Experimental and Modeling Studies of Resilient Modulus and Permanent Strain of Stabilized Fly Ash
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 8
Abstract
In the present investigation, geotechnical properties of fly ash lime (FAL) mixes and fly ash cement (FAC) mixes were studied for their use as a subbase material for flexible road pavements. The effects of lime content, cement content and curing age on unconfined compressive strength (UCS), resilient modulus, and permanent strain of these mixes were studied. Fly ash with minimum 6% lime content and fly ash with minimum 6% cement content satisfy the minimum strength criteria recommended by the Indian Road Congress (IRC) for their use as subbase materials. These mixes exhibited higher resilient modulus than the conventional granular subbase (GSB). The influence of wetting-drying (W-D) cycles on resilient modulus was also reported in this study. The fitting of different existing models for the measured data of resilient modulus and permanent strain was compared, and the model parameters of FAL and FAC mixes for the best fitting model were determined.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 2000. Determining the resilient modulus of soils and aggregate materials. AASHTO T307. Washington, DC: AASHTO.
AASHTO. 2008. Mechanistic-empirical pavement design guide. Washington, DC: Transportation Research Board.
Arulrajah, A., J. Piratheepan, M. M. Disfani, and M. W. Bo. 2013. “Resilient moduli response of recycled construction and demolition materials in pavement subbase applications.” J. Mater. Civ. Eng. 25 (12): 1920–1928. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000766.
ASTM. 1999. Standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2003. Standard test methods for wetting and drying compacted soil-cement mixtures. ASTM D559. West Conshohocken, PA: ASTM.
Bennert, T., W. J. Papp, A. Maher Jr., and N. Gucunski. 2000. “Utilization of construction and demolition debris under traffic-type loading in base and subbase applications.” Transp. Res. Rec. 1714 (1): 33–39. https://doi.org/10.3141/1714-05.
Consoli, N. C., A. D. Rosa, and R. B. Saldanha. 2011. “Variables governing strength of compacted soil-fly ash-lime mixtures.” J. Mater. Civ. Eng. 23 (4): 432–440. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000186.
Ghosh, A., and C. Subbarao. 2007. “Strength characteristics of class F fly ash modified with lime and gypsum.” J. Geotech. Geoenviron. Eng. 133 (7): 757–766. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:7(757).
IRC (Indian Roads Congress). 2002. Rural roads manual. IRC SP 20. New Delhi: IRC.
Kaniraj, S. R., and V. Gayathri. 2003. “Factors influencing the strength of cement fly ash base courses.” J. Transp. Eng. 129 (5): 538–548. https://doi.org/10.1061/(ASCE)0733-947X(2003)129:5(538).
Khoury, N., and M. M. Zaman. 2007. “Durability of stabilized base courses subjected to wet-dry cycles.” Int. J. Pavement Eng. 8 (4): 265–276. https://doi.org/10.1080/10298430701342874.
Kumar, M. A., and G. V. R. P. Raju. 2009. “Use of lime cement stabilized pavement construction.” Indian J. Eng. Mater. Sci. 16 (4): 269–276.
Patel, S. 2016. “Experimental and numerical studies on utilization of some industrial wastes in flexible road pavements.” Ph.D. dissertation, Dept. of Civil Engineering, Indian Institute of Technology.
Patel, S., and J. T. Shahu. 2016. “Resilient response and permanent strain of steel slag-fly ash-dolime mix.” J. Mater. Civ. Eng. 28 (10): 04016106. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001619.
Peerapong, J., and N. Hamid. 2009. “Mechanical behaviours of hydrated cement treated crushed rock base as a road base material in Western Australia.” Int. J. Pavement Eng. 10 (1): 39–47.https://doi.org/10.1080/10298430802342682.
Puppala, A. J., L. R. Hoyos, and A. K. Potturi. 2011. “Resilient moduli response of moderately cement-treated reclaimed asphalt pavement aggregates.” J. Mater. Civ. Eng. 23 (7): 990–998. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000268.
Puppala, A. J., L. N. Mohammad, and A. Allen. 1999. “Permanent deformation characterization of subgrade soils from RLT test.” J. Mater. Civ. Eng. 11 (4): 274–282. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(274).
Sivapullaiah, P. V., and A. A. B. Moghal. 2011. “Role of gypsum in the strength development of fly ashes with lime.” J. Mater. Civ. Eng. 23 (2): 197–206. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000158.
Ullditz, P. 1993. “Mathematical model for pavement performance under moving wheel load.” Transp. Res. Rec. 1384: 94–99.
Uzan, J. 1985. “Characterization of granular materials.” Transp. Res. Rec. 1022: 52–59.
Witczak, M., and J. Uzan. 1988. The universal airport design system, ‘Rep. I of IV: Granular material characterization. College Park, MD: Univ. of Maryland.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 16, 2017
Accepted: Feb 19, 2019
Published online: May 17, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.