Improvement in Adhesion, Abrasion Resistance, and Aging of Polyurethane Coatings Prepared with Polycarbonate Diol for Internal Pipelines
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 10
Abstract
The paper deals with the improvement of adhesion, abrasion resistance, and aging of polyurethane coatings made with polycarbonate diol (PCD) intended for internal pipelines. The influence of the polyol nature on the properties and aging resistance of polyurethane coatings synthesized at laboratory scale using polyether glycol and PCD is determined. The use of PCD or mixtures of 50% by weight polyether glycol (PTMEG) and 50% by weight PCD in the synthesis of the polyurethane coatings strongly reduces the amount of material removed by abrasion. On the other hand, the use of 40% by weight PTMEG and 60% by weight PCD increases the mechanical properties of the polyurethanes and their pull-off strength values in joints made with steel substrate. After aging by immersion in water at 70°C for two weeks, the reduction of pull-off strength in the joint made with the polyurethane made with PTMEG and with a PCD and PTMEG mixture is similar but the loci of failure are different. Only the polyurethane coating prepared with 40% by weight PTMEG and 60% by weight PCD mixture shows a cohesive failure in the coating.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support of UBE Corporation Europe S.A.U. is acknowledged. The authors thank Huntsman International LLC (Woodlands, Texas) for providing the isocyanate used in this study.
References
ASTM. (2001). “Standard test method for abrasion resistance of organic coatings by the Taber abrader.” ASTM D4060, West Conshohocken, PA.
ASTM. (2002). “Standard test method for pull-off strength of coatings using portable adhesion testers.” ASTM D4541, West Conshohocken, PA.
ASTM. (2006). “Standard test method for rubber property–Effect of liquids.” ASTM D471, West Conshohocken, PA.
Bell, J., Marchall, D., Perez, E., and Bell, G. E. C. (2013). “Effects of application methodology on barrier film integrity and performance of polyurethane coatings on steel water pipe per AWWA C222.” Proc., Pipelines 2013: Pipelines and Trenchless Construction and Renewals—A Global Perspective, S. Arnaout and L. Slavin, eds., ASCE, Reston, VA, 566–575.
Brousseau, R., and Qian, S. (1994). “Distribution of steady-state cathodic currents underneath a disbonded coating.” Corros. Sci., 50(12), 907–911.
Chattopadhyay, D. K., Panda, S. S., and Raju, K. V. S. N. (2005). “Thermal and mechanical properties of epoxy acrylate/methacrylates UV cured coatings.” Prog. Org. Coat., 54(1), 10–19.
Chattopahyay, D. K., and Webster, D. C. (2009). “Thermal stability and flame retardancy of polyurethanes.” Prog. Polym. Sci., 34(10), 1068–1133.
Croll, S. G., Siripirom, C., and Keil, B. D. (2014). “Pull-off adhesion test for coatings on large pipes: Possible variations in failure location and mode.” Proc., Pipelines 2014: From Underground to the Forefront of Innovation and Sustainability, S. Rahman and D. McPherson, eds., ASCE, Reston, VA, 1319–1333.
Funke, W. (1985). “The role of adhesion in corrosion protection by organic coatings.” J. Oil Colour Chem. Assoc., 68(9), 229–232.
García-Pacios, V., Colera, M., Iwata, Y., and Martín-Martínez, J. M. (2013). “Incidence of the polyol nature in waterborne polyurethane dispersions on their performance as coatings on stainless steel.” Prog. Org. Coat., 76(12), 1726–1729.
González-García, Y., González, S., and Souto, R. M. (2007). “Electrochemical and structural properties of polyurethane coating on steel substrates for corrosion protection.” Corros. Sci., 49(9), 3514–3526.
Guan, S. W. (2003). “100% solids rigid polyurethane coatings technology and its application on pipeline corrosion protection.” Proc., New Pipeline Technologies, Security and Safety, M. Najafi, ed., ASCE, Reston, VA, 156–165.
Guermazi, N., Elleuch, K., Ayedi, H. F., and Kapsa, P. H. (2008). “Aging effect on thermal, mechanical and tribological behavior of polymeric coatings used for pipeline application.” J. Mater. Process. Technol., 203(1–3), 404–410.
ISO. (2005). “Rubber, vulcanized or thermoplastic—Determination of tensile stress-strain properties.” ISO 37, Geneva.
Jofre-Reche, J. A., Yañez-Pacios, A. J., Colera, M., Costa, V., and Martín-Martínez, J. M. (2014). “Novel polyurethane coatings obtained with polycarbonate diol for pipelines with improved mechanical properties and hydrolysis resistance.” Proc., Polyurethanes Technical Conf. 2014, American Chemistry Council, Dallas, 213–222.
Li, J. H., Hong, R. Y., Li, M. Y., Li, H. Z., Zheng, Y., and Ding, J. (2009). “Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings.” Prog. Org. Coat., 64(4), 504–509.
Samimi, A. (2012). “Use of polyurethane coating to prevent corrosion in oil and gas pipelines transfer.” Int. J. Innovation. Appl. Stud., 1(2), 186–193.
Tanaka, H., and Kunimura, M. (2002). “Mechanical properties of thermoplastic polyurethanes containing aliphatic polycarbonate soft segments with different chemical structures.” Polym. Eng. Sci., 42(6), 1333–1349.
Toma, D., Brandl, W., and Marginean, G. (2001). “Wear and corrosion behaviour of thermally sprayed cermet coatings.” Surf. Coat. Technol., 138(2-3), 149–158.
Wood, R. J. K., Puget, Y., Trethewey, K. R., and Stokes, K. (1998). “The performance of marine coatings and pipe materials under fluid-borne sand erosion.” Wear, 219(1), 46–59.
Zhou, R., Lu, D. H., Jiang, Y. H., and Li, Q. N. (2005). “Mechanical properties and erosion wear resistance of polyurethane matrix composites.” Wear, 259(1–6), 676–683.
Zhou, S., Wu, L., Sun, J., and Shen, W. (2002). “The change of the properties of acrylic-based polyurethane via addition of nano-silica.” Prog. Org. Coat., 45(1), 33–42.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 29, 2016
Accepted: Mar 15, 2017
Published online: Jun 9, 2017
Published in print: Oct 1, 2017
Discussion open until: Nov 9, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.