Pore Structure Characterization of Pervious Concrete Using X-Ray Microcomputed Tomography
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 6
Abstract
Pervious concrete (PC) is a class of porous materials that has found application in building materials, specifically in pavements, for its stormwater mitigation abilities. X-ray microcomputed tomography was used to understand and quantify the three-dimensional (3D) pore morphology, shape factors, and size descriptors in PC mixtures prepared with varying porosity. The Zingg pore shape classification indicated higher percent of rod-shaped pores and the frequency of spheroid-form pores was higher in single-sized mixtures, whereas dense mixtures had higher occurrence of blade-form pores. The average pore sphericity was in the range of 0.40–0.60, indicating semispherical pores. Few large-sized pores in PC had a significant influence on the relation between 3D pore-structural-permeability properties. The visualization of 3D pore structure indicated the importance of isolated pores in PC for periodic maintenance. The new findings on the pore structure will assist in mix design optimization, selection of mixtures, and modeling of PC.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the Government of India Ministry of Human Resource Development Department of Higher Education for financial support vide Future of Cities research project Grant No. F. No. 4-22/2014-TS.I, dated January 23, 2014; professor in charge and operator, X-ray micro-CT lab, Central Research Facility, Indian Institute of Technology Kharagpur, India; and professor in charge and operator, Material Testing Laboratory, Structural Engineering Section, Department of Civil Engineering, IIT Kharagpur, India.
References
Akand, L., Yang, M., and Gao, Z. (2016). “Characterization of pervious concrete through image based micromechanical modeling.” Constr. Build. Mater., 114, 547–555.
ASTM. (2012). “Standard test method for density and void content of hardened pervious concrete.” ASTM C1754-12/C1754M, West Conshohocken, PA.
Babout, L. (2006). “X-ray tomography imaging: A necessary tool for material science.” Automatyka, 10, 117–124.
Blott, S. J., and Pye, K. (2008). “Particle shape: A review and new methods of characterization and classification.” Sedimentology, 55(1), 31–63.
Chandrappa, A. K., and Biligiri, K. P. (2016). “Comprehensive investigation of permeability characteristics of pervious concrete: A hydrodynamic approach.” Constr. Build. Mater., 123, 627–637.
Chandrappa, A. K., and Biligiri, K. P. (2017). “Relationships between structural, functional, and X-ray micro computed tomography parameters of pervious concrete for pavement applications.” Transp. Res. Rec., 2629, 51–62.
Cosic, K., Korat, L., Ducman, V., and Netinger, I. (2015). “Influence of aggregate type and size on properties of pervious concrete.” Constr. Build. Mater., 78, 69–76.
Deo, O., and Neithalath, N. (2010). “Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features.” Mater. Sci. Eng. A, 528(1), 402–412.
Du Plessis, A., Le Roux, S. G., and Guelpa, A. (2016). “Comparison of medical and industrial X-ray computed tomography for non-destructive testing.” Case Stud. Nondestr. Test. Eval., 6, 17–25.
Golden, J. S. (2004). “The built environment induced urban heat island effect in rapidly urbanizing arid regions—A sustainable urban engineering complexity.” Environ. Sci., 1(4), 321–349.
Kuang, X., Sansalone, J., Ying, G., and Ranieri, V. (2011). “Pore-structure models of hydraulic conductivity for permeable pavement.” J. Hydrol., 399(3–4), 148–157.
Li, H., Harvey, J. T., Holland, T. J., and Kayhanian, M. (2013). “Corrigendum: The use of reflective and permeable pavements as a potential practice for heat island mitigation and stormwater management.” Environ. Res. Lett., 8(4), 049501.
Mehta, P. K., and Monteiro, P. J. M. (2006). Concrete microstructure, properties, and materials, 3rd Ed., McGraw-Hill, New York.
Miller, J. D., Kim, H., Kjeldsen, T. R., Packman, J., Grebby, S., and Dearden, R. (2014). “Assessing the impact of urbanization on storm runoff in a peri-urban catchment using historical change in impervious cover.” J. Hydrol., 515, 59–70.
Neithalath, N., Sumanasooriya, S., and Deo, O. (2010). “Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction.” Mater. Charact., 61(8), 802–813.
Neithalath, N., Weiss, J., and Olek, J. (2006). “Predicting the permeability of pervious concrete (enhanced porosity concrete) from non-destructive electrical measurements.” Purdue Univ., West Lafayette, IN.
Qian, T., Li, J., and Deng, Y. (2016). “Pore structure modified diatomite supported PEG composites for thermal energy storage.” Sci. Rep., 6(1), 32392.
Schmitt, M., Halisch, M., Muller, C., and Fernandes, C. P. (2016). “Classification and quantification of pore shapes in sandstone reservoir rocks with 3-D ray micro-computed tomography.” Solid Earth, 7(1), 285–300.
Sizemore, H. G. (2014). “Soil permeability: Accuracy of the Kozeny-Carman equation in shallow flowproblems on Mars and Earth.” Proc., 45th Lunar and Planetary Science Conf., Planetary Science Institute, Tucson, AZ.
Torskaya, T., Shabro, V., Torres-Verdin, C., Salazar-Tio, R., and Revil, A. (2014). “Grain shape effects on permeability, formation factor, and capillary pressure from pore-scale modeling.” Transp. Porous Media, 102(1), 71–90.
VGStudio MAX version 2.2 [Computer software]. Volume Graphics GmbH, Heidelberg, Germany.
Wadell, H. (1932). “Volume, shape, and roundness of rock particles.” J. Geol., 40(5), 443–451.
Zingg, T. (1935). “BeiträgezurSchotteranalyse.” Min. Petrog. Mitt. Schweiz., 15, 39–140.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 20, 2016
Accepted: Nov 21, 2017
Published online: Apr 9, 2018
Published in print: Jun 1, 2018
Discussion open until: Sep 9, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.