Effect of the SI to AL Ratio of Amorphous Nanoaluminosilicates on the Hydration Reaction of Portland Cement
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 7
Abstract
This study explored the effect of amorphous nanoaluminosilicate, with controlled silicon to aluminum ratio, on the hydration of portland cement. The effect of these nanomaterials on the early hydration reaction of cement was evaluated using isothermal calorimetry. The xerogel samples of the nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR) before and after exposure to simulated cement paste pore solution. The performance of these nanoaluminosilicates was compared against nanosilica and nanoboehmite. The results show that the nanoaluminosilicates affected principally the hydration of the calcium aluminate phase by removing sulfate from the pore solution. The same effect was reported in cement paste samples containing 10 times more concentration of metakaolin. The effect was found to be strongly dependent on the particle size, which was ultimately affected by the silicon to aluminum ratio of the original nanoparticle. Beside sulfate, it was found that the nanoparticles also incorporate alkalis, calcium, and chloride from the pore solution to form calcium aluminosilicate hydrate and hydrated calcium aluminates (AFm) phases.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the fellowship of the National Research Council Research Associateship Program (for project “Comprehension and Development of Nanoadditives to Judicially Improve the Interfacial Region in Concrete and Asphalt”) and the Dwight David Eisenhower Transportation Fellowship Program sponsored by Federal Highway Administration (for project “Study of Seeding Effect of Amorphous Nanoaluminosilicate on Calcium Alumino Silicate Gel Formation”). The authors would like to thank Professor Konstantin Sobolev for his helpful input regarding some of the concepts discussed within this manuscript.
References
Aly, M., M. S. J. Hashmi, A. G. Olabi, M. Messeiry, and A. I. Hussain. 2011. “Effect of nano clay particles on mechanical, thermal and physical behaviors of waste-glass cement mortars.” Mater. Sci. Eng.: A 528 (27): 7991–7998. https://doi.org/10.1016/j.msea.2011.07.058.
Antoni, M., J. Rossen, F. Martirena, and K. Scrivener. 2012. “Cement substitution by a combination of metakaolin and limestone.” Cem. Concr. Res. 42 (12): 1579–1589. https://doi.org/10.1016/j.cemconres.2012.09.006.
Balonis, M. 2010. “The influence of inorganic chemical accelerators and corrosion inhibitors on the mineralogy of hydrated portland cement systems.” Ph.D. thesis, Univ. of Aberdeen.
Benedix, R., F. Dehn, J. Quaas, and M. Orgass. 2000. “Application of titanium dioxide photocatalysis to create self-cleaning building materials.” Lacer 5: 157–168.
Birgisson, B., and M. Dham. 2011. “Optimization of clay addition for the enhancement of pozzolanic reaction in nano-modified cement paste.” In Nanotechnology in civil infrastructure, edited by K. Gopalakrishnan, B. Birgisson, P. Taylor, and N. O. Attoh-Okine, 225–236. Berlin: Springer.
Bullard, J. W., H. M. Jennings, R. A. Livingston, A. Nonat, G. W. Scherer, J. S. Schweitzer, K. L. Scrivener, and J. J. Thomas. 2011. “Mechanisms of cement hydration.” Cem. Concr. Res. 41 (12): 1208–1223. https://doi.org/10.1016/j.cemconres.2010.09.011.
Chang, T. P., J. Y. Shih, K. M. Yang, and T. C. Hsiao. 2007. “Material properties of portland cement paste with nano-montmorillonite.” J. Mater. Sci. 42 (17): 7478–7487. https://doi.org/10.1007/s10853-006-1462-0.
Chen, J., and C. S. Poon. 2009. “Photocatalytic construction and building materials: From fundamentals to applications.” Build. Environ. 44 (9): 1899–1906. https://doi.org/10.1016/j.buildenv.2009.01.002.
Damidot, D., and A. Nonat. 1994. “C3S hydration in diluted and stirred suspensions: (I) Study of the two kinetic steps.” Adv. Cem. Res. 6 (21): 27–35. https://doi.org/10.1680/adcr.1994.6.21.27.
EPA. 1983. Methods for chemical analysis of water and wastes, 1–491. Cincinnati: EPA.
Farzadnia, N., A. A. Abang Ali, R. Demirboga, and M. P. Anwar. 2013. “Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars.” Cem. Concr. Res. 48: 97–104. https://doi.org/10.1016/j.cemconres.2013.03.005.
Fernandez, L., C. Alonso, A. Hidalgo, and C. Andrade. 2005. “The role of magnesium during the hydration of C3S and CSH formation. Scanning electron microscopy and mid-infrared studies.” Adv. Cem. Res. 17 (1): 9–21. https://doi.org/10.1680/adcr.2005.17.1.9.
