Assessments of Potential Service Characteristics of Ethanol and Ethanol- Foamed WMA Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 6
Abstract
In the field, the workability and compactability of asphalt mixtures are essential to obtain the desired smoothness and sufficient density of a compacted pavement, especially for the asphalt mixtures prepared at low temperatures. This is mainly because the handling of the asphalt mixture, at a given temperature, is greatly influenced by the viscosity of the asphalt binder. This study evaluated the workability, coatability, and compactability of warm-mix asphalt (WMA) mixtures prepared using foamed asphalt binders incorporating ethanol and sodium bicarbonate () as foaming agents. The service characteristics of foamed asphalt mixtures that were prepared at 80°C and 100°C were compared with those of the control hot-mix asphalt (HMA). PG 58-28 asphalt binder and aggregates from local sources were selected. The control HMA samples were prepared at 155°C and 100°C for the workability and coatability tests and compacted at 145°C and 100°C for the evaluation of the compactability characteristics. It was found that the application of ethanol as a foaming agent has a high potential for improving the mixture coatability, workability, and compactability at low production temperatures. However, the combination of with 1% ethanol was optimum for these foamed WMA mixtures to maintain the coatability and workability of foamed WMA mixtures. Future work using an antistripping additive (nanohydrated lime) is highly recommended to improve the adhesive and cohesive characteristics and to enhance the moisture-damage resistance of foamed WMA mixtures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors greatly appreciated the funding provided by the US National Science Foundation (NSF) through the SusChEM/Collaborative Research program (Award No. 1300286) which aided this study. Any findings and arguments made in this manuscript are the authors’ opinion, and do not principally denote the views of the National Science Foundation. Research Assistantships to Mohd Hasan and Siyu Chen from Michigan Technological University are highly recognized.
References
AASHTO. 2012. Standard method of test for theoretical maximum specific gravity (Gmm) and density of hot mix asphalt (HMA). AASHTO T209. Washington, DC: AASHTO.
Abdi, H., and L. J. Williams. 2010. “Newman-Keuls test and Tukey test.” In Encyclopedia of research design, 1–11. Thousand Oaks, CA: SAGE.
Ali, A., A. Abbas, M. Nazzal, A. Alhasan, A. Roy, and D. Powers. 2014. “Workability evaluation of foamed warm-mix asphalt.” J. Mater. Civ. Eng. 26 (6): 04014011. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000904.
Arega, Z., A. Bhasin, and W. Li. 2015. “Parametric analysis of factors that affect asphalt binder foaming characteristics.” J. Mater. Civ. Eng. 27 (12): 04015052. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001329.
Asphalt Institute. 2000. Superpave mix design (SP-2). 3rd ed. Lexington, KY: Asphalt Institute.
ASTM. 2015a. Standard test method for preparation and determination of the relative density of asphalt mix specimens by means of the superpave gyratory compactor. ASTM D6925. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for relative density (specific gravity) and absorption of coarse aggregate. ASTM C127. West Conshohocken, PA: ASTM.
Bahia, H. U., and A. F. Faheem. 2007. Using the Superpave gyratory compactor to estimate rutting resistance of hot-mix asphalt. Washington, DC: Transportation Research Board.
Bahia, H. U., T. P. Friemel, P. A. Peterson, J. S. Russell, and B. Poehnelt. 1998. “Optimization of constructibility and resistance to traffic: A new design approach for HMA using the Superpave compactor.” J. Assoc. Asphalt Paving Technol. 67: 189–232.
Bonaquist, R. F. 2011. Mix design practices for warm mix asphalt. Washington, DC: Transportation Research Board.
Diab, A., Z. You, R. Ghabchi, and M. Zaman. 2015. “Effects of regular-sized and nanosized hydrated lime on binder rheology and surface free energy of adhesion of foamed warm mix asphalt.” J. Mater. Civ. Eng. 27 (9): 04014254. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001222.
Diab, A., Z. P. You, and H. N. Wang. 2013. “Using modified creep and recovery tests to evaluate the foam-based warm mix asphalt contained nano hydrated lime.” In Advanced materials research, 90–96. Zürich, Switzerland: Trans Tech.
