Expansive Behavior in Circular Steel Tube Stub Columns of SCC Blended with CFB Bottom Ashes
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 11
Abstract
This work provides a systematic analysis of the expansive and load-deformation behaviors in circular steel tube stub columns (CSTCs) of self-compacting concrete (SCC) blended with ground circulating fluidized bed (CFB) bottom ashes (BAs). A series of SCCs with different expansive properties was fabricated by adding CFB-BAs. As the dosage of CFB-BAs increased, the time-dependent circumferential and axial strains increased. The expansive and load-deformation behaviors of cured SCCs filling the CSTCs were evaluated. Time-dependent expansive strain (TDES) measurements revealed that the expansive behavior in both the circumferential and axial directions had the same variation trend. The circumferential TDES values were much larger than the axial values. The axial load-displacement relations indicated that the specimen with 30% CFB-BAs had a 34% higher ultimate load, and it had a 54% higher ultimate load when 1.5% sodium sulfate was added to the specimen. The prestress had a significant impact on the ultimate capacity of concrete-filled steel tubes (CFTs). However, the ultimate capacity still was determined by the compressive strength of the core concrete, and it was not directly proportional to the initial prestress. The specimen with a 4-mm wall thickness and 30% CFB-BAs gained the most ultimate stress, indicating that the wall thicknesses of steel tubes had a distinct influence on the load-deformation behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was financially supported by the Graduate Student Education Innovation Projects of Shanxi Province (No. 2016163), Science Fundamental Research Projects of Shanxi Province (Nos. 201601D202048 and 201801D221233), Key Research and Development (R&D) Projects of Shanxi Province (No. 201803D121037), Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (No. 2015062), and Key Research Projects of Shanxi Province (No. 201703D321009-2).
References
Carballosa, P., J. L. García Calvo, D. Revuelta, J. J. Sánchez, and J. P. Gutiérrez. 2015. “Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elements.” Constr. Build. Mater. 93 (Sep): 223–229. https://doi.org/10.1016/j.conbuildmat.2015.05.113.
CECS. 2012. Technical specification for concrete-filled steel tubular structures. CECS 28. Beijing: Standardization Institute of Chinese Construction, China Planning Pass.
Chen, X. M., Y. Yan, Y. Z. Liu, and Z. H. Hu. 2014. “Utilization of circulating fluidized bed fly ash for the preparation of foam concrete.” Constr. Build. Mater. 54 (3): 137–146. https://doi.org/10.1016/j.conbuildmat.2013.12.020.
Dadsetan, D., and J. P. Bai. 2017. “Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash.” Constr. Build. Mater. 146 (Aug): 658–667. https://doi.org/10.1016/j.conbuildmat.2017.04.158.
Davood, N., K. B. Siham, and M. Habib-Abdelhak. 2017. “Self-compacting concretes with supplementary cementitious materials: Shrinkage and cracking tendency.” J. Mater. Civ. Eng. 29 (7): 04017033. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001852.
Dung, N. T., T. P. Chang, and C. T. Chen. 2014. “Engineering and sulfate resistance properties of slag-CFBC fly ash paste and mortar.” Constr. Build. Mater. 63 (8): 40–48. https://doi.org/10.1016/j.conbuildmat.2014.04.009.
Esat, K. A., G. Ehsan, and I. Ragip. 2017. “Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method.” J. Cleaner Prod. 144 (Feb): 192–202. https://doi.org/10.1016/j.jclepro.2016.12.156.
Ferrara, L., P. Bamonte, A. Caverzan, A. Musa, and I. Sanal. 2012. “A comprehensive methodology to test the performance of steel fibre reinforced self-compacting concrete (SFR-SCC).” Constr. Build. Mater. 37 (12): 406–424. https://doi.org/10.1016/j.conbuildmat.2012.07.057.
Hajime, O., and O. Kazumasa. 2010. “Self-compacting high performance concrete.” Prog. Struct. Eng. Mater. 1 (4): 378–383.
Han, L. H., G. H. Yao, Q. Yu, and Z. P. Chen. 2005. “Experimental behavior of steel tube confined concrete (STCC) columns.” Steel Compos. Struct. 5 (6): 459–484. https://doi.org/10.12989/scs.2005.5.6.459.
JGJ. 2012. Technical specification for application of self-compacting concrete. JGJ/T 283. Beijing: Ministry of Housing and Urban Rural Development of People’s Republic of China.
Khairallah, F. 2013. “Mechanical behavior of confined self-compacting reinforced concrete circular columns under concentric axial loading.” Ain Shams Eng. J. 4 (4): 641–649. https://doi.org/10.1016/j.asej.2013.01.009.
Li, G. Y., X. H. Zhao, and L. Q. Chen. 2003. “Improve the strength of concrete-filled steel tubular columns by the use of fly ash.” Cem. Concr. Res. 33 (5): 733–739. https://doi.org/10.1016/S0008-8846(02)01037-2.
Li, X. G., Q. B. Chen, K. Z. Huang, B. G. Ma, and B. Wu. 2012. “Cementitious properties and hydration mechanism of circulating fluidized bed combustion (CFBC) desulfurization ashes.” Constr. Build. Mater. 36 (4): 182–187. https://doi.org/10.1016/j.conbuildmat.2012.05.017.
Maenami, H., N. Isu, E. H. Ishida, and T. Mitsuda. 2004. “Electron microscopy and phase analysis of fly ash from pressurized fluidized bed combustion.” Cem. Concr. Res. 34 (5): 781–788. https://doi.org/10.1016/j.cemconres.2003.08.011.
Mo, L. W., M. Deng, M. S. Tang, and A. Al-Tabbaa. 2014. “MgO expansive cement and concrete in china: Past, present and future.” Cem. Concr. Res. 57 (3): 1–12. https://doi.org/10.1016/j.cemconres.2013.12.007.