Flores, I., K. Sobolev, L. Torres-Martinez, E. Cuellar, P. Valdez, and E. Zarazua. 2010. “Performance of cement systems with nano- particles produced by using the sol-gel method.” Transp. Res. Rec. 2141: 10–14. https://doi.org/10.3141/2141-03.
García-Lodeiro, I., A. Fernández-Jiménez, M. T. Blanco, and A. Palomo. 2008. “FTIR study of the sol-gel synthesis of cementitious gels: C-S-H and N-A-S-H.” J. Sol-Gel Sci. Technol. 45 (1): 63–72. https://doi.org/10.1007/s10971-007-1643-6.
Hassan, M. M., H. Dylla, L. N. Mohammad, and T. Rupnow. 2010. “Evaluation of the durability of titanium dioxide photocatalyst coating for concrete pavement.” Constr. Build. Mater. 24 (8): 1456–1461. https://doi.org/10.1016/j.conbuildmat.2010.01.009.
He, C., B. Osbaeck, and E. Makovicky. 1995. “Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects.” Cem. Concr. Res. 25 (8): 1691–1702. https://doi.org/10.1016/0008-8846(95)00165-4.
He, X., and X. Shi. 2008. “Chloride permeability and microstructure of portland cement mortars incorporating nanomaterials.” Transp. Res. Rec. 2070: 13–21. https://doi.org/10.3141/2070-03.
Jakobsson, S. 2002. “Determination of Si/Al ratios in semicrystalline aluminosilicates by FT-IR spectroscopy.” Appl. Spectrosc. 56 (6): 797–799. https://doi.org/10.1366/000370202760077559.
Jones, S. D., T. N. Pritchard, and D. F. Lander. 1995. “Physical properties of sol-gel aluminosilicates.” Microporous Mater. 3 (4–5): 419–431. https://doi.org/10.1016/0927-6513(94)00053-X.
Juilland, P., E. Gallucci, R. Flatt, and K. Scrivener. 2010. “Dissolution theory applied to the induction period in alite hydration.” Cem. Concr. Res. 40 (6): 831–844. https://doi.org/10.1016/j.cemconres.2010.01.012.
Kawashima, S., J. H. Kim, D. J. Corr, and S. P. Shah. 2012. “Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays.” Constr. Build. Mater. 36: 749–757. https://doi.org/10.1016/j.conbuildmat.2012.06.057.
Kloprogge, J. T., R. D. Schuiling, Z. Ding, L. Hickey, D. Wharton, and R. L. Frost. 2002. “Vibrational spectroscopic study of syngenite formed during the treatment of liquid manure with sulphuric acid.” Vib. Spectrosc. 28 (2): 209–221. https://doi.org/10.1016/S0924-2031(01)00139-4.
Kuo, W. Y., J. S. Huang, and C. H. Lin. 2006. “Effects of organo-modified montmorillonite on strengths and permeability of cement mortars.” Cem. Concr. Res. 36 (5): 886–895. https://doi.org/10.1016/j.cemconres.2005.11.013.
Lagier, F., and K. E. Kurtis. 2007. “Influence of portland cement composition on early age reactions with metakaolin.” Cem. Concr. Res. 37 (10): 1411–1417. https://doi.org/10.1016/j.cemconres.2007.07.002.
Land, G., and D. Stephan. 2012. “The influence of nano-silica on the hydration of ordinary portland cement.” J. Mater. Sci. 47 (2): 1011–1017. https://doi.org/10.1007/s10853-011-5881-1.
Lewis, D. G., and V. C. Farmer. 1986. “Infrared absorption of surface hydroxyl groups and lattice vibrations in lepidocrocite (–FEOOH) and boehmite (–ALOOH).” Clay Miner. 21 (1): 93–100. https://doi.org/10.1180/claymin.1986.021.1.08.
Lindgreen, H., M. Geiker, H. Krøyer, N. Springer, and J. Skibsted. 2008. “Microstructure engineering of portland cement pastes and mortars through addition of ultrafine layer silicates.” Cem. Concr. Compos. 30 (8): 686–699. https://doi.org/10.1016/j.cemconcomp.2008.05.003.
Lothenbach, B., and F. Winnefeld. 2006. “Thermodynamic modelling of the hydration of portland cement.” Cem. Concr. Res. 36 (2): 209–226. https://doi.org/10.1016/j.cemconres.2005.03.001.
Morsy, M. S., S. H. Alsayed, and M. Aqel. 2011. “Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar.” Constr. Build. Mater. 25 (1): 145–149. https://doi.org/10.1016/j.conbuildmat.2010.06.046.
Mukhopadhyay, A. K. 2011. “Next-generation nano-based concrete construction products: A review.” In Nanotechnology in civil infrastructure, edited by K. Gopalakrishnan, B. Birgisson, P. Taylor, and N. O. Attoh-Okine, 207–223. Berlin: Springer.
