP-treated samples. The failure strain of fiber-reinforced samples reached 1.6% compared with unreinforced samples of 0.4% after 5 wet-dry cycles. Multiple treatments enhanced the durability of MICP-treated samples. The UCS of multiple MICP-treated samples had no significant reduction after wet-dry and freeze-thaw cycles. For quadruple MICP-treated samples, a 51.9% UCS still remained after 15 days immersed in acid rain solution with the pH of 3.5.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Science Foundation Grant No. 1531382 and MarTREC. The fifth author thanks the Natural Science Foundation of China (No. 51668050) for its support.
References
Achal, V., A. Mukerjee, and M. S. Reddy. 2013. “Biogenic treatment improves the durability and remediates the cracks of concrete structures.” Constr. Build. Mater. 48 (Nov): 1–5. https://doi.org/10.1016/j.conbuildmat.2013.06.061.
Al Qabany, A., K. Soga, and C. Santamarina. 2011. “Factors affecting efficiency of microbially induced calcite precipitation.” J. Geotech. Geoenviron. Eng. 138 (8): 992–1001. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000666.
Amidi, S., and J. Wang. 2015. “Surface treatment of concrete bricks using calcium carbonate precipitation.” Constr. Build. Mater. 80: 273–278. https://doi.org/10.1016/j.conbuildmat.2015.02.001.
ASTM. 2013. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166/D2166M. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test methods for wetting and drying compacted soil-cement mixtures. ASTM D559. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test methods for freezing and thawing compacted soil-cement mixtures. ASTM D560. West Conshohocken, PA: ASTM.
Bang, S. C., S. H. Min, and S. S. Bang. 2011. “KGS Awards Lectures: Application of microbiologically induced soil stabilization technique for dust suppression.” Int. J. Geo-Eng. 3 (2): 27–37.
Bu, C., K. Wen, S. Liu, U. Ogbonnaya, Q. Dong, L. Li, and F. Amini. 2018a. “Development of a rigid full-contact mold for preparing biobeams through microbial-induced calcite precipitation.” Geotech. Test. J. 42 (3): 20170148. https://doi.org/10.1520/GTJ20170148.
Bu, C., K. Wen, S. Liu, U. Ogbonnaya, and L. Li. 2018b. “Development of bio-cemented constructional materials through microbial induced calcite precipitation.” Mater. Struct. 51 (1): 30 https://doi.org/10.1617/s11527-018-1157-4.
Cheng, L., and R. Cord-Ruwisch. 2012. “In situ soil cementation with ureolytic bacteria by surface percolation.” Ecol. Eng. 42 (May): 64–72. https://doi.org/10.1016/j.ecoleng.2012.01.013.
Cheng, L., R. Cord-Ruwisch, and M. A. Shahin. 2013. “Cementation of sand soil by microbially induced calcite precipitation at various degrees of saturation.” Can. Geotech. J. 50 (1): 81–90. https://doi.org/10.1139/cgj-2012-0023.
Cheng, L., M. A. Shahin, and D. Mujah. 2016. “Influence of key environmental conditions on microbially induced cementation for soil stabilization.” J. Geotech. Geoenviron. Eng. 143 (1): 04016083. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001586.
Chou, C. W., E. A. Seagren, A. H. Aydilek, and M. Lai. 2011. “Biocalcification of sand through ureolysis.” J. Geotech. Geoenviron. Eng. 137 (12): 1179–1189. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000532.
Ciantia, M. O., R. Castellanza, and C. Di Prisco. 2015. “Experimental study on the water-induced weakening of calcarenites.” Rock Mech. Rock Eng. 48 (2): 441–461. https://doi.org/10.1007/s00603-014-0603-z.
Consoli, N. C., M. A. Vendruscolo, A. Fonini, and F. Dalla Rosa. 2009. “Fiber reinforcement effects on sand considering a wide cementation range.” Geotext. Geomembr. 27 (3): 196–203. https://doi.org/10.1016/j.geotexmem.2008.11.005.
Cosentino, D., C. Chenu, and Y. Le Bissonnais. 2006. “Aggregate stability and microbial community dynamics under drying-wetting cycles in a silt loam soil.” Soil Biol. Biochem. 38 (8): 2053–2062. https://doi.org/10.1016/j.soilbio.2005.12.022.
DeJong, J. T., M. B. Fritzges, and K. Nüsslein. 2006. “Microbially induced cementation to control sand response to undrained shear.” J. Geotech. Geoenviron. Eng. 132 (11): 1381–1392. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:11(1381).
Eyssautier-Chuine, S., B. Marin, C. Thomachot-Schneider, G. Fronteau, A. Schneider, S. Gibeaux, and P. Vazquez. 2016. “Simulation of acid rain weathering effect on natural and artificial carbonate stones.” Environ. Earth Sci. 75 (9): 748. https://doi.org/10.1007/s12665-016-5555-z.
