Temperature-Induced Chemical Changes in Soundless Chemical Demolition Agents
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 7
Abstract
This paper explored the relationship between ambient temperature, calcium oxide (CaO) hydration, and calcium carbonate () generation in cold and moderate ambient temperatures (2°C–19°C). A total of 22 samples from 2 commercial soundless chemical demolition agents (SCDAs) were tested in steel pipes. The raw powder and materials resulting from hydration were subjected to X-ray diffraction analysis, derivative thermogravimetric analysis, and thermogravimetry analysis. Raw and hydrated specimens proved chemically distinctive. Experimental results showed that (1) the unconfined portions of hydrated specimens contained more due to carbonation of , and confined portions had higher concentrations; (2) all materials tested at 19°C ambient temperature had concentrations nearly 10% greater than those tested at 2°C; and (3) the higher concentrations formed at 19°C generated 350% greater expansive pressure than did those that formed at 2°C.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The raw and processed data required to reproduce these findings cannot be shared at this time due to technical or time limitations.
Acknowledgments
The authors thank Derek Holmes, lab technician, University College Dublin for his tireless efforts in the lab throughout the research, and C. Aspiotis for his contribution in XRD and TG experiments. This work was supported by Science Foundation Ireland (12/ERC/12534).
References
Aqel, M., and D. K. Panesar. 2018. “Delayed ettringite formation in concrete containing limestone filler.” ACI Mater. J. 115 (4): 565–574.
BASF. 2018. Bristar material safety data sheet. Mississauga, Canada: BASF Canada.
Cohen, M. D. 1983. “Theories of expansion in sulfoaluminate-type expansive cements: Schools of thought.” Cem. Concr. Res. 13 (6): 809–818. https://doi.org/10.1016/0008-8846(83)90082-0.
Cohen, M. D., and C. W. Richards. 1982. “Effects of the particle sizes of expansive clinker on strength-expansion characteristics of type K expansive cements.” Cem. Concr. Res. 12 (6): 717–725. https://doi.org/10.1016/0008-8846(82)90034-5.
De Silva, V. R. S., P. G. Ranjith, M. S. A. Perera, B. Wu, and T. D. Rathnaweera. 2017. “Investigation of the mechanical, microstructural and mineralogical morphology of soundless cracking demolition agents during the hydration process.” Mater. Charact. 130: 9–24. https://doi.org/10.1016/j.matchar.2017.05.004.
De Silva, V. R. S., P. G. Ranjith, M. S. A. Perera, B. Wu, and T. D. Rathnaweera. 2018. “A modified, hydrophobic soundless cracking demolition agent for non-explosive demolition and fracturing applications.” Process Saf. Environ. Prot. 119: 1–13. https://doi.org/10.1016/j.psep.2018.07.010.
Dowding, C. H., and J. F. Labuz. 1982. “Fracturing of rock with expansive cement.” J. Geotech. Eng. 109: 1288–1299.
El-Didamony, H., and M. Y. Haggag. 1978. “Studies on expansive cement II. Hydration kinetics, surface properties and microstructure.” Cem. Concr. Res. 8 (3): 351–358. https://doi.org/10.1016/0008-8846(78)90105-9.
Étkin, M. B., and A. E. Azarkovich. 2006. “Effect of non-explosive splitting compounds and rational work parameters.” Power Technol. Eng. 40 (5): 287–292.
Goto, K., K. Kojima, and K. Watabe. 1988. “The mechanism of expansive pressure and blow-out of static demolition agent.” In Vol. 1 of Proc., 2nd Int. RILEM Symp. on Demolition and Reuse of Concrete and Masonry, 116–125. Tokyo: Nihon Univ.
Harada, T., K. Soeda, T. Idemistzu, and A. Watanabe. 1993. “Characteristics of expansive pressure of an expansive demolition agent and the development of new pressure transducers.” Doboku Gakkai Ronbunshu 478: 91–100.
Hayashi, H., K. Soeda, T. Hida, and M. Kanbayashi. 1993. “Non-explosive demolition agent in Japan.” In Proc., 3rd Int. RILEM Symp., Demolition and Reuse of Concrete and Masonry, edited by E. K. Lauritzen, 231–241. Boca Raton, FL: Chapman & Hall.
Hinze, J., and J. Brown. 1994. “Properties of soundless chemical demolition agents.” J. Constr. Eng. Manage. 120 (4): 816–827. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:4(816).
