Hysteresis and Dynamic Response Features of Concrete Exposed to Repeated Multilevel Compressive Loading
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 6
Abstract
Repeated loading can produce serious hazards to concrete constructions. In this work, hysteresis and dynamic response characteristics of concrete subjected to repeated multilevel compressive loading are investigated through laboratory tests. The influence of maximum and minimum load levels on hysteresis time and dynamic response ratio (DRR) are studied based on the laboratory test results. It is concluded that the maximum load level has a more pronounced effect on DRR and hysteresis time than the minimum load level. During the first repeated loading stage, the hysteresis time linearly increases with the maximum load level, whereas DRR shows the opposite trend. The evolution of DRR and hysteresis time of lateral strain can be subdivided into four phases, which is consistent with the trend of P-wave speed and cumulative acoustic emission (AE) counts. Hysteresis time and DRR can be used as the damage variables during the compressive repeated loading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support from China Scholarship Council (CSC) for the first author’s study and living in Germany is gratefully acknowledged. The authors also wish to express the gratitude to the assistance from Mr. Münzberger, Mr. Weichmann and Mrs. Tauch during the laboratory testing in TU Bergakademie Freiberg.
References
Bagde, M. N., and V. Petroš. 2005. “Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading.” Int. J. Rock Mech. Min. Sci. 42 (2): 237–250. https://doi.org/10.1016/j.ijrmms.2004.08.008.
Cai, Y., Y. Chen, Z. Cao, and C. Ren. 2018. “A combined method to predict the long-term settlements of roads on soft soil under cyclic traffic loadings.” Acta Geotech. 13 (5): 1215–1226.
Cerfontaine, B., and F. Collin. 2018. “Cyclic and fatigue behaviour of rock materials: review, interpretation and research perspectives.” Rock Mech. Rock Eng. 51 (2): 391–414. https://doi.org/10.1007/s00603-017-1337-5.
Chen, X., Y. Huang, C. Chen, J. Lu, and X. Fan. 2017. “Experimental study and analytical modeling on hysteresis behavior of plain concrete in uniaxial cyclic tension.” Int. J. Fatigue 96: 261–269. https://doi.org/10.1016/j.ijfatigue.2016.12.002.
Dowell, R. K., F. Seible, and E. L. Wilson. 1998. “Pivot hysteresis model for reinforced concrete members.” ACI Struct. J. 95 (5): 607–617.
Fan, J., J. Chen, D. Jiang, A. Chemenda, J. Chen, and J. Ambre. 2017. “Discontinuous cyclic loading tests of salt with acoustic emission monitoring.” Int. J. Fatigue 94: 140–144. https://doi.org/10.1016/j.ijfatigue.2016.09.016.
Feng, Y., X. Chi, W. Wang, J. Chen, and X. Yin. 2008. “Fast computing for LURR of earthquake prediction.” Pure Appl. Geophys. 165 (3–4): 749–759. https://doi.org/10.1007/s00024-008-0313-0.
Ghuzlan, K. A. 2001. “Fatigue damage analysis in asphalt concrete mixtures based upon dissipated energy concept.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Illinois.
Ghuzlan, K. A., and S. H. Carpenter. 2006. “Fatigue damage analysis in asphalt concrete mixtures using the dissipated energy approach.” Can. J. Civ. Eng. 33 (7): 890–901. https://doi.org/10.1139/l06-032.
Habel, K., and P. Gauvreau. 2008. “Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading.” Cem. Concr. Compos. 30 (10): 938–946. https://doi.org/10.1016/j.cemconcomp.2008.09.001.
Idriss, I. M., Y. Moriwaki, S. G. Wright, E. H. Doyle, and R. S. Ladd. 1980. “Behavior of normally consolidated clay under simulated earthquake and ocean wave loading conditions.” In Proc., Int. Symp. on Soils Under Cyclic and Transient Loading, 437–445. Rotterdam, Netherlands: Balkema.
Kayyali, O. A. 1989. “Porosity and compressive strength of cement paste in sulphate solution.” Cem. Concr. Res. 19 (3): 423–433. https://doi.org/10.1016/0008-8846(89)90031-8.
Lee, M. K., and B. I. G. Barr. 2004. “An overview of the fatigue behaviour of plain and fibre reinforced concrete.” Cem. Concr. Compos. 26 (4): 299–305. https://doi.org/10.1016/S0958-9465(02)00139-7.
Lei, D., P. Zhang, J. He, P. Bai, and F. Zhu. 2017. “Fatigue life prediction method of concrete based on energy dissipation.” Constr. Build. Mater. 145: 419–425. https://doi.org/10.1016/j.conbuildmat.2017.04.030.
