Cement-Bonded Panels Produced with Sugarcane Bagasse Cured by Accelerated Carbonation
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 6
Abstract
This study aimed to evaluate cement-bonded panels produced with sugarcane bagasse cured by accelerated carbonation at early ages. The cement-bonded bagasse panels produced were subjected to two separate curing processes: (1) curing for 2 days (48 h) in a climatic chamber, followed by 25 days in an air-saturated environment; and (2) curing for 2 days (48 h) in a climatic chamber, and after in environment with carbon dioxide (24 h), followed by 24 days in an air-saturated environment. After 28 days of curing, physical and mechanical characterizations were conducted following the recommendations of European regulations. The physical results of the cement-bonded bagasse panels were lower than that the required by international standards. Moreover, accelerated carbonation decreased the water absorption value by 37.29% and the thickness swelling value by 64.84%, i.e., there was an improvement on dimensional stability of the carbonated cement-bonded bagasse panels. In addition, accelerated carbonation increased the mechanical strength values in the bending of the modulus of rupture by 78.69% and the modulus of elasticity by 125.13% of the cement-bonded bagasse panels.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are sincerely thankful to the financial support from the Brazilian National Council for Scientific and Technological Development (CNPq) (Grant No. 464532/2014-0) and the Coordination of Improvement of Higher Education Personnel (CAPES), as well as the São Paulo Research Foundation (FAPESP) (Grant No. 16/07372-9). The authors are also thankful to the company Infibra S. A. for continuous support to the Research Nucleus on Materials for Biosystems.
References
AFNOR (French Association of Standardization). 1993. “Agricultural and food products—Determination of crude fibre.” [In French.] French Standard NF V03-040. Paris: AFNOR.
Almeida, A. E. F. S., G. H. D. Tonoli, S. F. Santos, and H. Savastano, Jr. 2013. “Improved durability of vegetable fiber reinforced cement composite subject to accelerated carbonation at early age.” Cem. Concr. Compos. 42: 49–58.
Almeida, R. R., C. H. Menezzi, and D. E. Teixeira. 2002. “Utilization of the coconut shell of babacu (Orbignya sp.) to produce cement-bonded particleboard.” Bioresour. Technol. 85 (2): 159–163.
Anjos, M. A. S., A. E. Martinelli, D. M. Melo, T. Renovato, P. D. Souza, and J. C. Freitas. 2013. “Hydration of oil well cement containing sugarcane biomass waste as a function of curing temperature and pressure.” J. Petrol Sci. Eng. 109: 291–297.
Ashori, A., T. Tabarsa, and S. Sepahvand. 2012. “Cement-bonded composite boards made from poplar strands.” Constr. Build. Mater. 26 (1): 131–134.
ASTM. 2007. Standard test methods for water solubility of wood. ASTM D1110-84. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard specification for portland cement. ASTM C150-04. West Conshohocken, PA: ASTM.
Babatunde, A. 2011. “Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue.” J. For. Res. 22 (1): 111–115.
Bentur, A., and S. Mindess. 2007. Fibre reinforced cementitious composites. London: Taylor & Francis.
Borges, P. H. R., J. O. Costa, N. B. Milestone, C. J. Lynsdale, and R. E. Streatfield. 2010. “Carbonation of CH and C-S-H in composite cement pastes containing high amounts of BFS.” Cem. Concr. Res. 40 (2): 284–292.
Cabral, M. R., E. Y. Nakanishi, and J. Fiorelli. 2017. “Evaluation of the effect of accelerated carbonation in cement-bagasse panels after cycles of wetting and drying.” J. Mater. Civ. Eng. 29 (6): 04017018.
Conab (Company of the National Supply). 2015. Monitoring of the Brazilian grain harvest. Brasilia, Brazil: National Supply Company.
CEN (European Committee for Standardization). 1993a. Wood-based panels: Determination of density. EN 323. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 1993b. Wood-based panels: Determination of modulus of elasticity in bending and of bending strength. EN 310. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 1993c. Wood-based panels: Determination of moisture content. EN 322. Brussels, Belgium: CEN.
Fan, M., M. K. Ndikontar, X. Zhou, and J. N. Ngamveng. 2012. “Cement-bonded composites made from tropical woods: Compatibility of wood and cement.” Constr. Build. Mater. 36: 135–140.
Fernández-Bertos, M., S. J. R. Simons, C. D. Hills, and P. J. Carey (2004). “A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of .” J. Hazard. Mater. 112 (3): 193–205.
Ferraz, J. M., C. Del Menezzi, D. E. Teixeira, and S. Martins. 2011. “Effects of treatment of coir fiber and cement/fiber ratio on properties of cement-bonded composites.” BioResources 6 (3): 3481–3492.
Fiorelli, J., C. A. Gomide, F. A. R. Lahr, M. F. do Nascimento, D. de Lucca Sartori, J. E. M. Ballesteros, and U. L. Belini. 2014. “Physico-chemical and anatomical characterization of residual lignocellulosic fibers.” Cellulose 21 (5): 3269–3277.
