Abstract
This paper reports a novel methodology to manufacture geopolymer coarse aggregate (GPA) using low calcium fly ash. The developed methodology is outlined together with a systematic experimental study undertaken to examine a viable manufacturing process for GPA production and the consideration of key mechanical properties and durability characteristics of GPA concrete up to 90 days. GPA with a dry compressive strength in excess of 50 MPa can be manufactured using a solid cylindrical mould with compression applied using a cylindrical piston. The key mechanical properties investigated for GPA concrete demonstrate a good correlation with the compressive strength to conventional crushed aggregate concrete. Concrete with mean compressive strength up to 37 MPa can be produced using the innovative GPA concrete. The GPA concrete demonstrates low water and air permeability indicating that the material is a high-quality concrete with a dense pore structure. Overall, GPA investigated in this research shows potential as a lightweight coarse aggregate in portland cement concrete, with the significant additional benefit of addressing and reducing the environmental impact of fly ash from coal fired power generation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to express their thanks to Polyagg Pty Ltd. for the financial support of this research. Further authors acknowledge the Civil and Infrastructure Engineering laboratory at RMIT University, providing technical and scientific assistance throughout the experimental works.
References
Alexander, M., and S. Mindess. 2010. Aggregates in concrete. Boca Raton, FL: CRC Press.
AS (Australian Standards). 1997. Methods of testing concrete: Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens. AS 1012.17. Syndey, Australia: AS.
AS (Australian Standards). 1998a. Methods of testing concrete: Determination of mass per unit volume of hardened concrete: Water displacement method. AS 1012.12.2. Syndey, Australia: AS.
AS (Australian Standards). 1998b. Supplementary cementitious materials for use with portland and blended cement. Part 1: Fly ash. AS 3582.1. Syndey, Australia: AS.
AS (Australian Standards). 1999. Method of testing concrete, Method 9: Determination of the compressive strength of concrete specimens. AS 1012.9. Syndey, Australia: AS.
AS (Australian Standards). 2000. Methods of testing concrete: Determination of the modulus of rupture. AS 1012.11. Syndey, Australia: AS.
AS (Australian Standards). 2009. Concrete structures. AS 3600. Syndey, Australia: AS.
AS (Australian Standards). 2014. Determination of properties related to the consistency of concrete: Slump test. AS 1012.3.1. Syndey, Australia: AS.
AS (Australian Standards). 2015. Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory. AS 1012.13. Syndey, Australia: AS: 1–13.
ASTM. 2009. Standard test method for pulse velocity through concrete. ASTM C597. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard specification for portland cement. ASTM C150. West Conshohocken, PA: ASTM.
Autoclam Permeability System. 1995. Operating manual. Belfast, UK: Queen’s Univ. of Belfast.
Basheer, L., J. Kropp, and D. J. Cleland. 2001. “Assessment of the durability of concrete from its permeation properties: A review.” Constr. Build. Mater. 15 (2): 93–103. https://doi.org/10.1016/S0950-0618(00)00058-1.
Basheer, P., F. Montgomery, and A. Long. 1995. “Clam’tests for measuring in-situ permeation properties of concrete.” Nondestr.Test. Eval. 12 (1): 53–73. https://doi.org/10.1080/10589759508952835.
Broomfield, J. P. 2006. Corrosion of steel in concrete: Understanding, investigation and repair. Boca Raton, FL: CRC Press.
Brown, B. V. 1993. Aggregates: The greater part of concrete. London: E&FN Spon.
Cement Concrete and Aggregates Australia. 2016. "Aggregates in concrete—Technical note.” Accessed January 12, 2017. http://www.concrete.net.au/iMIS_Prod.
Chindaprasirt, P., and W. Chalee. 2014. “Effect of sodium hydroxide concentration on chloride penetration and steel corrosion of fly ash-based geopolymer concrete under marine site.” Constr. Build. Mater. 63 (1): 303–310. https://doi.org/10.1016/j.conbuildmat.2014.04.010.
Chindaprasirt, P., U. Rattanasak, and S. Taebuanhuad. 2013. “Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer.” Mater. Struct. 46 (3): 375–381. https://doi.org/10.1617/s11527-012-9907-1.
Cwirzen, A., P. Sztermen, and K. Habermehl-Cwirzen. 2014. “Effect of Baltic seawater and binder type on frost durability of concrete.” J. Mater. Civ. Eng. 26 (2): 283–287. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000803.
De Brito, J., A. Pereira, and J. Correia. 2005. “Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates.” Cem. Concr. Compos. 27 (4): 429–433. https://doi.org/10.1016/j.cemconcomp.2004.07.005.
De Silva, P., K. Sagoe-Crenstil, and V. Sirivivatnanon. 2007. “Kinetics of geopolymerization: Role of Al2O3 and SiO2.” Cem. Concr. Res. 37 (4): 512–518. https://doi.org/10.1016/j.cemconres.2007.01.003.
Diaz-Loya, E. I., E. N. Allouche, and S. Vaidya. 2011. “Mechanical properties of fly-ash-based geopolymer concrete.” ACI Mater. J. 108 (3): 300–306.
Duxson, P., A. Fernández-Jiménez, J. Provis, G. Lukey, A. Palomo, and J. van Deventer. 2007. “Geopolymer technology: The current state of the art.” J. Mater. Sci. 42 (9): 2917–2933. https://doi.org/10.1007/s10853-006-0637-z.