Geng, H., C. S. Clopotel, and H. U. Bahia. 2013. “Effects of high modulus asphalt binders on performance of typical asphalt pavement structures.” Constr. Build. Mater. 44: 207–213. https://doi.org/10.1016/j.conbuildmat.2013.03.035.
Kandhal, P. S., K. Y. Foo, and R. B. Mallick. 1998. A critical review of VMA requirements in Superpave. Auburn, AL: National Center for Asphalt Technology.
Mahmoud, A. F. F., and H. Bahia. 2004. Using the gyratory compactor to measure mechanical stability of asphalt mixtures. Madison, WI: Univ. of Wisconsin–Madison.
Mohd Hasan, M. R., S. W. Goh, and Z. You. 2013. “Comparative study on the properties of WMA mixture using foamed admixture and free water system.” Constr. Build. Mater. 48: 45–50. https://doi.org/10.1016/j.conbuildmat.2013.06.028.
Mohd Hasan, M. R., and Z. You. 2015. “Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis.” Constr. Build. Mater. 93: 1117–1124. https://doi.org/10.1016/j.conbuildmat.2015.05.029.
Mohd Hasan, M. R., and Z. You. 2016. “Ethanol based foamed asphalt as potential alternative for low emission asphalt technology.” J. Traffic Transp. Eng. 3 (2): 116–126. https://doi.org/10.1016/j.jtte.2016.03.001.
Mohd Hasan, M. R., Z. You, and X. Yang. 2017a. “A comprehensive review of theory, development, and implementation of warm mix asphalt using foaming techniques.” Constr. Build. Mater. 152: 115–133. https://doi.org/10.1016/j.conbuildmat.2017.06.135.
Mohd Hasan, M. R., Z. You, X. Yang, and P. A. Heiden. 2017b. “Quantification of physicochemical properties, activation energy, and temperature susceptibility of foamed asphalt binders.” Constr. Build. Mater. 153: 557–568. https://doi.org/10.1016/j.conbuildmat.2017.07.123.
Newcomb, D. E., E. Arambula, F. Yin, J. Zhang, A. Bhasin, W. Li, and Z. Arega. 2015. Properties of foamed asphalt for warm mix asphalt applications. Washington, DC: Transportation Research Board.
Ozturk, H. I., and M. E. Kutay. 2014. “Effect of foamed binder characteristics on warm mix asphalt (WMA) performance.” In Proc., Transportation Research Board 93rd Annual Meeting. Washington, DC: Transportation Research Board.
Pine, W. 2004. The Bailey method: Achieving volumetrics and HMA compactability. Indianapolis, IN: Heritage Research Group.
Sanchez-Alonso, E., A. Vega-Zamanillo, D. Castro-Fresno, and M. DelRio-Prat. 2011. “Evaluation of compactability and mechanical properties of bituminous mixes with warm additives.” Constr. Build. Mater. 25 (5): 2304–2311. https://doi.org/10.1016/j.conbuildmat.2010.11.024.
Velasquez, R., G. Cuciniello, D. Swiertz, R. Bonaquist, and H. Bahia. 2012. “Methods to evaluate aggregate coating for asphalt mixtures produced at WMA temperatures.” In Proc., 57th Annual Conf. of the Canadian Technical Asphalt Association (CTAA). Victoria, BC: Canadian Technical Asphalt Association.
Yin, F., E. Arambula, D. Newcomb, and A. Bhasin. 2014. “Workability and coatability of foamed warm-mix asphalt.” Chap. 67 in Asphalt pavements. Boca Raton, FL: CRC Press.
You, Z., D. Porter, X. Yang, and H. Yin. 2017. “Preliminary laboratory evaluation of methanol foamed warm mix asphalt binders and mixtures.” J. Mater. Civ. Eng. 29 (11): 06017017. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002085.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: May 2, 2018
Accepted: Nov 14, 2018
Published online: Mar 29, 2019
Published in print: Jun 1, 2019
Discussion open until: Aug 29, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.