Shear Performance of Adhesive Bonding of Cross-Laminated Bamboo
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 9
Abstract
Tests were conducted of the bonding shear strength of different bamboo configurations in terms of grain direction, adhesive, and clamping pressure. The bonding shear tests were carried out with two basic configurations: glued together with the grain in the same direction, and cross-laminated. Five different adhesives were used: emulsion polymer isocyanate (EPI), polyurethane (PUR), melamine-urea-formaldehyde (MUF), hybrid polymer adhesive (HPA), and polyvinyl acetate (PVA). To assess the optimum value, specimens were prepared with three clamping pressures. According to the test results, the most suitable adhesive for glued laminated bamboo surface is MUF; EPI is not effective for bonding laminated bamboo elements, and PVA performs the best for scrimber produced with cross-laminated bamboo. The results also showed that end grain specimens had the highest bonding shear strengths among the four configurations, and that, in accordance with the properties of raw bamboo, cross-laminated types exhibited similar mechanical characteristics in both directions. It can be concluded that the testing method used for cross laminated timber is also suitable for assessing the shear strength of adhesive bonds for cross-laminated bamboo.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the funding SURF201707 provided by Xi’an Jiaotong-Liverpool University for this project. The authors also thank Greeniche Technologies and Pattex, Henkel, for providing the adhesives for this research.
References
Anokye, R., E. S. Bakar, J. Ratnasingam, A. C. C. Yong, and N. N. Bakar. 2016. “The effects of nodes and resin on the mechanical properties of laminated bamboo timber produced from Gigantochloa scortechinii.” Constr. Build. Mater. 105 (Feb): 285–290. https://doi.org/10.1016/j.conbuildmat.2015.12.083.
Anwar, U., M. Paridah, H. Hamdan, M. Abd Latif, and A. Zaidon. 2005. “Adhesion and bonding properties of plybamboo manufactured from Gigantochloa scortechinii.” Am. J. Appl. Sci. 53–58.
Archila, H. 2015. “Thermo-hydro-mechanically modified cross-laminated Guadua-bamboo panels.” Ph.D. thesis, Dept. of Architecture and Civil Engineering, Univ. of Bath.
Archila, H. F., M. P. Ansell, and P. Walker. 2014. “Mechanical characterization of engineered Guadua-bamboo panels using digital image correlation.” In Proc., Young Researchers Forum Ii: Construction Materials. Surrey, UK: Institute of Concrete Technology.
ASTM. 2006. Standard test methods for evaluating properties of wood-base fiber and particle panel materials. ASTM D1037. West Conshohocken, PA: ASTM.
Brandner, R. 2013. “Production and technology of cross laminated timber (CLT): A state-of-the-art report.” In Proc., Focus Solid Timber Solution-European Conf. on Cross-laminated Timber (CLT). Paris: ADIVbois.
CEN (European Committee for Standardization). 1995. Glued laminated timber: Shear test of glue line. EN 392. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004. Adhesives for load-bearing timber structures: Test methods. EN 302-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2013. Timber structures: Cross laminated timber and glued solid timber: Requirements. EN 14080. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2015. Timber structures: Cross laminated timber: Requirements. EN 16351. Brussels, Belgium: CEN.
Correal, J., and F. Ramirez. 2010. “Adhesive bond performance in glue line shear and bending for glued laminated Guadua bamboo.” J. Trop. For. Sci. 22 (4): 433–439.
Guan, M., Z. Huang, and D. Zeng. 2015. “Shear strength and microscopic characterization of a bamboo bonding interface with phenol formaldehyde resins modified with Larch thanaka and urea.” BioResources 11 (1): 492–502. https://doi.org/10.15376/biores.11.1.492-502.
Guan, M., C. Yong, and L. Wang. 2013. “Shear strain and microscopic characterization of a bamboo bonding interface with poly (vinyl alcohol) modified phenol–formaldehyde resin.” J. Appl. Polym. Sci. 130 (2): 1345–1350. https://doi.org/10.1002/app.39256.
Huang, Z., Y. Sun, and F. Musso. 2017. “Assessment of bamboo application in building envelope by comparison with reference timber.” Constr. Build. Mater. 156 (Dec): 844–860. https://doi.org/10.1016/j.conbuildmat.2017.09.026.
Knorz, M., E. Neuhaeuser, S. Torno, and J.-W. van de Kuilen. 2015. “Influence of surface preparation methods on moisture-related performance of structural hardwood–adhesive bonds.” Int. J. Adhes. Adhes. 57 (Mar): 40–48. https://doi.org/10.1016/j.ijadhadh.2014.10.003.
Kol, H. Ş., G. Özbay, and S. Altun. 2009. “Shear strength of heat-treated tali (Erythrophleum ivorense A. Chev.) and iroko (Chlorophora excelsa) woods with various adhesives.” BioResources 4 (4): 1545–1554.
