Influence of Temperature and Duration of Thermal Treatment on Properties of Excavated Soil as Fine Aggregate in Cement Mortar
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 8
Abstract
In the interest of utilizing high-plasticity excavation soil as a replacement for fine aggregate in cement mortar, a study on the thermal treatment of soils containing 25% and 40% clay fractions was carried out. A range of tests including thermogravimetric analysis (TGA) and X-ray diffraction (XRD) were conducted to examine the transformation of fines () in soil at temperatures ranging from 200°C to 1,000°C. Thermally treated soils were used as fine aggregate in cement mortar, and properties such as water demand, dry density, compressive strength, and drying shrinkage were studied. The experiments were designed with the parameters treatment temperature and duration using central composite design of response surface methodology. From the test results, it was concluded that thermal treatment helps in transforming clayey soil, even high-plasticity soil, to be used as a suitable fine aggregate material in cement mortar. However, the properties of thermally treated soil highly depend on the clay mineralogy present in it.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. 2015. Standard test method for flow of hydraulic cement mortar. ASTM C1437. West Conshohocken, PA: ASTM.
ASTM. 2017a. Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487. West Conshohocken, PA: ASTM.
ASTM. 2017b. Standard test method for bulk density (“unit weight”) and voids in aggregate. ASTM C29. West Conshohocken, PA: ASTM.
ASTM. 2017c. Standard test method for particle-size distribution (gradation) of fine-grained soils using the sedimentation (hydrometer) analysis. ASTM D7928. West Conshohocken, PA: ASTM.
Bhatnagar, J. M., and R. K. Goel. 2002. “Thermal changes in clay products from alluvial deposits of the Indo-Gangetic plains.” Constr. Build. Mater. 16 (2): 113–122. https://doi.org/10.1016/S0950-0618(01)00031-9.
BIS (Bureau of Indian Standards). 2013. Ordinary portland cement, 53-grade: Specification. IS 12269. New Delhi, India: BIS.
Brooks, R., F. F. Udoeyo, and K. V. Takkalapelli. 2011. “Geotechnical properties of problem soils stabilized with fly ash and limestone dust in Philadelphia.” J. Mater. Civ. Eng. 23 (5): 711–716. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000214.
Cepuritis, R., and E. Mørtsell. 2016. “Possibilities of improving crushed sand performance in fresh concrete by washing: A case study.” Mater. Struct. 49 (12): 5131–5146. https://doi.org/10.1617/s11527-016-0849-x.
Couvidat, J., M. Benzaazoua, V. Chatain, A. Bouamrane, and H. Bouzahzah. 2016. “Feasibility of the reuse of total and processed contaminated marine sediments as fine aggregates in cemented mortars.” Constr. Build. Mater. 112 (Jun): 892–902. https://doi.org/10.1016/j.conbuildmat.2016.02.186.
da Rocha, C. G., A. Passuello, N. C. Consoli, R. A. Quiñónez Samaniego, and N. M. Kanazawa. 2016. “Life cycle assessment for soil stabilization dosages: A study for the Paraguayan Chaco.” J. Clean. Prod. 139 (Dec): 309–318. https://doi.org/10.1016/j.jclepro.2016.07.219.
EEP (Energy and Environmental Profile). 2013. “Energy and environmental profile of the U.S. mining industry.” Accessed March 4, 2018. https://www.energy.gov/sites/prod/files/2013/11/f4/stone.pdf.
Egan, G., A. Kumar, N. Neithalath, and G. Sant. 2017. “Re-examining the influence of the inclusion characteristics on the drying shrinkage of cementitious composites.” Constr. Build. Mater. 146 (Aug): 713–722. https://doi.org/10.1016/j.conbuildmat.2017.04.048.
Eid, J. 2017. “New construction material based on raw earth: Cracking mechanisms, corrosion phenomena and physico-chemical interactions.” Eur. J. Environ. Civ. Eng. 22 (12): 1–16. https://doi.org/10.1080/19648189.2017.1373707.
Fernandez, R., F. Martirena, and K. L. Scrivener. 2011. “The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite.” Cem. Concr. Res. 41 (1): 113–122. https://doi.org/10.1016/j.cemconres.2010.09.013.
