Response of Concrete with Blended Binders and Nanosilica to Freezing–Thawing Cycles and Different Concentrations of Deicing Salts
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 9
Abstract
Concrete deterioration in cold climate regions is a great concern from a durability perspective because of deicing salts and freezing–thawing (F/T) cycles. This study investigates the response, in terms of physicomechanical properties and microstructural features, of concrete made with different types of cement—general use cement and portland limestone cement (PLC)—without or with fly ash and nanosilica to F/T cycles combined with different concentrations of chloride-based deicing salts ( and ). The results reveal that the resistance of concrete exposed to deicing salts is a function of physical penetrability (magnitude of intruding chloride), amount of aluminate in the cement, and content of portlandite available for chemical reactions in the hydrated paste. PLC mixtures exhibit better resistance to deicing salts due to synergistic physical and chemical actions of limestone in the matrix. Fly ash concrete has better performance than the reference concretes, especially the mixture containing 30%. When nanosilica is incorporated in concrete, no features of damage could be captured.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The experiments reported in this paper were conducted in the IKO Construction Materials Testing Facility at the University of Manitoba. This study was financially supported by the Natural Sciences and Engineering Research Council of Canada and the Public Works Department, City of Winnipeg.
References
ASTM. 2011. Standard test method for anions in water by suppressed ion chromatography. ASTM D4327-11. West Conshohocken, PA: ASTM.
ASTM. 2012a. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39-12. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. ASTM C1202-12. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard specification for chemical admixtures for concrete. ASTM C494/C494M-13, West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for fundamental transverse, longitudinal, and torsional resonant frequencies of concrete specimens. ASTM C215-14. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for resistance of concrete to rapid freezing and thawing. ASTM C666/C666M-15, West Conshohocken, PA: ASTM.
Balonis, M., B. Lothenbach, G. L. Saout, and F. P. Glasser. 2010. “Impact of chloride on the mineralogy of hydrated portland cement systems.” Cem. Concr. Res. 40 (7): 1009–1022. https://doi.org/10.1016/j.cemconres.2010.03.002.
Bassuoni, M. T., M. L. Nehdi, and T. R. Greenough. 2006. “Enhancing the reliability of evaluating chloride ingress in concrete using the ASTM C1202 rapid chloride penetrability test.” J. ASTM Int. 3 (3): 13. https://doi.org/10.1520/JAI13403.
City of Toronto. 2016. “Salt management plan.” Accessed May 1, 2017. https://www.toronto.ca/wp-content/uploads/2017/11/9111-Salt-Management-Plan_2016_Summary.pdf.
CSA (Canadian Standards Association). 2013. Cementitious materials for use in concrete. CSA-A3001-13. Mississauga, ON, Canada: CSA.
Federal Highway Administration. 2014. Standard specifications for construction of roads and bridges on Federal Highway projects. Washington, DC: US Dept. of Transportation, Federal Highway Administration.
Galan, I., L. Perron, and F. P. Glasser. 2015. “Impact of chloride-rich environments on cement paste mineralogy.” Cem. Concr. Res. 68: 174–183. https://doi.org/10.1016/j.cemconres.2014.10.017.
Ghazy, A., and M. T. Bassuoni. 2017. “Resistance of concrete to different exposures with chloride-based salts.” Cem. Concr. Res. 101: 144–158. https://doi.org/10.1016/j.cemconres.2017.09.001.
Ghazy, A., M. T. Bassuoni, and A. Shalaby. 2016. “Nano-modified fly ash concrete: A repair option for concrete pavements.” ACI Mater. J. 113 (2): 231–242.
Gon, S., and A. Guerrero. 2003. “Accelerated carbonation of Friedel’s salt in calcium aluminate cement paste.” Cem. Concr. Res. 33 (1): 21–26.
Ipavec, A., T. Vuk, R. Gabrovšek, and V. Kaučič. 2013. “Chloride binding into hydrated blended cements: the influence of limestone and alkalinity.” Cem. Concr. Res. 48: 74–85. https://doi.org/10.1016/j.cemconres.2013.02.010.
Jain, J., J. Olek, A. Janusz, and D. Jozwiak-Niedzwiedzka. 2012. “Effects of deicing salt solutions on physical properties of pavement concretes.” Transp. Res. Rec. 2290: 69–75. https://doi.org/10.3141/2290-09.
Kelting, D. L., and C. L. Laxson. 2010. Review of effects and costs of road de-icing with recommendations for winter road management in the Adirondack Park, 34. Paul Smiths, NY: Adirondack and Watershed Institute.
Litvan, G. G. 1976. “Frost action in cement in the presence of deicers.” Cem. Concr. Res. 6 (3): 351–356. https://doi.org/10.1016/0008-8846(76)90097-1.