Huynh, M. P., and D. F. Laefer. 2009. “Expansive cement and soundless chemical demolition agents: State of technology review.” In Proc., 11th Conf. on Science and Technology, 95–104. Ho Chi Minh City, Vietnam: VNU-HCM Press.
Huynh, M. P., D. F. Laefer, J. McGuill, and A. White. 2017. “Temperature-related performance factors for chemical demolition agents.” Int. J. Masonry Res. Innov. 2 (2–3): 220–240. https://doi.org/10.1504/IJMRI.2017.085952.
Kastis, D., G. Kakali, S. Tsivilis, and M. G. Stamatakis. 2006. “Properties and hydration of blended cements with calcareous diatomite.” Cem. Concr. Res. 36 (10): 1821–1826. https://doi.org/10.1016/j.cemconres.2006.05.005.
KMK Regulatory Services. 2016. Safety data sheet: DEXPAN (Non-explosive demolition agent). Sunland Park, NM: Archer Company.
Laefer, D. F., N. Ambrozevitch-Cooper, M. P. Huynh, J. Midgette, S. Ceribasi, and J. Wortman. 2010. “Expansive fracture agent behaviour for concrete cracking.” Mag. Concr. Res. 62 (6): 443–452. https://doi.org/10.1680/macr.2010.62.6.443.
Laefer, D. F., A. S. Natanzi, and S. M. I. Zolanvari. 2018. “Impact of thermal transfer on hydration heat of a soundless chemical demolition agents.” Constr. Build. Mater. 187: 348–359. https://doi.org/10.1016/j.conbuildmat.2018.07.168.
Mather, B. 1970. Expansive cements. Vicksburg, MS: US Army Engineer Waterways Experiment Station.
Mehta, P. K. 1973. “Mechanism of expansion associated with ettringite formation.” Cem. Concr. Res. 3 (1): 1–6. https://doi.org/10.1016/0008-8846(73)90056-2.
Natanzi, A. S., and D. F. Laefer. 2014. “Using chemicals as demolition agents near historic structures.” In Proc., 9th Int. Conf. Structural Analysis of Historical Constructions. Burwood, Australia: International Scientific Committee on the Analysis and Restoration of Structures of Architectural Heritage.
Natanzi, A. S., D. F. Laefer, and L. Connolly. 2016. “Cold and moderate ambient temperatures effects on expansive pressure development in soundless chemical demolition agents.” Constr. Build. Mater. 110: 117–127. https://doi.org/10.1016/j.conbuildmat.2016.02.016.
Nocuń-Wczelik, W., A. Bochenek, and M. Migdâ. 2012. “Calorimetry and other methods in the studies of expansive cement hydrating mixtures.” J. Therm. Anal. Calorim. 109 (2): 529–535. https://doi.org/10.1007/s10973-012-2379-2.
Onoda Cement. 1980. Bristar—Nonexplosive demolition agent. Tokyo: Onoda Cement.
Polivka, M. 1973. “Factors influencing expansion of expansive cement concretes.” ACI Spec. Publ. 38: 239–250.
Shahraki, B. K., B. Mehrabi, K. Gholizadeh, and M. Mohammadinasab. 2011. “Thermal behavior of calcite as an expansive agent.” J. Min. Metall. Sect. B: Metall. 47 (1): 89–97. https://doi.org/10.2298/JMMB1101089S.
Soeda, K., and T. Harada. 1993. “The mechanics of expansive pressure generation with expansive demolition agents.” Conc. Lib. JSCE 466 (19): 89–96.
Soeda, K., T. Hida, H. Hayashi, and M. Kanbayashi. 1992. “The influence of additives on the expansive stress of quick lime.” Gypsum Lime 237: 9–14.
Soeda, K., K. Tsuchiya, M. Matsuhisa, and T. Harada. 1994. “The properties of the expansive stress of non-explosive demolition agent in long period of time.” Gypsum Lime 248: 37–43.
Tang, Y., L. Yuan, J. Xue, and C. Duan. 2017. “Experimental study on fracturing coal seams using CaO demolition materials to improve permeability.” J. Sustainable Mining 16 (2): 47–54. https://doi.org/10.1016/j.jsm.2017.07.002.
Taylor, H. F. W., C. Famy, and K. L. Scrivener. 2001. “Delayed ettringite formation.” Cem. Concr. Res. 31 (5): 683–693. https://doi.org/10.1016/S0008-8846(01)00466-5.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 10, 2018
Accepted: Sep 20, 2018
Published online: Apr 25, 2019
Published in print: Jul 1, 2019
Discussion open until: Sep 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.