Reutilization of Clay Brick Waste in Mortar: Paste Replacement versus Cement Replacement
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 7
Abstract
Clay brick waste is one of the largest construction wastes by output. Traditionally, clay brick waste is reutilized in mortar/concrete as aggregate replacement after crushing or as cement replacement after grinding, but these two methods of reutilization have certain adverse effects on the quality of mortar/concrete. In this study, a new method, named the paste replacement method, was developed; in this method, clay brick dust (CBD) is used to replace cementitious paste with the paste composition kept unchanged. To compare the effectiveness of the paste replacement and cement replacement methods, mortar mixes with different replacement ratios of CBD (either as paste replacement or cement replacement) were tested to study their workability, strength, and microstructure. The test results showed that CBD added as paste replacement improved the strength and microstructure and substantially reduced the cement content, whereas adding CBD as cement replacement decreased the strength and loosened the microstructure. Hence, the paste replacement method is more promising for recycling clay brick waste and producing eco-friendly concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by National Natural Science Foundation of China (Project Nos. 51608131 and 51678161), Natural Science Foundation of Guangdong Province (Project No. 2015A030310282), Science and Technology Planning Project of Guangzhou City (Project No. 201607010329), Guangdong University of Technology via its “One-Hundred Young Talents Plan” program (Project No. 220413508), and Featured and Innovative Project for Colleges and Universities of Guangdong Province (Project No. 2017KTSCX061).
References
Adazabra, A. N., G. Viruthagiri, and N. Shanmugam. 2017. “Infrared analysis of clay bricks incorporated with spent shea waste from the shea butter industry.” J. Environ. Manage. 191 (Apr): 66–74. https://doi.org/10.1016/j.jenvman.2017.01.006.
Anjos, M. A. G. D., A. T. C. Sales, and N. Andrade. 2017. “Blasted copper slag as fine aggregate in portland cement concrete.” J. Environ. Manage. 196 (Jul): 607–613. https://doi.org/10.1016/j.jenvman.2017.03.032.
Bektas, F., K. Wang, and H. Ceylan. 2009. “Effects of crushed clay brick aggregate on mortar durability.” Constr. Build. Mater. 23 (5): 1909–1914. https://doi.org/10.1016/j.conbuildmat.2008.09.006.
Böke, H., S. Akkurt, B. İpekoğlu, and E. Uğurlu. 2006. “Characteristics of brick used as aggregate in historic brick-lime mortars and plasters.” Cem. Concr. Res. 36 (6): 1115–1122. https://doi.org/10.1016/j.cemconres.2006.03.011.
Boukour, S., and M. L. Benmalek. 2016. “Performance evaluation of a resinous cement mortar modified with crushed clay brick and tire rubber aggregate.” Constr. Build. Mater. 120 (Sep): 473–481. https://doi.org/10.1016/j.conbuildmat.2016.05.119.
Cachim, P. B. 2009. “Mechanical properties of brick aggregate concrete.” Constr. Build. Mater. 23 (3): 1292–1297. https://doi.org/10.1016/j.conbuildmat.2008.07.023.
Chatveera, B., and P. Lertwattanaruk. 2011. “Durability of conventional concretes containing black rice husk ash.” J. Environ. Manage. 92 (1): 59–66. https://doi.org/10.1016/j.jenvman.2010.08.007.
China Cement. 2019. “2018 Annual report for cement industry.” Accessed June 2018. [In Chinese.] http://www.ccement.com/news/content/53849073037972.html.
Drew, L. J., W. H. Langer, and J. S. Sachs. 2002. “Environmentalism and natural aggregate mining.” Nat. Resour. Res. 11 (1): 19–28. https://doi.org/10.1023/A:1014283519471.
Gao, C., L. Huang, L. Yan, B. Kasal, and W. Li. 2016. “Behavior of glass and carbon FRP tube encased recycled aggregate concrete with recycled clay brick aggregate.” Compos. Struct. 155 (Nov): 245–254. https://doi.org/10.1016/j.compstruct.2016.08.021.
Ge, Z., Y. Wang, R. Sun, X. Wu, and Y. Guan. 2015a. “Influence of ground waste clay brick on properties of fresh and hardened concrete.” Constr. Build. Mater. 98 (Nov): 128–136. https://doi.org/10.1016/j.conbuildmat.2015.08.100.
Ge, Z., H. Yue, and R. Sun. 2015b. “Properties of mortar produced with recycled clay brick aggregate and PET.” Constr. Build. Mater. 93 (Sep): 851–856. https://doi.org/10.1016/j.conbuildmat.2015.05.081.
