Strength and Durability Performance of Fly Ash–Based Process-Modified Geopolymer Concrete
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 9
Abstract
Most recent research has focused on the mechanical strength and durability of geopolymer concrete with heat activation (at different temperatures) and has indicated a limitation for its application in precast industries only. This limitation can be overcome by changing when the ingredients for geopolymer concrete are mixed so that curing can be made at ambient temperature. With this process modification (heat activation of fly ash and alkaline fluid), the modified geopolymer concrete shows a significant enhancement in mechanical strength (compressive, split tensile, flexural, and bond strength) and durability (water absorption, acid attack resistance, and rapid chloride permeability test) compared with conventional geopolymer concrete (heat activation after casting) and the control concrete. The microstructural properties analyzed through a field emission scanning electron microscope (FESEM) with energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) techniques show a better interaction of fly ash and activator solution at early ages for such process-modified geopolymer concrete. This accelerates the formation of a crystalline phase from the amorphous phase of fly ash.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the technical and financial support provided by the Department of Civil Engineering, Jadavpur University, and National Institute of Technology Meghalaya.
References
Adak, D., and S. Mandal. 2015. “Study on the modified process for the development of fly ash based geopolymer mortar cured at ambient temperature.” Indian Concr. J. 89 (1): 31–40.
Adak, D., M. Sarkar, and S. Mandal. 2014. “Effect of nano-silica on strength and durability of fly ash based geopolymer mortar.” Constr. Build. Mater. 70 (1): 453–459. https://doi.org/10.1016/j.conbuildmat.2014.07.093.
Adak, D., M. Sarkar, and S. Mandal. 2017. “Structural performance of nano-silica modified fly-ash based geopolymer concrete.” Constr. Build. Mater. 135 (1): 430–439. https://doi.org/10.1016/j.conbuildmat.2016.12.111.
ASTM. 2002. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2012. Test method for electrical indication of concrete ability to resist chloride ion penetration. ASTM C1202. West Conshohocken, PA: ASTM.
Bakharev, T. 2005. “Durability of geopolymer materials in sodium and magnesium sulphate solutions.” Cem. Concr. Res. 35 (6): 1233–1246. https://doi.org/10.1016/j.cemconres.2004.09.002.
Barbosa, V., K. MacKenzie, and C. Thaumaturgo. 2000. “Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: Sodium polysialate polymer.” Int. J. Inorg. Mater. 2 (4): 309–317. https://doi.org/10.1016/S1466-6049(00)00041-6.
BIS (Bureau of Indian Standard). 1999. Methods of tests for strength of concrete. IS 516. New Delhi, India: BIS.
BIS (Bureau of Indian Standard). 2004. Methods of sampling and analysis of concrete. IS 1199. New Delhi, India: BIS.
BIS (Bureau of Indian Standard). 2007. Method of testing bond in reinforced concrete. IS 2770 (Part 1). New Delhi, India: BIS.
BIS (Bureau of Indian Standard). 2008. Specification for concrete slump test apparatus. IS 7320. New Delhi, India: BIS.
Chang, E. H. 2009. “Shear and bond behaviour of reinforced fly ash-based geopolymer concrete beams.” Ph.D. thesis, Faculty of Engineering, Curtin Univ.
Chithra, S., K. Senthil, and K. Chinnaraju. 2016. “The effect of colloidal nano-silica on workability, mechanical and durability properties of high performance concrete with copper slag as partial fine aggregate.” Constr. Build. Mater. 113 (1): 794–804. https://doi.org/10.1016/j.conbuildmat.2016.03.119.
Clarke, L. B. 1993. “Utilization options for coal use residues: An international overview.” In Proc., 10th Int. Ash Use Symp., 66-1–66-14. Orlando, FL: ACAA.
Deb, P. S., P. K. Sarker, and S. Barbhuiya. 2015. “Effects of nano-silica on the strength development of geopolymer cured at room temperature.” Constr. Build. Mater. 101 (1): 675–683. https://doi.org/10.1016/j.conbuildmat.2015.10.044.
Heidrich, C., F. H. Joachim, and W. Anne. 2013. “Coal combustion products: A global perspective.” In Proc., 2013 World of Coal Ash (WOCA). Port Kembla, Australia: Ash Development Association of Australia.
Kalinkin, A. M., S. Kumar, B. I. Gurevich, T. C. Alex, E. V. Kalinkina, V. V. Tyukavkina, V. T. Kalinnikov, and R. Kumar. 2012. “Geopolymerization behavior of Cu–Ni slag mechanically activated in air and in atmosphere.” Int. J. Miner. Process. 112 (1): 101–106. https://doi.org/10.1016/j.minpro.2012.05.001.
Klabprasit, T., C. Jaturapitakkul, W. Chalee, P. Chindaprasirt, and S. Songpiriyakij. 2008. “Influence of Si/Al ratio on compressive strength of rice husk–bark ashes and fly ash–based geopolymer paste.” In Proc., 3rd ACF Int. Conf. on ACF/VCA 2008, 151–157. Hanoi, Vietnam: Vietnam Institute For Building Materials.
Kockal, N., O. Beycan, and N. Gulmez. 2017. “Physical and mechanical properties of silica fume and calcium hydroxide based geopolymers.” Acta Phys. Pol. A 131 (3): 530–534. https://doi.org/10.12693/APhysPolA.131.530.
Kumar, S., and R. Kumar. 2011. “Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer.” Ceram. Int. 37 (2): 533–541. https://doi.org/10.1016/j.ceramint.2010.09.038.
