Air Void Characterization in Sand-Sulfur-Bitumen Mixes
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 9
Abstract
This paper represents an attempt to study the internal structure of sand-sulfur-bitumen (SSB) mixes with the help of effective and quick three-dimensional (3D), high-resolution technology such as X-ray micro-computed tomography coupled with digital image processing tools. Various air void parameters, such as air void content, connected air void content, size and shape of air void, and tortuosity of compacted specimens, were determined and compared with those of a conventional dense graded bituminous mixture. Further, a statistical approach was used to fit the distribution of air void size in SSB mixes based on a lognormal function. The associated scale and location parameters of the lognormal function were used to evaluate the influence of various factors such as type of filler, use of crusher dust, and variation in bitumen content on the distribution of air void size. A substantial improvement in the air void characteristics and tortuosity was observed with the addition of fillers and crusher dust, although the effects of filler type were not significant.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the support of the Indian Institute of Technology, Kharagpur, West Bengal, India, for allowing them to use the X-ray CT facility for image acquisition. The writers also express their thanks to the technical and nontechnical staff of the Highway Laboratory of the National Institute of Technology, Rourkela, Odisha, India, for their assistance during material collection and specimen preparation.
References
Alvarez, A. E., A. E. Martin, and C. Estakhri. 2009. “Connected air voids content in permeable friction course mixtures.” J. Test. Eval. 37 (3): 254–263. https://doi.org/10.1520/JTE102056.
Alvarez, A. E., A. E. Martin, and C. Estakhri. 2010. “Internal structure of compacted permeable friction course mixtures.” Constr. Build. Mater. 24 (6): 1027–1035. https://doi.org/10.1016/j.conbuildmat.2009.11.015.
Baig, M. G., and H. I. A. Wahhab. 2013. “Assesment of sulfur containing air pollutants in utilizing the sulfur extended asphalt concrete mixes in Saudi Arabia.” Int. J. Dev. Res. 4 (1): 144–152.
Brown, E. R., and S. A. Cross. 1992. A national study of rutting in hot mix (HMA) pavements. Auburn, AL: National Center for Asphalt Technology.
Burgess, R. A., and I. Deme. 1975. “Sulfur in asphalt paving mixes.” Chap. 6 in New uses of sulfur, 85–101. Washington, DC: ACS.
Cooper III, S. B., L. N. Mohammad, and M. A. Elseifi. 2011. “Laboratory performance characteristics of sulfur-modified warm-mix asphalt.” J. Mater. Civ. Eng. 23 (9): 1338–1345.https://doi.org/10.1061/(ASCE)MT.1943-5533.0000303.
Denison, C., W. D. Carlson, and R. A. Ketcham. 1997. “Three-dimensional quantitative textural analysis of metamorphic rocks using high-resolution computed X-ray tomography: Part I. Methods and techniques.” J. Metamorph. Geol. 15 (1): 29–44. https://doi.org/10.1111/j.1525-1314.1997.00006.x.
Gao, L., F. Ni, H. Luo, and S. Charmot. 2015. “Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography.” Constr. Build. Mater. 84 (Jun): 429–436. https://doi.org/10.1016/j.conbuildmat.2015.03.081.
Hiltunen, D. R., and R. Roque. 1994. “A mechanics-based prediction model for thermal cracking of asphaltic concrete pavements (with Discussion).” J. Assoc. Asphalt Paving Technol. 63: 81–117.
Kaczmarek, L. D., Y. Zhao, H. Konietzky, T. Wejrzanowski, and M. Maksimczuk. 2017. “Numerical approach in recognition of selected features of rock structure from hybrid hydrocarbon reservoir samples based on microtomography.” Stud. Geotech. Mech. 39 (1): 13–26. https://doi.org/10.1515/sgem-2017-0002.
Lublóy, É., D. Ambrus, K. Kapitány, and Á. Barsi. 2015. “Air void distribution of asphalts determined by computed tomography.” Period. Polytech. Civ. Eng. 59 (4): 503–510. https://doi.org/10.3311/PPci.7608.
Lv, Y. J., L. Zhang, and X. L. Zhou. 2011. “Microstructure index of hot mix asphalt.” Road Mater. New Innovations Pavement Eng. 9–16.
