Compressive Stress-Strain Model for High-Strength Concrete Reinforced with Forta-Ferro and Steel Fibers
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 10
Abstract
One of the effective ways to prevent the brittle behavior of high-strength concrete is to use fibers. Therefore knowing the stress-strain behavior of high-strength fiber-reinforced concrete is essential for nonlinear analysis and design purposes. In order to investigate the compressive stress-strain behavior of concrete reinforced with Forta-Ferro and steel fibers with and without the inclusion of silica-fume and nanosilica pozzolans, this paper experimentally investigates the effect of fibers and pozzolans on the mechanical properties of fiber-reinforced high-strength concrete including compressive strength, strain at peak stress, ultimate strain, and toughness index. Based on the experimental results, empirical equations are proposed for the compressive stress-strain parameters affecting the behavior of fiber-reinforced concrete. Finally, to predict the stress-strain relationship of high-strength fiber-reinforced concrete, two different models are presented which are capable of properly predicting the experimental curves. Because using silica fume and nanosilica leads to a change in the gradient of the stress-strain curve of fiber-reinforced concrete, the necessity of modifying the proposed models in order to improve accuracy is explored.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdullah, K. S., and Saeki, N. (1997). “Prediction for the stress-strain curve of steel fiber reinforced concrete.” Trans. Jpn. Concr. Inst., 18, 175–182.
ASTM. (2007). “Standard practice for making and curing concrete test specimens in the laboratory.” ASTM C192/C192M, West Conshohocken, PA.
ASTM. (2014). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C39/C39M, West Conshohocken, PA.
Barros, J. A., and Figueiras, J. A. (1999). “Flexural behavior of SFRC: Testing and modeling.” J. Mater. Civil Eng., 331–339.
Bencardino, F., Rizzuti, L., Spadea, G., and Swamy, R. N. (2008). “Stress-strain behavior of steel fiber-reinforced concrete in compression.” J. Mater. Civil Eng., 255–263.
Cao, Y., Zavaterri, P., Youngblood, J., Moon, R., and Weiss, J. (2015). “The influence of cellulose nanocrystal additions on the performance of cement paste.” Cem. Concr. Compos., 56(1), 73–83.
Carreira, D. J., and Chu, K. M. (1985). “Stress-strain relationship for plain concrete in compression.” ACI J., 82(6), 797–804.
Chi, Y., Xu, L., and Zhang, Y. (2014). “Experimental study on hybrid fiber-reinforced concrete subjected to uniaxial compression.” J. Mater. Civil Eng., 211–218.
Detwiler, R. J., and Mehta, P. K. (1989). “Chemical and physical effects of silica fume on the mechanical behavior of concrete.” Mater. J., 86(6), 609–614.
Ezeldin, A. S., and Balaguru, P. N. (1992). “Normal- and high-strength fiber-reinforced concrete under compression.” J. Mater. Civil Eng., 415–429.
Fallah, S., and Nematzadeh, M. (2017). “Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume.” Constr. Build. Mater., 132(1), 170–187.
Fanella, D. A., and Naaman, A. E. (1985). “Stress-strain properties of fiber reinforced mortar in compression.” J. Am. Concr. Inst., 82(4), 475–483.
Hsu, L. S., and Hsu, C. T. (1994). “Stress-strain behavior of steel-fiber high-strength concrete under compression.” Struct. J., 91(4), 448–457.
Iyer, P., Kenno, S. Y., and Das, S. (2015). “Mechanical properties of fiber-reinforced concrete made with basalt filament fibers.” J. Mater. Civil Eng., 04015015.
Johari, M. M., Brooks, J. J., Kabir, S., and Rivard, P. (2011). “Influence of supplementary cementitious materials on engineering properties of high strength concrete.” Constr. Build. Mater., 25(5), 2639–2648.
Konsta-Gdoutos, M. S., Metaxa, Z. S., and Shah, S. P. (2010). “Highly dispersed carbon nanotube reinforced cement based materials.” Cem. Concr. Res., 40(7), 1052–1059.
Lee, S. C., Oh, J. H., and Cho, J. Y. (2015). “Compressive behavior of fiber-reinforced concrete with end-hooked steel fibers.” Materials, 8(4), 1442–1458.
Mansur, M. A., Chin, M. S., and Wee, T. H. (1999). “Stress-strain relationship of high-strength fiber concrete in compression.” J. Mater. Civil Eng., 21–29.
Nataraja, M. C., Dhang, N., and Gupta, A. P. (1999). “Stress-strain curves for steel-fiber reinforced concrete under compression.” Cem. Concr. Compos., 21(5), 383–390.
Nematzadeh, M., Salari, A., Ghadami, J., and Naghipour, M. (2016). “Stress-strain behavior of freshly compressed concrete under axial compression with a practical equation.” Constr. Build. Mater., 115(1), 402–423.
Nili, M., and Afroughsabet, V. (2010). “Combined effect of silica fume and steel fibers on the impact resistance and mechanical properties of concrete.” Int. J. Impact Eng., 37(8), 879–886.
Oliveira Júnior, L. Á. D., et al. (2010). “Stress-strain curves for steel fiber-reinforced concrete in compression.” Matéria (Rio de Janeiro), 15(2), 260–266.
Popovics, S. (1973). “A numerical approach to the complete stress-strain curve of concrete.” Cem. Concr. Res., 3(5), 583–599.
Sharbaf, M. R., and Hejazi, S. M. (2012). “An investigative study on the effects of nano-SiO2 on compressive strength and permeability of concrete.” Int. Conf. on Advanced Computer Theory and Engineering, 5th (ICACTE 2012), ASME, Cape Town, South Africa.
Shin, H. O., Yoon, Y. S., Lee, S. H., Cook, W. D., and Mitchell, D. (2015). “Effect of steel fibers on the performance of ultrahigh-strength concrete columns.” J. Mater. Civil Eng., 04014142.
Soroushian, P., and Lee, C. D. (1989). “Constitutive modeling of steel fiber reinforced concrete under direct tension and compression.” Fibre reinforced cements and concretes, recent developments, R. N. Swamy and B. Barr, eds., Elsevier Applied Science, London, 363–375.
Taerwe, L. R. (1993). “Influence of steel fibers on strain-softening of high-strength concrete.” Mater. J., 89(1), 54–60.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 25, 2016
Accepted: Feb 28, 2017
Published online: Jun 8, 2017
Published in print: Oct 1, 2017
Discussion open until: Nov 8, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.