Genet, T. 2011. Introduction to statistics: Basics, concepts, methods. Saarbrucken, Germany: VDM Verlag Dr. Müller.
Hewlett, P. C. 2004. Lea’s chemistry of cement and concrete. 4th ed. London: Butterworth-Heinemann.
Hofsetz, K., and M. A. Silva. 2012. “Brazilian sugarcane bagasse: Energy and non-energy consumption.” Biomass Bioenergy 46: 564–573.
ISO. 1987. Cement-bonded particleboards—Boards of portland or equivalent cement reinforced with fibrous wood particles. ISO 8335. Stockholm, Sweden: ISO.
Jorge, F. C., C. Pereira, and J. M. F. Ferreira. 2004. “Wood-cement composites: A review.” Holz als Roh und Werkstoff 62 (5): 370–377.
Kazmi, S. M., S. Abbas, M. A. Saleem, M. J. Munir, and A. Khitab. 2016. “Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashes.” Constr. Build. Mater. 120: 29–41.
Mo, K. H., U. A. Johnson, Z. J. Mohd, P. Y. Soon, and S. C. Lee. 2016. “Green concrete partially comprised of farming waste residues: A review.” J. Cleaner Prod. 117: 122–138.
Mohr, B. J., J. J. Biernacki, and K. E. Kurtis. 2007. “Supplementary cementitious materials for mitigating degradation of kraft pulp fiber-cement composites.” Cem. Concr. Res. 37 (11): 1531–1543.
Moslemi, A. A. 1999. “Emerging technologies in mineral-bonded wood and fiber composites.” Adv. Perform. Mater. 6 (2): 161–179.
Okino, E. Y., M. R. Souza, M. Santana, M. Alves, M. E. Sousa, and D. E. Teixeira. 2004. “Cement-bonded wood particleboard with a mixture of eucalypt and rubberwood.” Cem. Concr. Compos. 26 (6): 729–734.
Pereira, P. H. F., H. C. J. Voorwald, M. O. H. Cioffi, D. R. Mulinari, S. M. Da Luz, and M. L. C. P. Da Silva. 2011. “Sugarcane bagasse pulping and bleaching: Thermal and chemical characterization.” Bioresources 6 (3): 2471–2482.
Pizzol, V. D., L. M. Mendes, H. Savastano, M. Frías, F. J. Davila, M. A. Cincotto, V. M. John, and G. H. D. Tonoli. 2014. “Mineralogical and microstructural changes promoted by accelerated carbonation and ageing cycles of hybrid fiber-cement composites.” Constr. Build. Mater. 68: 750–756.
Rezende, C. A., M. A. Lima, P. Maziero, E. R. Azevedo, W. Garcia, and I. Polikarpov. 2011. “Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibility.” Biotechonol. Biofuels 4 (1): 54.
Rostami, V., Y. Shao, A. Boyd, and H. Zhen. 2012. “Microstructure of cement paste subject to early carbonation curing.” Cem. Concr. Res. 42 (1): 186–193.
Santos, S. F., R. Schmidt, A. E. Almeida, G. H. Tonoli, and H. Savastano. 2015. “Supercritical carbonation treatment on extruded fibre–cement reinforced with vegetable fibres.” Cem. Concr. Compos. 56: 84–94.
Savastano, H., and V. Agopyan. 1999. “Transition zone studies of vegetable fibre-cement paste composites.” Cem. Concr. Compos. 21 (1): 49–57.
Soroushian, P., W. Jong-Pil, C. Habibur, and A. Nosson. 2003. “Development of accelerated processing techniques for cement-bonded wood particleboard.” Cem. Concr. Compos. 25 (7): 721–727.
Taylor, H. F. W. 1997. Cement chemistry. 2nd ed. London: Thomas Telford.
Toledo Filho, R. D., K. Ghavami, G. L. England, and K. Scrinever. 2003. “Development of vegetable fibre–mortar composites of improved durability.” Cem. Concr. Compos. 25 (2): 185–196.
Tonoli, G. H., U. P. Rodrigues Filho, H. Savastano, J. Bras, M. N. Belgacem, and F. A. Rocco Lahr. 2009. “Cellulose modified fibres in cement based composites.” Compos. Part A Appl. Sci. Manuf. 40 (12): 2046–2053.
Tonoli, G. H. D., V. D. Pizzol, G. Urrea, S. F. Santos, L. M. Mendes, V. Santos, and H. Savastano. 2016. “Rationalizing the impact of aging on fiber-matrix interface and stability of cement-based composites submitted to carbonation at early ages.” J. Mater. Sci. 51 (17): 7929–7943.
Wang, L., S. C. Season, C. W. Daniel, C. S. P. Tsang, and S. Kaimin. 2016. “Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards.” Constr. Build. Mater. 125: 316–325.
Yao, F., Q. Wu, Y. Lei, W. Guo, and Y. Xu. 2008. “Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis.” Polym. Degrad. Stab. 93 (1): 90–98.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jan 25, 2017
Accepted: Dec 5, 2017
Published online: Apr 5, 2018
Published in print: Jun 1, 2018
Discussion open until: Sep 5, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.