Lee, W. K. W., and J. S. J. Van Deventer. 2004. “The interface between natural siliceous aggregates and geopolymers.” Cem. Concr. Res. 34 (2): 195–206. https://doi.org/10.1016/S0008-8846(03)00250-3.
Malhotra, V. M. 2004. “Role of supplementary cementing materials and super-plasticizers in reducing greenhouse gas emissions.” In Proc., ICFRC Int. Conf. on Fiber Composites, High-Performance Concrete, and Smart Materials, 489–499. Chennai, India: Indian Institute of Technology Madras.
Manz, O. E. 1993. “Worldwide production of coal ash and utilization in concrete and other products.” In Proc., 10th Int. on Ash Use Symp., 64-1–64-12. Orlando, FL: American Coal Ash Association.
Mehta, A., and R. Siddique. 2017. “Properties of low-calcium fly ash based geopolymer concrete incorporating OPC as partial replacement of fly ash.” Constr. Build. Mater. 150 (1): 792–807. https://doi.org/10.1016/j.conbuildmat.2017.06.067.
Okoye, F. N., J. Durgaprasad, and N. B. Singh. 2016. “Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete.” Ceram. Int. 42 (2): 3000–3006. https://doi.org/10.1016/j.ceramint.2015.10.084.
Palomo, A., M. W. Grutzeck, and M. T. Blanco. 1999. “Alkali-activated fly ashes: A cement for the future.” Cem. Concr. Res. 29 (8): 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9.
Panias, D., I. P. Giannopoulou, and T. Perraki. 2007. “Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers.” Colloids Surf. A 301 (1–3): 246–254. https://doi.org/10.1016/j.colsurfa.2006.12.064.
Phoo-ngernkham, T., P. Chindaprasirt, V. Sata, and S. Hatanaka. 2014. “The effect of adding nano- and nano- on properties of high calcium fly ash geopolymer cured at ambient temperature.” Mater. Des. 55 (1): 58–65. https://doi.org/10.1016/j.matdes.2013.09.049.
Ramlochan, T., P. Zacarias, M. D. A. Thoas, and R. D. Hooton. 2003. “The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature. Part I: Expansive behaviour.” Cem. Concr. Res. 33 (6): 807–814. https://doi.org/10.1016/S0008-8846(02)01066-9.
Rangan, B. V. 2008. “Mix design and production of fly ash based geopolymer concrete.” Indian Concr. J. 82 (1): 7–15.
Rattanasak, U., and P. Chindaprasirt. 2009. “Influence of NaOH solution on the synthesis of fly ash geopolymer.” Miner. Eng. 22 (12): 1073–1078. https://doi.org/10.1016/j.mineng.2009.03.022.
Rattanasak, U., K. Pankhet, and P. Chindaprasirt. 2011. “Effect of chemical admixtures on properties of high-calcium fly ash geopolymer.” Int. J. Miner. Metall. Mater. 18 (3): 364–369. https://doi.org/10.1007/s12613-011-0448-3.
Sarker, P. K., A. Grigg, and E. H. Chang. 2007. “Bond strength of geopolymer concrete with reinforcing steel.” In Proc., Recent Development in Structural Engineering, Mechanics and Computation, edited by A. Zingoni, 1315–1320. Rotterdam, Netherlands: Millpress.
Schmucker, M., and K. J. D. MacKenzie. 2004. “Microstructure of sodium polysialatesiloxo geopolymer.” Ceram. Int. 31 (1): 433–437.
Silva, P. D., K. Sagoe-Crenstil, and V. Sirivivatnanon. 2007. “Kinetics of geopolymerization: Role of and .” Cem. Concr. Res. 37 (4): 512–518. https://doi.org/10.1016/j.cemconres.2007.01.003.
Sofi, M., J. S. J. van Deventer, P. A. Mendis, and G. C. Lukey. 2007. “Bond performance of reinforcing bars in inorganic polymer concrete (IPC).” J. Mater. Sci. 42 (9): 3107–3116. https://doi.org/10.1007/s10853-006-0534-5.
Somna, K., C. Jaturapitakkul, and P. Kajitvichyanukul. 2011. “NaOH-activated ground fly ash geopolymer cured at ambient temperature.” Fuel 90 (6): 2118–2124. https://doi.org/10.1016/j.fuel.2011.01.018.
Sumesh, M., U. J. Alengaram, M. Z. Jumaat, K. H. Mo, and M. F. Alnahhal. 2017. “Incorporation of nano-materials in cement composite and geopolymer based paste and mortar—A review.” Constr. Build. Mater. 148 (1): 62–84. https://doi.org/10.1016/j.conbuildmat.2017.04.206.
Temuujin, J., R. P. Williams, and A. V. Riessen. 2009. “Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature.” J. Mater. Process. Technol. 209 (12–13): 5276–5280. https://doi.org/10.1016/j.jmatprotec.2009.03.016.
Xie, T., and T. Ozbakkaloglu. 2015. “Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature.” Ceram. Int. 41 (4): 5945–5958. https://doi.org/10.1016/j.ceramint.2015.01.031.
Zain, M. F. M., H. B. Mahmud, and A. Ilham. 2002. “Prediction of splitting tensile strength of high performance concrete.” Cem. Concr. Res. 32 (8): 1251–1258. https://doi.org/10.1016/S0008-8846(02)00768-8.
Zhang, Y. S., W. Sun, and Z. Li. 2005. “Hydration process of interfacial transition in potassium polysialate (K-PSDS) geopolymer concrete.” Mag. Concr. Res. 57 (1): 33–38. https://doi.org/10.1680/macr.2005.57.1.33.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 19, 2017
Accepted: Feb 12, 2019
Published online: Jun 17, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.