Liu, E., and S. He. 2012. “Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions.” Eng. Geol. 125: 81–91. https://doi.org/10.1016/j.enggeo.2011.11.007.
Love, A. E. H. 1906. A treatise on the mathematical theory of elasticity. New York: Dover.
Maxwell, J. C. 1865. “A dynamical theory of the electromagnetic field.” Philos. Trans. R. Soc. London 155 (2): 459–512. https://doi.org/10.1098/rstl.1865.0008.
Mayergoyz, I. D. 2003. “Mathematical models of hysteresis.” IEEE Trans. Magn. 22 (5): 603–608. https://doi.org/10.1109/TMAG.1986.1064347.
Mehta, P. K., and P. J. M. Monteiro. 2006. Concrete: Microstructure, properties, and materials. New York: McGraw-Hill.
Ohtsu, M., and H. Watanabe. 2001. “Quantitative damage estimation of concrete by acoustic emission.” Constr. Build. Mater. 15 (5–6): 217–224. https://doi.org/10.1016/S0950-0618(00)00071-4.
Rao, M. V. M. S., and Y. V. Ramana. 1992. “A study of progressive failure of rock under cyclic loading by ultrasonic and AE monitoring techniques.” Rock Mech. Rock Eng. 25 (4): 237–251. https://doi.org/10.1007/BF01041806.
Sengupta, P., and B. Li. 2014. “Hysteresis behavior of reinforced concrete walls.” J. Struct. Eng. 140 (7): 04014030. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000927.
Song, Z., T. Frühwirt, and H. Konietzky. 2018a. “Characteristics of dissipated energy of concrete subjected to cyclic loading.” Constr. Build. Mater. 168: 47–60. https://doi.org/10.1016/j.conbuildmat.2018.02.076.
Song, Z., H. Konietzky, and T. Frühwirt. 2018b. “Hysteresis energy-based failure indicators for concrete and brittle rocks under the condition of fatigue loading.” Int. J. Fatigue 114: 298–310. https://doi.org/10.1016/j.ijfatigue.2018.06.001.
Song, Z., H. Konietzky, and M. Herbst. 2018c. “Bonded-particle model-based simulation of artificial rock subjected to cyclic loading.” Acta Geotech., in press. https://doi.org/10.1007/s11440-018-0723-9.
Vasseva, E. 1993. “Nonlinear dynamic analysis of reinforced concrete frames.” Nat. Hazards 7 (3): 279–290.
Voznesenskii, A. S., M. N. Krasilov, Y. O. Kutkin, M. N. Tavostin, and Y. V. Osipov. 2017. “Features of interrelations between acoustic quality factor and strength of rock salt during fatigue cyclic loadings.” Int. J. Fatigue 97: 70–78. https://doi.org/10.1016/j.ijfatigue.2016.12.027.
Xiao, J.-Q., D.-X. Ding, F.-L. Jiang, and G. Xu. 2010. “Fatigue damage variable and evolution of rock subjected to cyclic loading.” Int. J. Rock Mech. Min. Sci. 47 (3): 461–468. https://doi.org/10.1016/j.ijrmms.2009.11.003.
Xu, J. 2016. Mechanics of fatigue. Beijing: Science Press.
Yin, X. C., et al. 2008. “The newest developments of load-unload response ratio (LURR).” Pure Appl. Geophys. 165 (3–4): 711–722. https://doi.org/10.1007/s00024-008-0314-z.
Yin, X. C., H. Z. Yu, V. Kukshenko, Z. Y. Xu, Z. Wu, M. Li, K. Peng, S. Elizarov, and Q. Li. 2004. “Load-unload response ratio (LURR), Accelerating moment/energy release (AM/ER) and state vector saltation as precursors to failure of rock specimens.” Pure Appl. Geophys. 161 (11–12): 2405–2416.
Zhang, J. H., J. Wang, and L. S. Chai. 2017. “Factors influencing hysteresis characteristics of concrete dam deformation.” Water Sci. Eng. 10 (2): 166–174. https://doi.org/10.1016/j.wse.2017.03.007.
Zhang, L., and J. Zhuang. 2011. “An improved version of the load/unload response ratio method for forecasting strong aftershocks.” Tectonophysics 509 (3–4): 191–197. https://doi.org/10.1016/j.tecto.2011.06.008.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 2, 2018
Accepted: Nov 21, 2018
Published online: Mar 23, 2019
Published in print: Jun 1, 2019
Discussion open until: Aug 23, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.