Georgiopoulou, M., and G. Lyberatos. 2017. “Life cycle assessment of the use of alternative fuels in cement kilns: A case study.” J. Environ. Manage. 216 (Jun): 224–234. https://doi.org/10.1016/j.jenvman.2017.07.017.
He, C., B. Osbaeck, and E. Makovicky. 1995. “Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects.” Cem. Concr. Res. 25 (8): 1691–1702. https://doi.org/10.1016/0008-8846(95)00165-4.
Kirgiz, M. S. 2015. “Use of ultrafine marble and brick particles as raw materials in cement manufacturing.” Mater. Struct. 48 (9): 2929–2941. https://doi.org/10.1617/s11527-014-0368-6.
Kou, S. C., and C. S. Poon. 2009. “Properties of self-compacting concrete prepared with recycled glass aggregate.” Cem. Concr. Compos. 31 (2): 107–113. https://doi.org/10.1016/j.cemconcomp.2008.12.002.
Kwan, A. K. H., L. G. Li, and W. W. S. Fung. 2012. “Wet packing of blended fine and coarse aggregate.” Mater. Struct. 45 (6): 817–828. https://doi.org/10.1617/s11527-011-9800-3.
Kwan, A. K. H., and M. McKinley. 2014. “Packing density and filling effect of limestone fines.” Adv. Concr. Constr. 2 (3): 209–227. https://doi.org/10.12989/acc.2014.2.3.209.
Li, L. G., J. J. Chen, and A. K. H. Kwan. 2017a. “Roles of packing density and water film thickness in strength and durability of limestone fines concrete.” Mag. Concr. Res. 69 (12): 595–605. https://doi.org/10.1680/jmacr.16.00067.
Li, L. G., Z. H. Huang, Y. P. Tan, A. K. H. Kwan, and H. Y. Chen. 2019a. “Recycling of marble dust as paste replacement for improving strength, microstructure and eco-friendliness of mortar.” J. Clean. Prod. 210 (Feb): 55–65. https://doi.org/10.1016/j.jclepro.2018.10.332.
Li, L. G., Z. H. Huang, Y. P. Tan, A. K. H. Kwan, and F. Liu. 2018a. “Use of marble dust as paste replacement for recycling waste and improving durability and dimensional stability of mortar.” Constr. Build. Mater. 166: 423–432. https://doi.org/10.1016/j.conbuildmat.2018.01.154.
Li, L. G., Z. H. Huang, J. Zhu, A. K. H. Kwan, and H. Y. Chen. 2017b. “Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar.” Constr. Build. Mater. 140: 229–238. https://doi.org/10.1016/j.conbuildmat.2017.02.115.
Li, L. G., and A. K. H. Kwan. 2015. “Adding limestone fines as cementitious paste replacement to improve tensile strength, stiffness and durability of concrete.” Cem. Concr. Compos. 60 (Jul): 17–24. https://doi.org/10.1016/j.cemconcomp.2015.02.006.
Li, L. G., and A. K. H. Kwan. 2017. “Roles of superplasticiser dosage, water film thickness and slurry film thickness in flowability of cementitious paste.” Adv. Cem. Res. 29 (7): 287–301. https://doi.org/10.1680/jadcr.16.00187.
Li, L. G., C. J. Lin, G. M. Chen, A. K. H. Kwan, and T. Jiang. 2017c. “Effects of packing on compressive behaviour of recycled aggregate concrete.” Constr. Build. Mater. 157 (Dec): 757–777. https://doi.org/10.1016/j.conbuildmat.2017.09.097.
Li, L. G., Y. M. Wang, Y. P. Tan, and A. K. H. Kwan. 2019b. “Filler technology of adding granite dust to reduce cement content and increase strength of mortar.” Powder Technol. 342 (Jan): 388–396. https://doi.org/10.1016/j.powtec.2018.09.084.
Li, L. G., Y. M. Wang, Y. P. Tan, A. K. H. Kwan, and L. J. Li. 2018b. “Adding granite dust as paste replacement to improve durability and dimensional stability of mortar.” Powder Technol. 333 (Jun): 269–276. https://doi.org/10.1016/j.powtec.2018.04.055.
Li, L. G., J. Zhu, Z. H. Huang, A. K. H. Kwan, and L. J. Li. 2017d. “Combined effects of micro-silica and nano-silica on durability of mortar.” Constr. Build. Mater. 157 (Dec): 337–347. https://doi.org/10.1016/j.conbuildmat.2017.09.105.
Ling, S. K., and A. K. H. Kwan. 2016. “Adding limestone fines as cementitious paste replacement to lower carbon footprint of SCC.” Constr. Build. Mater. 111 (May): 326–336. https://doi.org/10.1016/j.conbuildmat.2016.02.072.