Liu, Z., and W. Hansen. 2013. “Freezing characteristics of air-entrained concrete in the presence of deicing salt.” Cem. Concr. Res. 45: 79–90. https://doi.org/10.1016/j.cemconres.2015.03.015.
Lothenbach, B., G. L. Saout, E. Galluci, and K. Scrivener. 2008. “Influence of limestone on the hydration of portland cements.” Cem. Concr. Res. 38 (6): 848–860. https://doi.org/10.1016/j.cemconres.2008.01.002.
Madani, H., A. Bagheri, and T. Parhizkar. 2012. “The pozzolanic reactivity of monodispersed nano-silica hydrosols and their influence on the hydration characteristics of portland cement.” Cem. Concr. Res. 42 (12): 1563–1570. https://doi.org/10.1016/j.cemconres.2012.09.004.
Marchand, J., M. Pigeon, D. Bager, and C. Talbot. 1999. “Influence of chloride solution concentration on deicer salt scaling deterioration of concrete.” ACI Mater. J. 96 (4): 429–435.
Marzouki, A., A. Lecomte, A. Beddey, C. Diliberto, and M. B. Ouezdou. 2013. “The effects of grinding on the properties of portland-limestone cement.” Constr. Build. Mater. 48: 1145–1155. https://doi.org/10.1016/j.conbuildmat.2013.07.053.
Minnesota Snow and Ice Control. 2012. “Field handbook for snowplow operators.” Accessed May 1, 2017. http://www.mnltap.umn.edu/publications/handbooks/documents/snowice.pdf.
NT BUILD. 2011. Chloride migration coefficient from non-steady-state 634 migration experiments, 492. Nordtest, Finland: NT BUILD.
Ontario Provincial Standard Specification. 2014. Ontario provincial standards for roads and public works: Materials and production, 77. ON, Canada: Ontario Provincial Standard.
Penttala, V. 2006. “Surface and internal deterioration of concrete due to saline and non-saline freeze-thaw loads.” Cem. Concr. Res. 36 (5): 921–928. https://doi.org/10.1016/j.cemconres.2005.10.007.
Peterson, K., G. Betancourt, L. Sutter, R. D. Hooton, and D. Johnston. 2013. “Observations of chloride ingress and calcium oxychloride formation in laboratory concrete and mortar at 5°C.” Cem. Concr. Res. 45: 79–90. https://doi.org/10.1016/j.cemconres.2013.01.001.
Powers, T. C. 1975. Freezing effects of concrete. ACI SP-47, 1–11. Farmington Hills, MI: ACI.
Powers, T. C., and R. A. Helmuth. 1953. “Theory of volume changes in hardened portland cement paste during freezing.” Proc. Highway Res. Board 32: 285–297.
Ramezanianpour, A. M., and R. D. Hooton. 2013. “Sulfate resistance of portland-limestone cements in combination with supplementary cementitious materials.” Mater. Struct. 46 (7): 1061–1073. https://doi.org/10.1617/s11527-012-9953-8.
Said, A. M., M. S. Zeidan, M. T. Bassuoni, and Y. Tian. 2012. “Properties of concrete incorporating nano-silica.” Constr. Build. Mater 36: 838–844. https://doi.org/10.1016/j.conbuildmat.2012.06.044.
Sun, Z., and G. W. Scherer. 2010. “Effect of air voids on salt scaling.” Cem. Concr. Res. 40 (2): 260–270. https://doi.org/10.1016/j.cemconres.2009.09.027.
Thomas, M. D. A., K. Cail, B. Blair, A. Delagrave, P. Masson, and K. Kazanis. 2014. “Use of low- portland limestone cement for pavement construction in Canada.” Int. J. Pave. Res. Tech. 3 (5): 228–233.
Tsivilis, S., J. Tsantilas, G. Kakali, E. Chaniotakis, and A. Sakellariou. 2003. “The permeability of portland limestone cement concrete.” Cem. Concr. Res. 33 (9): 1465–1471. https://doi.org/10.1016/S0008-8846(03)00092-9.
Valenza, J. J., and G. W. Scherer. 2006. “Mechanism for salt scaling.” J. Am. Ceram. Soc. 89 (4): 1161–1179. https://doi.org/10.1111/j.1551-2916.2006.00913.x.
Wu, Z., C. Shi, P. Gao, D. Wang, and Z. Cao. 2015. “Effects of deicing salts on the scaling resistance of concrete.” J. Mater. Civ. Eng. 27 (5): 1–11. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001106.
Zadeh, V. Z., and C. P. Bobko. 2013. “Nanoscale mechanical properties of concrete containing blast furnace slag and fly ash before and after thermal damage.” Cem. Concr. Compos. 37: 215–221. https://doi.org/10.1016/j.cemconcomp.2012.09.003.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 25, 2017
Accepted: Jan 23, 2018
Published online: Jun 28, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.