Fournier, B., and M.-A. Bérubé. 2000. “Alkali-aggregate reaction in concrete: A review of basic concepts and engineering implications.” Can. J. Civ. Eng. 27 (2): 167–191. https://doi.org/10.1139/l99-072.
Garbacz, A., and E. J. Garboczi. 2003. Ultrasonic evaluation methods applicable to polymer concrete composites. Washington, DC: US Dept. of Commerce, Technology Administration, National Institute of Standards and Technology.
Gluth, G. J. G., C. Lehmann, K. Rübner, and H.-C. Kühne. 2014. “Reaction products and strength development of wastepaper sludge ash and the influence of alkalis.” Cem. Concr. Compos. 45 (2): 82–88. https://doi.org/10.1016/j.cemconcomp.2013.09.009.
Gunasekara, C., D. W. Law, and S. Setunge. 2016. “Long term permeation properties of different fly ash geopolymer concretes.” Constr. Build. Mater. 124: 352–362. https://doi.org/10.1016/j.conbuildmat.2016.07.121.
Hoff, G. 1990. “High-strength lightweight aggregate concrete: Current status and future needs.” In Proc., High-Strength Concrete 2nd Int. Symp., 121–130. Farmington Hills, MI: ACI.
Junaid, M. T., A. Khennane, and O. Kayali. 2015. “Performance of fly ash based geopolymer concrete made using non-pelletized fly ash aggregates after exposure to high temperatures.” Mater. Struct. 48 (10): 3357–3365. https://doi.org/10.1617/s11527-014-0404-6.
Karakurt, C., H. Kurama, and I. B. Topcu. 2010. “Utilization of natural zeolite in aerated concrete production.” Cem. Concr. Compos. 32 (1): 1–8. https://doi.org/10.1016/j.cemconcomp.2009.10.002.
Kayali, O. 2005. “Flashag-new lightweight aggregate for high strength and durable concrete.” In Proc., 2005 World of Coal Ash (WOCA). Lexington, KY: World of Coal Ash.
Khale, D., and R. Chaudhary. 2007. “Mechanism of geopolymerization and factors influencing its development: A review.” J. Mater. Sci. 42 (3): 729–746. https://doi.org/10.1007/s10853-006-0401-4.
Kou, S. C., C. S. Poon, and D. Chan. 2007. “Influence of fly ash as cement replacement on the properties of recycled aggregate concrete.” J. Mater. Civ. Eng. 19 (9): 709–717. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(709).
Liu, M. Y. J., U. J. Alengaram, M. Z. Jumaat, and K. H. Mo. 2014. “Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete.” Energy Build. 72: 238–245. https://doi.org/10.1016/j.enbuild.2013.12.029.
Lura, P., and J. Bisschop. 2004. “On the origin of eigenstresses in lightweight aggregate concrete.” Cem. Concr. Compos. 26 (5): 445–452. https://doi.org/10.1016/S0958-9465(03)00072-6.
Malhotra, V. M. 2008. “Role of fly ash in reducing greenhouse gas emissions during themanufacturing of portland cement clinker.” In Proc., 2nd Int. Conf. on Advances in Concrete Technologies in the Middle East Conf. Research Papers. Farmington Hills, MI: American Concrete Institute.
Neville, A. M. 1996. Properties of concrete. Harlow, UK: Pearson Education Limited.
Olanipekun, E., K. Olusola, and O. Ata. 2006. “A comparative study of concrete properties using coconut shell and palm kernel shell as coarse aggregates.” Build. Environ. 41 (3): 297–301. https://doi.org/10.1016/j.buildenv.2005.01.029.
Otsuki, N., S.-I. Miyazato, and W. Yodsudjai. 2003. “Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete.” J. Mater. Civ. Eng. 15 (5): 443–451. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:5(443).
Provis, J. L. 2014. “Geopolymers and other alkali activated materials: Why, how, and what?” Mater. Struct. 47 (1–2): 11–25. https://doi.org/10.1617/s11527-013-0211-5.
Puertas, F., M. Palacios, H. Manzano, J. Dolado, A. Rico, and J. Rodríguez. 2011. “A model for the CASH gel formed in alkali-activated slag cements.” J. Eur. Ceram. Soc. 31 (12): 2043–2056. https://doi.org/10.1016/j.jeurceramsoc.2011.04.036.
Rao, A., K. N. Jha, and S. Misra. 2007. “Use of aggregates from recycled construction and demolition waste in concrete.” Resour. Conserv. Recycl. 50 (1): 71–81. https://doi.org/10.1016/j.resconrec.2006.05.010.
Scrivener, K. L., A. K. Crumbie, and P. Laugesen. 2004. “The interfacial transition zone (ITZ) between cement paste and aggregate in concrete.” Interface Sci. 12 (4): 411–421. https://doi.org/10.1023/B:INTS.0000042339.92990.4c.
Warner, R. F., B. V. Rangan, A. S. Hall, and K. A. Faulkes. 1998. Reinforced concrete. Boston: Addison Wesley Longman.
Willis, N. C. 2016. Geopolymers and geopolymer aggregates. Geneva: World Intellectual Property Organization, International Bureau.
Yap, S. P., U. J. Alengaram, and M. Z. Jumaat. 2013. “Enhancement of mechanical properties in polypropylene–and nylon–fibre reinforced oil palm shell concrete.” Mater. Des. 49 (1): 1034–1041. https://doi.org/10.1016/j.matdes.2013.02.070.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 15, 2017
Accepted: May 15, 2018
Published online: Aug 30, 2018
Published in print: Nov 1, 2018
Discussion open until: Jan 30, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.