ICSD. 2009. Inorganic crystal structure database. Germany: FIZ Karlsruhe.
Joshi, R. C., G. Achari, D. Horsefield, and T. S. Nagaraj. 1994. “Effect of heat treatment on strength of clays.” Appl. Clay Sci. 120 (6): 1080–1088. https://doi.org/10.1016/j.clay.2012.09.010.
Khouadjia, M. L. K., B. Mezghiche, and M. Drissi. 2015. “Experimental evaluation of workability and compressive strength of concrete with several local sand and mineral additions.” Constr. Build. Mater. 98 (Nov): 194–203. https://doi.org/10.1016/j.conbuildmat.2015.08.081.
Landfield, A. H., and V. Karra. 2000. “Life cycle assessment of a rock crusher.” Resour. Conserv. Recycl. 28 (3–4): 207–217. https://doi.org/10.1016/S0921-3449(99)00045-2.
Litvinov, I. M. 1960. Stabilization of settling and weak clayey soils by thermal treatment.. Washington, DC: National Research Council.
Montgomery, C. D. 2012. Design and analysis of experiments. 9th ed. New York: Wiley.
Ozer-Erdogan, P., H. M. Basar, I. Erden, and L. Tolun. 2016. “Beneficial use of marine dredged materials as a fine aggregate in ready-mixed concrete: Turkey example.” Constr. Build. Mater. 124 (Oct): 690–704. https://doi.org/10.1016/j.conbuildmat.2016.07.144.
Priyadharshini, P., K. Ramamurthy, and R. G. Robinson. 2018a. “Reuse potential of stabilized excavation soil as fine aggregate in cement mortar.” Constr. Build. Mater., 192 (Dec): 141–152. https://doi.org/10.1016/j.conbuildmat.2018.10.141.
Priyadharshini, P., K. Ramamurthy, and R. G. Robinson. 2018b. “Sustainable reuse of excavation soil in cementitious composites.” J. Clean. Prod. 176 (Mar): 999–1011. https://doi.org/10.1016/j.jclepro.2017.11.256.
Purushothaman, R., R. R. Amirthavalli, and L. Karan. 2015. “Influence of treatment methods on the strength and performance characteristics of recycled aggregate concrete.” J. Mater. Civ. Eng., 27 (5): 04014168. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001128.
Reddy, B. V. V., and K. S. Jagadish. 2003. “Embodied energy of common and alternative building materials and technologies.” Energy Build. 35 (2): 129–137. https://doi.org/10.1016/S0378-7788(01)00141-4.
Sannier, L., D. Levacher, and M. Jourdan. 2009. “Economical approach and validation of treatment methods using binders of contaminated marine sediments.” Revue Paralia 2: s2.17–s2.32. https://doi.org/10.5150/revue-paralia.2009.s02.
Sarikaya, Y., M. Onal, B. Baran, and T. Alemdaroglu. 2000. “The effect of thermal treatment on some of the physicochemical properties of a bentonite.” Clay. Clay. Miner. 48 (5): 557–562. https://doi.org/10.1346/CCMN.2000.0480508.
Wang, M. C., J. M. Benway, and A. M. Arayssi. 1990. The effect of heating on engineering properties of clays. West Conshohocken, PA: ASTM.
Wang, M. C., M. Jao, and M. S. Ghazal. 2008. “Heating effect on swelling behaviour of expansive soils.” Geomechan. Geoengin. 3 (2): 121–127. https://doi.org/10.1080/17486020802069067.
Warshaw, C. M., P. E. Rosenberg, and R. Roy. 1960. “Changes effected in layer silicates by heating below 550°C.” Clay Miner. Bull. 4 (23): 113–126. https://doi.org/10.1180/claymin.1960.004.23.01.
Yilmaz, G. 2003. “Temperature effects and shrinkage properties on clays.” Am. Ceram. Soc. Bull. 82 (12): 9601–9605.
Zhang, M. H., and O. E. Gjørv. 1990. “Pozzolanic reactivity of lightweight aggregates.” Cem. Concr. Res. 20 (6): 884–890. https://doi.org/10.1016/0008-8846(90)90050-8.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 18, 2018
Accepted: Jan 15, 2019
Published online: May 20, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 20, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.