Determination of Crumb Rubber Content of Asphalt Rubber Binders
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 4
Abstract
The study focused on two new laboratory procedures developed for the determination of crumb rubber content of asphalt rubber binders. The first methodology was on the basis of the comparative analysis of cobalt and antimony content of base bitumen, crumb rubber, and asphalt rubber. The second was on the basis of the analysis of combustion products of asphalt rubber binders and of their components. Investigations were performed on binders prepared in the laboratory or sampled at production plants during pavement rehabilitation works. Obtained results were encouraging because it was found that both procedures were characterized by satisfactory levels of accuracy and precision.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The investigation described in this paper was carried out as part of the POLIPNEUS and TyRec4LIFE research projects, respectively funded by Ecopneus S.c.p.A. and by the European Commission.
References
Abdelrahman, M., and Carpenter, S. (1999). “Mechanism of interaction of asphalt cement with crumb rubber modifier.” J. Transp. Res. Board, 1661, 106–113.
Artamendi, I., Eastmond, G. C., and Khalid, H. (2002). “Influence of crumb rubber modifiers (CRM) on performance-related properties of asphalt binders.” Proc., 3rd Int. Conf. on Bituminous Mixtures and Pavements, Vol. 1, Thessaloniki, Greece, 65–74.
Asphalt Rubber Italia. (2012). Technical specifications for gap-graded asphalt concrete with asphalt rubber, Agliana, Italy, (in italian).
ASTM. (2009). “Standard specification for asphalt-rubber binder.” ASTM D6114, West Conshohocken, PA.
ASTM. (2016). “Standard specification for woven wire test sieve cloth and test sieves.” ASTM E11, West Conshohocken, PA.
Bahia, H., and Davies, R. (1995). “Role of crumb rubber content and type in changing critical properties of asphalt binders.” J. Assoc. Asphalt Paving Technol., 64, 130–162.
Blumenthal, M. H. (1996). “Producing ground scrap tire rubber: A comparison between ambient and cryogenic technologies.” Proc., 17th Biennial Waste Processing Conf., ASME, New York.
BSI (British Standards Institution). (2009). “Bitumen and bituminous binders—Specifications for paving grade bitumens.” EN 12591, London.
BSI (British Standards Institution). (2012). “Bituminous mixtures—Test methods for hot mix asphalt. 39: Binder content by ignition.” EN 12697-39, London.
CalTrans. (2005). Use of scrap tire rubber: State of the technology and best practices, CIWMB Partnered Research, Sacramento, CA.
CEN (European Committee for Standardization). (2010). “Materials produced from end of life tyres—Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities.” CEN/TS 14243, Brussels, Belgium.
Farina, A., Zanetti, M. C., Santagata, E., Blengini, G. A., and Lanotte, M. (2014). “Life cycle assessment of road pavements containing crumb rubber from end-of-life tires.” Proc., Int. Symp. on Pavement LCA 2014, Davis, CA.
Frantzis, P. (2004). “Crumb rubber-bitumen interactions: Diffusion of bitumen into rubber.” J. Mater. Civ. Eng., 387–390.
Heitzman, M. A. (1992). State of the practice: Design and construction of asphalt paving materials with crumb rubber modifier methods, Federal Highway Administration, Washington, DC.
Oliver, J. W. H. (1981). “Modification of paving asphalts by digestion with scrap rubber.” Proc., 60th Annual Meeting of the Transportation Research Board, Transportation Research Board, Washington, DC.
Santagata, E. (1994). “An alternative approach to the determination of the AC content in asphalt mixes: The combustion method.” Proc., 2nd Int. Symp. Highway Surfacing, Belfast, U.K.
Santagata, E., Dalmazzo, D., Lanotte, M., Zanetti, M. C., and Ruffino, B. (2012). “Relationship between crumb rubber morphology and asphalt rubber viscosity.” Proc., 5th Asphalt Rubber Int. Conf., Munich, Germany, 513–532.
Santagata, E., Zanetti, M. C., Corbetta, G., and Fornai, D. (2013). “POLIPNEUS project. Science and technology of bituminous binders and mixtures containing crumb rubber from end-of-life tyres.” Strade & Autostrade, 97(1), 62–68 (in italian).
Santagata, F. A., Canestrari, F., and Pasquini, E. (2009). Asphalt rubber bituminous mixtures, final report, Inter University Road and Airport Research Center (CIRS), Ancona, Italy, (in italian).
Shen, J., Amirkhanian, S., Xiao, F., and Tang, B. (2009). “Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders.” Constr. Build. Mater., 23(1), 304–310.
TYREC4LIFE. (2011). Development and implementation of innovative and sustainable technologies for the use of scrap tyre rubber in road pavements, Province of Turin, Turin, Italy.
Visser, A. T., and Verhaeghe, B. (2000). “Bitumen rubber: Lessons learned in South Africa.” Proc., Asphalt Rubber 2000 Conf., Vilamoura, Portugal.
Way, G. B., Kaloush, K. E., and Biligiri, K. P. (2012). Asphalt-rubber standard practice guide, Rubber Pavements Association, Tempe, AZ.
Zanetti, M., Fiore, S., Ruffino, B., Santagata, E., Dalmazzo, D., and Lanotte, M. (2015). “Characterization of crumb rubber from end-of-life tyres for paving applications.” Waste Manage., 45, 161–170.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 30, 2017
Accepted: Sep 21, 2017
Published online: Jan 29, 2018
Published in print: Apr 1, 2018
Discussion open until: Jun 29, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.