Mahmud, M. Z. H., N. A. Hassan, M. R. Hainin, and C. R. Ismail. 2017. “Microstructural investigation on air void properties of porous asphalt using virtual cut section.” Constr. Build. Mater. 155 (Nov): 485–494. https://doi.org/10.1016/j.conbuildmat.2017.08.103.
Masad, E., V. K. Jandhyala, N. Dasgupta, N. Somadevan, and N. Shashidhar. 2002. “Characterization of air void distribution in asphalt mixes using X-ray computed tomography.” J. Mater. Civ. Eng. 14 (2): 122–129. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:2(122).
Mazumdar, M., and S. K. Rao. 1985. “Effect of comparative efforts on sand-asphalt–sulphur mixes.” Can. J. Civ. Eng. 12 (4): 916–919. https://doi.org/10.1139/l85-104.
Mazumdar, M., and S. K. Rao. 1993. “Effect of flyash on engineering properties of sand-asphalt-sulfur paving mixes.” Transp. Res. Rec. 144–149.
Monismith, C. L. 1992. “Analytically based asphalt pavement design and rehabilitation.” Transp. Res. Rec. 1354: 5–26.
MoRTH (Ministry of Road Transport and Highways). 2013. Specifications for road and bridge works. New Delhi, India: Indian Roads Congress.
Rao, P. P., A. P. Kumar, B. B. Singh, and A. Tigga. 2016. “An investigation on sand asphalt sulfur mixes by using polymer modified binder.” Eur. Transp. 2016 (62): 1–9.
Roberts, F. L., P. S. Kandhal, E. R. Brown, D.-Y. Lee, and T. W. Kennedy. 1996. Hot mix asphalt materials, mixture design and construction. Lanham, MD: NAPA Research and Education Foundation.
Satyakumar, M., and R. Satheeshchandran. 2013. “Experimental investigations of effect of sulphur on beach sand-fly ash-asphalt (SFA) paving mixes.” Civ. Eng. Dimension 15 (1): 36–42. https://doi.org/10.9744/ced.15.1.36-42.
Saylak, D., B. M. Gallaway, and H. Ahmad. 1975. “Beneficial use of sulfur in sulfur-asphalt pavements.” Adv. Chem. 140: 102–129.
Scheidegger, A. E. 1958. The physics of flow through porous media. London: Univ. of Toronto Press.
Scholes, O. N., S. A. Clayton, A. F. A. Hoadley, and C. Tiu. 2007. “Permeability anisotropy due to consolidation of compressible porous media.” Transp. Porous Media 68 (3): 365–387. https://doi.org/10.1007/s11242-006-9048-5.
Strickland, D., J. Colange, M. Martin, and I. Deme. 2008. Performance properties of sulphur extended asphalt mixtures with modified sulphur pellets. Lino Lakes, MN: International Society for Asphalt Pavements.
Tashman, L., L. Wang, and S. Thyagarajan. 2011. “Microstructure characterization for modeling HMA behaviour using imaging technology.” Road Mater. Pavement Des. 8 (2): 207–238. https://doi.org/10.1080/14680629.2007.9690073.
Tayebali, A. A., J. A. Deacon, J. S. Coplantz, J. T. Harvey, and C. L. Monismith. 1994. “Mix and mode-of-loading effects on fatigue response of asphalt-aggregate mixes.” J. Assoc. Asphalt Paving Technol. 63: 118–151.
Timm, D., N. Tran, A. Taylor, M. Robbins, and B. Powell. 2009. Evaluation of mixture performance and structural capacity of pavements using Shell Thiopave, Phase I: Mix design, laboratory performance evaluation and structural pavement analysis and design. Auburn, AL: National Center for Asphalt Technology.
Tjaden, B., D. J. Brett, and P. R. Shearing. 2016. “Tortuosity in electrochemical devices: A review of calculation approaches.” Int. Mater. Rev. 63 (2): 47–67. https://doi.org/10.1080/09506608.2016.1249995.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 13, 2018
Accepted: Apr 1, 2019
Published online: Jun 24, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 24, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.