Lee, C.-H., M.-J. Chung, C.-H. Lin, and T.-H. Yang. 2012. “Effects of layered structure on the physical and mechanical properties of laminated moso bamboo (Phyllosachys edulis) flooring.” Constr. Build. Mater. 28 (1): 31–35. https://doi.org/10.1016/j.conbuildmat.2011.08.038.
Li, H.-T., Q.-S. Zhang, D.-S. Huang, and A. J. Deeks. 2013. “Compressive performance of laminated bamboo.” Composites Part B 54 (Nov): 319–328. https://doi.org/10.1016/j.compositesb.2013.05.035.
Li, T., D.-L. Cheng, M. E. Wålinder, and D.-G. Zhou. 2015. “Wettability of oil heat-treated bamboo and bonding strength of laminated bamboo board.” Ind. Crops Prod. 69 (Jul): 15–20. https://doi.org/10.1016/j.indcrop.2015.02.008.
Mahdavi, M., P. Clouston, and S. Arwade. 2012. “A low-technology approach toward fabrication of laminated bamboo lumber.” Constr. Build. Mater. 29 (Apr): 257–262. https://doi.org/10.1016/j.conbuildmat.2011.10.046.
Mirmehdi, S., G. H. D. Tonoli, and P. R. G. Hein. 2016. The effects of bamboo species and adhesive type on mechanical properties of laminated bamboo lumber (LBL). Lavras, Brazil: Universidade Federal De Lavras.
Mohammad, M., S. Gagnon, B. K. Douglas, and L. Podesto. 2012. “Introduction to cross-laminated timber.” Wood Des. Focus 22 (2): 3–12.
Raftery, G., A. Harte, and P. Rodd. 2013. “Qualification of wood adhesives for structural softwood glulam with large juvenile wood content.” J. Inst. Wood Sci. 18 (1): 24–34. https://doi.org/10.1179/wsc.2008.18.1.24.
Sharma, B., A. Gatóo, M. Bock, and M. Ramage. 2015. “Engineered bamboo for structural applications.” Constr. Build. Mater. 81 (Apr): 66–73. https://doi.org/10.1016/j.conbuildmat.2015.01.077.
Sikora, K. S., D. O. Mcpolin, and A. M. Harte. 2016a. “Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shear.” Constr. Build. Mater. 116 (Jul): 141–150. https://doi.org/10.1016/j.conbuildmat.2016.04.145.
Sikora, K. S., D. O. McPolin, and A. M. Harte. 2016b. “Shear strength and durability testing of adhesive bonds in cross-laminated timber.” J. Adhes. 92 (7–9): 758–777. https://doi.org/10.1080/00218464.2015.1094391.
Sinha, A., D. Way, and S. Mlasko. 2013. “Structural performance of glued laminated bamboo beams.” J. Struct. Eng. 140 (1): 04013021. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000807.
Stoeckel, F., J. Konnerth, and W. Gindl-Altmutter. 2013. “Mechanical properties of adhesives for bonding wood—A review.” Int. J. Adhes. Adhes. 45 (Sep): 32–41. https://doi.org/10.1016/j.ijadhadh.2013.03.013.
Sulastiningsih, I., and Nurwati. 2009. “Physical and mechanical properties of laminated bamboo board.” J. Trop. For. Sci. 21 (3): 246–251.
Xiao, Y., Y. Wu, J. Li, and R. Yang. 2017. “An experimental study on shear strength of glubam.” Constr. Build. Mater. 150 (Sep): 490–500. https://doi.org/10.1016/j.conbuildmat.2017.06.005.
Xing, W., J. Hao, I. Galobardes, S. Wei, Z. Chen, and K. Sikora. 2018. “Engineered bamboo’s further application: An empirical study in China.” In Proc., MATEC Web of Conf. Paris: EDP Sciences.
Yu, Y., R. Liu, Y. Huang, F. Meng, and W. Yu. 2017. “Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber.” Constr. Build. Mater. 157 (Dec): 1032–1039. https://doi.org/10.1016/j.conbuildmat.2017.09.185.
Zhang, S. 2015. “Research on the application of bamboo-based composites material in the building.” [In Chinese.] Master’s thesis, Dept. of Management Science and Engineering, Chongqing Jiaotong Univ.
Zheng, Y., Z. Jiang, Z. Sun, and H. Ren. 2014. “Effect of microwave-assisted curing on bamboo glue strength: Bonded by thermosetting phenolic resin.” Constr. Build. Mater. 68 (Oct): 320–325. https://doi.org/10.1016/j.conbuildmat.2014.07.014.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 15, 2018
Accepted: Apr 4, 2019
Published online: Jun 25, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.