Muñoz, J. F., Y. Yao, J. Youtcheff, and T. Arnold. 2014. “Mixtures of silicon and aluminum oxides to optimize the performance of nanoporous thin films in concrete.” Cem. Concr. Compos. 48: 140–149. https://doi.org/10.1016/j.cemconcomp.2013.11.013.
Nehdi, M. L. 2014. “Clay in cement-based materials: Critical overview of state-of-the-art.” Constr. Build. Mater. 51: 372–382. https://doi.org/10.1016/j.conbuildmat.2013.10.059.
Papatzani, S., and K. Paine. 2017. “Inorganic and organomodified nano-montmorillonite dispersions for use as supplementary cementitious materials—A novel theory based on nanostructural studies.” Nanocomposites. 3 (1): 2–19. https://doi.org/10.1080/20550324.2017.1315210.
Peethamparan, S., J. Olek, and S. Diamond. 2009. “Mechanism of stabilization of Na-montmorillonite clay with cement kiln dust.” Cem. Concr. Res. 39 (7): 580–589. https://doi.org/10.1016/j.cemconres.2009.03.013.
Porro, A., J. S. Dolado, J. J. Gaitero, and H. Manzano. 2010. “Nanotechnology and concrete: Concepts and approach.” Transp. Res. Rec. 2142: 127–129. https://doi.org/10.3141/2142-19.
Pozarnsky, G. A., and A. V. McCormick. 1995. “Multinuclear NMR study of aluminosilicate sol-gel synthesis using the prehydrolysis method.” J. Non-Cryst. Solids 190 (3): 212–225. https://doi.org/10.1016/0022-3093(95)00240-5.
Quennoz, A., and K. L. Scrivener. 2013. “Interactions between alite and C3A-gypsum hydrations in model cements.” Cem. Concr. Res. 44: 46–54. https://doi.org/10.1016/j.cemconres.2012.10.018.
Quercia, G., G. Husken, and H. J. H. Brouwers. 2012. “Water demand of amorphous nano silica and its impact on the workability of cement paste.” Cem. Concr. Res. 42 (2): 344–357. https://doi.org/10.1016/j.cemconres.2011.10.008.
Rothstein, D., J. J. Thomas, B. J. Christensen, and H. M. Jennings. 2002. “Solubility behavior of Ca-, S-, Al-, and Si-bearing solid phases in portland cement pore solutions as a function of hydration time.” Cem. Concr. Res. 32 (10): 1663–1671. https://doi.org/10.1016/S0008-8846(02)00855-4.
Russell, J. D., V. C. Farmer, and D. G. Lewis. 1978. “Lattice vibrations of boehmite (-AlOOH): Evidence for a space group.” Spectrochim. Acta Part A: Mol. Spectrosc. 34 (12): 1151–1153. https://doi.org/10.1016/0584-8539(78)80073-7.
Sanchez, F., and K. Sobolev. 2010. “Nanotechnology in concrete—A review.” Constr. Build. Mater. 24 (11): 2060–2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014.
Schneider, J. F., N. P. Hasparyk, D. A. Silva, and P. J. Monteiro. 2008 “Effect of lithium nitrate on the alkali-silica reaction gel.” J. Am. Ceram. Soc. 91 (10): 3370–3374. https://doi.org/10.1111/j.1551-2916.2008.02638.x.
Sinko, K., R. Mezei, J. Rohonczy, and P. Fratzl. 1999. “Gel structures containing Al(III).” Langmuir 15 (20): 6631–6636.
Thomas, J. J., H. M. Jennings, and J. J. Chen. 2009. “Influence of nucleation seeding on the hydration mechanisms of tricalcium silicate and cement.” J. Phys. Chem. C 113 (11): 4327–4334. https://doi.org/10.1021/jp809811w.
Tregger, N., M. Pakula, and S. P. Shah. 2010. “Influence of micro- and nanoclays on fresh state of concrete.” Transp. Res. Rec. 2141: 68–74. https://doi.org/10.3141/2141-12.
Ylmén, R., U. Jäglid, B. M. Steenari, and I. Panas. 2009. “Early hydration and setting of portland cement monitored by IR, SEM and Vicat techniques.” Cem. Concr. Res. 39 (5): 433–439. https://doi.org/10.1016/j.cemconres.2009.01.017.
Yu, P., R. J. Kirkpatrick, B. Poe, P. F. McMillan, and X. Cong. 1999. “Structure of calcium silicate hydrate (C-S-H): Near-, mid-, and far-infrared spectroscopy.” J. Am. Ceram. Soc. 82 (3): 742–748. https://doi.org/10.1111/j.1151-2916.1999.tb01826.x.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Oct 6, 2017
Accepted: Jan 10, 2018
Published online: Apr 28, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.