Liu, Q., T. Tong, S. Liu, D. Yang, and Q. Yu. 2014. “Investigation of using hybrid recycled powder from demolished concrete solids and clay bricks as a pozzolanic supplement for cement.” Constr. Build. Mater. 73 (Dec): 754–763. https://doi.org/10.1016/j.conbuildmat.2014.09.066.
National Development and Reform Commission of China. 2014. China annual report of comprehensive utilization of resources. [In Chinese.] Beijing: National Development and Reform Commission of China.
Okamura, H., and M. Ouchi. 2003. “Self-compacting concrete.” J. Adv. Concr. Technol. 1 (1): 5–15. https://doi.org/10.3151/jact.1.5.
Poppe, A. M., and G. de Schutter. 2005. “Cement hydration in the presence of high filler contents.” Cem. Concr. Res. 35 (12): 2290–2299. https://doi.org/10.1016/j.cemconres.2005.03.008.
Powers, T. C. 1968. The properties of fresh concrete, 533–652. New York: Wiley.
Schneider, M., M. Romer, M. Tschudin, and H. Bolio. 2011. “Sustainable cement production—Present and future.” Cem. Concr. Res. 41 (7): 642–650. https://doi.org/10.1016/j.cemconres.2011.03.019.
Snelson, D. G., and J. M. Kinuthia. 2010. “Characterisation of an unprocessed landfill ash for application in concrete.” J. Environ. Manage. 91 (11): 2117–2125. https://doi.org/10.1016/j.jenvman.2010.04.015.
Soroka, I., and N. Setter. 1977. “The effect of fillers on strength of cement mortars.” Cem. Concr. Res. 7 (4): 449–456. https://doi.org/10.1016/0008-8846(77)90073-4.
Soto-Pérez, L., and S. Hwang. 2016. “Mix design and pollution control potential of pervious concrete with non-compliant waste fly ash.” J. Environ. Manage. 176 (Jul): 112–118. https://doi.org/10.1016/j.jenvman.2016.03.014.
Standardization Administration of China. 2007. Common portland cement. [In Chinese.] GB 175. Beijing: Standardization Administration of China.
Taha, Y., M. Benzaazoua, M. Edahbi, M. Mansori, and R. Hakkou. 2018. “Leaching and geochemical behavior of fired bricks containing coal wastes.” J. Environ. Manage. 209 (Mar): 227–235. https://doi.org/10.1016/j.jenvman.2017.12.060.
Turanli, L., F. Bektas, and P. J. M. Monteiro. 2003. “Use of ground clay brick as a pozzolanic material to reduce the alkali–silica reaction.” Cem. Concr. Res. 33 (10): 1539–1542. https://doi.org/10.1016/S0008-8846(03)00101-7.
Uddin, M. T., A. H. Mahmood, M. R. I. Kamal, S. M. Yashin, and Z. U. A. Zihan. 2017. “Effects of maximum size of brick aggregate on properties of concrete.” Constr. Build. Mater. 134 (Mar): 713–726. https://doi.org/10.1016/j.conbuildmat.2016.12.164.
Xiao, J. Z. 2008. Recycled concrete, 194. [In Chinese.] Beijing: China Architecture & Building Press.
Yan, B., L. Huang, L. Yan, C. Gao, and B. Kasal. 2017. “Behavior of flax FRP tube encased recycled aggregate concrete with clay brick aggregate.” Constr. Build. Mater. 136 (Apr): 265–276. https://doi.org/10.1016/j.conbuildmat.2017.01.046.
Zhang, Z., B. Zhang, and P. Yan. 2016. “Comparative study of effect of raw and densified silica fume in the paste, mortar and concrete.” Constr. Build. Mater. 105 (Feb): 82–93. https://doi.org/10.1016/j.conbuildmat.2015.12.045.
Zhou, Y., J. Hu, M. Li, L. Sui, and F. Xing. 2016. “FRP-confined recycled coarse aggregate concrete: Experimental investigation and model comparison.” Polymers 8 (10): 375. https://doi.org/10.3390/polym8100375.
Zhu, P., X. Mao, W. Qu, Z. Li, and Z. J. Ma. 2016. “Investigation of using recycled powder from waste of clay bricks and cement solids in reactive powder concrete.” Constr. Build. Mater. 113 (Jun): 246–254. https://doi.org/10.1016/j.conbuildmat.2016.03.040.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 19, 2018
Accepted: Feb 12, 2019
Published online: May 7, 2019
Published in print: Jul 1, 2019
Discussion open until: Oct 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.