Jiang, N. J., H. Yoshioka, K. Yamamoto, and K. Soga. 2016. “Ureolytic activities of a urease-producing bacterium and purified urease enzyme in the anoxic condition: Implication for subseafloor sand production control by microbially induced carbonate precipitation (MICP).” Ecol. Eng. 90 (May): 96–104. https://doi.org/10.1016/j.ecoleng.2016.01.073.
Li, C., D. Yao, S. Liu, T. Zhou, S. Bai, Y. Gao, and L. Li. 2018. “Improvement of geomechanical properties of bio-remediated aeolian sand.” Geomicrobiol. J. 35 (2): 132–140. https://doi.org/10.1080/01490451.2017.1338798.
Li, M., L. Li, U. Ogbonnaya, K. Wen, A. Tian, and F. Amini. 2015. “Influence of fiber addition on mechanical properties of MICP-treated sand.” J. Mater. Civ. Eng. 28 (4): 04015166. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001442.
Montoya, B. M., and J. T. DeJong. 2015. “Stress-strain behavior of sands cemented by microbially induced calcite precipitation.” J. Geotech. Geoenviron. Eng. 141 (6): 04015019. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001302.
Montoya, B. M., J. T. DeJong, and R. W. Boulanger. 2013. “Dynamic response of liquefiable sand improved by microbial-induced calcite precipitation.” Geotechnique 63 (4): 302–312. https://doi.org/10.1680/geot.SIP13.P.019.
Mortensen, B. M., M. J. Haber, J. T. DeJong, L. F. Caslake, and D. C. Nelson. 2011. “Effects of environmental factors on microbial induced calcium carbonate precipitation.” J. Appl. Microbiol. 111 (2): 338–349. https://doi.org/10.1111/j.1365-2672.2011.05065.x.
Pham, V., A. Nakano, W. R. L. van der Star, T. Heimovaara, and L. van Paassen. 2016. “Applying MICP by denitrification in soils: A process analysis.” Environ. Geotech. 5 (2): 79–93. https://doi.org/10.1680/jenge.15.00078.
Ramachandran, S. K., V. Ramakrishnan, and S. S. Bang. 2001. “Remediation of concrete using micro-organisms.” ACI Mater. J. 98 (1): 3–9.
Rebata-Landa, V. 2007. “Microbial activity in sediments: Effects on soil behavior.” Ph.D. dissertation, School of Civil and Environmental Engineering, Georgia Institute of Technology.
Salifu, E., E. MacLachlan, K. R. Iyer, C. W. Knapp, and A. Tarantino. 2016. “Application of microbially induced calcite precipitation in erosion mitigation and stabilisation of sandy soil foreshore slopes: A preliminary investigation.” Eng. Geol. 201: 96–105. https://doi.org/10.1016/j.enggeo.2015.12.027.
Shao, W., B. Cetin, Y. Li, J. Li, and L. Li. 2014. “Experimental investigation of mechanical properties of sands reinforced with discrete randomly distributed fiber.” Geotech. Geol. Eng. 32 (4): 901–910. https://doi.org/10.1007/s10706-014-9766-3.
Wen, K., C. Bu, S. Liu, Y. Li, and L. Li. 2018a. “Experimental investigation of flexure resistance performance of bio-beams reinforced with discrete randomly distributed fiber and bamboo.” Constr. Build. Mater. 176 (Jul): 241–249. https://doi.org/10.1016/j.conbuildmat.2018.05.032.
Wen, K., Y. Li, S. Liu, C. Bu, and L. Li. 2018b. “Development of an improved immersing method to enhance microbial induced calcite precipitation treated sandy soil through multiple treatments in low cementation media concentration.” Geotech. Geol. Eng. 37 (2): 1015–1027. https://doi.org/10.1007/s10706-018-0669-6.
Wen, K., Y. Li, S. Liu, C. Bu, and L. Li. 2019. “Evaluation of MICP treatment through electric conductivity and pH test in urea hydrolyzed process.” Environ. Geotech. 1–8. https://doi.org/10.1680/jenge.17.00108.
Xie, S., L. Qi, and D. Zhou. 2004. “Investigation of the effects of acid rain on the deterioration of cement concrete using accelerated tests established in laboratory.” Atmos. Environ. 38 (27): 4457–4466. https://doi.org/10.1016/j.atmosenv.2004.05.017.
Zhao, Q., L. Li, C. Li, M. Li, F. Amini, and H. Zhang. 2014a. “Factors affecting improvement of engineering properties of MICP-treated soil catalyzed by bacteria and urease.” J. Mater. Civ. Eng. 26 (12): 04014094. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001013.
Zhao, Q., L. Li, C. Li, H. Zhang, and F. Amini. 2014b. “A full contact flexible mold for preparing samples based on microbial-induced calcite precipitation technology.” Geotech. Test. J. 37 (5): 917–921. https://doi.org/10.1520/GTJ20130090.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Nov 14, 2018
Accepted: Jun 14, 2019
Published online: Sep 20, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.