Naganathan, S., A. Y. O. Mohamed, and K. N. Mustapha. 2015. “Performance of bricks made using fly ash and bottom ash.” Constr. Build. Mater. 96 (Oct): 576–580. https://doi.org/10.1016/j.conbuildmat.2015.08.068.
Nguyen, H. A., T. P. Chang, J. Y. Shih, C. T. Chen, and T. D. Nguyen. 2015. “Influence of circulating fluidized bed combustion (CFBC) fly ash on properties of modified high volume low calcium fly ash (HVFA) cement paste.” Constr. Build. Mater. 91 (Aug): 208–215. https://doi.org/10.1016/j.conbuildmat.2015.05.075.
Oliveira, M. J., A. B. Ribeiro, and F. G. Branco. 2014. “Combined effect of expansive and shrinkage reducing admixtures to control autogenous shrinkage in self-compacting concrete.” Constr. Build. Mater. 52 (52): 267–275. https://doi.org/10.1016/j.conbuildmat.2013.11.033.
Oliveira, M. J., A. B. Ribeiro, and F. G. Branco. 2015. “Curing effect in the shrinkage of a lower strength self-compacting concrete.” Constr. Build. Mater. 93 (Sep): 1206–1215. https://doi.org/10.1016/j.conbuildmat.2015.04.035.
Pająk, M., and T. Ponikiewski. 2013. “Flexural behavior of self-compacting concrete reinforced with different types of steel fibers.” Constr. Build. Mater. 47 (10): 397–408. https://doi.org/10.1016/j.conbuildmat.2013.05.072.
Rahul, S., and A. K. Rizwan. 2017. “Sustainable use of copper slag in self-compacting concrete containing supplementary cementitious materials.” J. Cleaner Prod. 151 (May): 179–192. https://doi.org/10.1016/j.jclepro.2017.03.031.
Sheng, G. H., Q. Li, and J. P. Zhai. 2012. “Investigation on the hydration of CFBC fly ash.” Fuel 98 (4): 61–66. https://doi.org/10.1016/j.fuel.2012.02.008.
Sheng, G. H., J. P. Zhai, Q. Li, and F. H. Li. 2007. “Utilization of fly ash coming from a CFBC boiler co-firing coal and petroleum coke in portland cement.” Fuel 86 (16): 2625–2631. https://doi.org/10.1016/j.fuel.2007.02.018.
Shi, C. J., Z. M. Wu, K. X. Lv, and L. M. Wu. 2015. “A review on mixture design methods for self-compacting concrete.” Constr. Build. Mater. 84 (Jun): 387–398. https://doi.org/10.1016/j.conbuildmat.2015.03.079.
Song, Y. M., C. C. Guo, J. S. Qian, and T. Ding. 2015. “Effect of the Ca-to-Si ratio on the properties of autoclaved aerated concrete containing coal fly ash from circulating fluidized bed combustion boiler.” Constr. Build. Mater. 83 (May): 136–142. https://doi.org/10.1016/j.conbuildmat.2015.02.077.
Soutsos, M. N., G. Turu’Allo, K. Owens, J. Kwasny, S. J. Barnett, and P. A. M. Basheer. 2013. “Maturity testing of lightweight self-compacting and vibrated concretes.” Constr. Build. Mater. 47 (47): 118–125. https://doi.org/10.1016/j.conbuildmat.2013.04.045.
Wu, T., M. Chi, and R. Huang. 2014. “Characteristics of CFBC fly ash and properties of cement-based composites with CFBC fly ash and coal-fired fly ash.” Constr. Build. Mater. 66 (1): 172–180. https://doi.org/10.1016/j.conbuildmat.2014.05.057.
Xiong, R., Z. A. Lu, Z. G. Ren, and C. G. He. 2012. “Experimental research on the performance of micro-expansion and self-compacting concrete-filled steel tubular short column under axial compression.” Procedia Earth Planet. Sci. 5 (32): 19–24. https://doi.org/10.1016/j.proeps.2012.01.004.
Xu, H., Q. Li, L. F. Shen, W. Wang, and J. P. Zhai. 2010. “Synthesis of thermostable geopolymer from circulating fluidized bed combustion (CFBC) bottom ashes.” J. Hazard. Mater. 175 (1–3): 198–204. https://doi.org/10.1016/j.jhazmat.2009.09.149.
Xu, L., C. K. Huang, and Y. Liu. 2007. “Expansive performance of self-stressing and self-compacting concrete confined with steel tube.” J. Wuhan Univ. Technol. (Mater. Sci. Ed.) 22 (2): 341–345. https://doi.org/10.1007/s11595-005-2341-2.
Yu, Z. W., F. X. Ding, and C. S. Cai. 2007. “Experimental behavior of circular concrete-filled steel tube stub columns.” J. Constr. Steel Res. 63 (2): 165–174. https://doi.org/10.1016/j.jcsr.2006.03.009.
Zhang, Z. W., J. S. Qian, C. You, and C. H. Hu. 2012. “Use of circulating fluidized bed combustion fly ash and slag in autoclaved brick.” Constr. Build. Mater. 35 (10): 109–116. https://doi.org/10.1016/j.conbuildmat.2012.03.006.
Zhao, J. H., D. M. Wang, and S. C. Liao. 2015. “Effect of mechanical grinding on physical and chemical characteristics of circulating fluidized bed fly ash from coal gangue power plant.” Constr. Build. Mater. 101 (Dec): 851–860. https://doi.org/10.1016/j.conbuildmat.2015.10.144.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 13, 2017
Accepted: Jun 5, 2019
Published online: Sep 4, 2019
Published in print: Nov 1, 2019
Discussion open until: Feb 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.