Combined Effects of Metakaolin, Rice Husk Ash, and Polypropylene Fiber on the Engineering Properties and Microstructure of Mortar
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 7
Abstract
This paper reports an experimental study carried out to investigate the effects of using metakaolin (MK) and rice husk ash (RHA) as a partial replacement material for cement, and polypropylene (PP) as an additive, on the mechanical and water absorption properties of mortar. Cement mortar was produced using various replacement ratios of metakaolin ranging from 5 to 15%, and of rice husk ash ranging from 10 to 30%, by weight of cement. The PP fiber content considered was constant at 0.3%. Compressive strength, flexural strength, water absorption, ultrasonic pulse velocity (UPV) and scanning electron microscopy (SEM) analysis are reported in this paper. Results revealed that the combination of metakaolin, rice husk ash, and PP provided a positive influence on the mechanical properties of mortar. The samples incorporating the replacement of cement with a combination of 10% MK, 10% RHA, and 0.3% PP fiber showed better mechanical characteristics than the other mortar samples. In terms of water absorption, the addition of PP fiber reduced the permeability when compared with the mixtures with 15% MK and 10–30% RHA, and results indicated a higher absorption in comparison with the mortar containing 5–10% MK.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abouhussien, A. H., and Hassan, A. A. (2015). “Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis.” Constr. Build. Mater., 76, 297–306.
ASTM. (2001a). “Standard specification for portland cement.” ASTM C150, West Conshohocken, PA.
ASTM. (2001b). “TYPE F: Standard specification for chemical admixtures for concrete.” ASTM C494, West Conshohocken, PA.
ASTM. (2007). “Standard specification for the compressive strength of hydraulic cement mortars (using 2-in. [50-mm] cube specimens).” ASTM C109-99, West Conshohocken, PA.
ASTM. (2013a). “Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.” ASTM C618, West Conshohocken, PA.
ASTM. (2013b). “Standard specification for standard sand.” ASTM C778-13, West Conshohocken, PA.
ASTM. (2013c). “Standard test method for density, absorption, and voids in hardened concrete.” ASTM C642, West Conshohocken, PA.
Brooks, J. J., and Johari, M. M. A. (2001). “Effect of metakaolin on creep and shrinkage of concrete.” Cem. Concr. Compos., 23(6), 495–502.
Habeeb, G. A., and Mahmud, H. B. (2010). “Study on properties of rice husk ash and its use as cement replacement material.” Mater. Res., 13(2), 185–190.
Hsie, M., Tu, C. H., and Song, P. S. (2008). “Mechanical properties of polypropylene hybrid fiber-reinforced concrete.” Mater. Sci. Eng. A, 494(1), 153–157.
Kannan, V., and Ganesan, K. (2012). “Strength and water absorption properties of ternary blended cement mortar using rice husk ash and metakaolin.” J. Eng. Res., 1(4), 51–59.
Khatib, J. M., Negim, E. M., and Gjonbalaj, E. (2012). “High volume metakaolin as cement replacement in mortar.” World J. Chem., 7(1), 7–10.
Khotbehsara, M. M., Mohseni, E., Yazdi, M. A., Sarker, P., and Ranjbar, M. M. (2015). “Effect of nano-CuO and fly ash on the properties of self-compacting mortar.” Construct. Build. Mater., 94, 758–766.
Li, Z., and Ding, Z. (2003). “Property improvement of portland cement by incorporating with metakaolin and slag.” Cem. Concr. Res., 33(4), 579–584.
Madandoust, R., Mohseni, E., Mousavi, S. Y., and Namnevis, M. (2015). “An experimental investigation on the durability of self-compacting mortar containing nano-SiO2, nano-Fe2O3 and nano-CuO.” Constr. Build. Mater., 86, 44–50.
Madandoust, R., and Mousavi, Y. (2012). “Fresh and hardened properties of self-compacting concrete containing metakaolin.” Constr. Build. Mater., 35, 752–760.
Malhotra, V. M. (1993). “Fly ash, slag, silica fume, and rice-husk ash in concrete: A review.” Concr. Int., 15(4), 23–28.
Mohseni, E., Khotbehsara, M. M., Naseri, F., Monazami, M., and Ranjbar, M. M. (2016a). “Polypropylene fiber reinforced cement mortars containing rice husk ash and nano-alumina.” Constr. Build. Mater., 111, 429–439.
Mohseni, E., Miyandehi, B. M., Yang, J., and Yazdi, M. A. (2015). “Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash.” Constr. Build. Mater., 84, 331–340.
Mohseni, E., Naseri, F., Amjadi, R., Khotbehsara, M. M., and Ranjbar, M. M. (2016d). “Microstructure and durability properties of cement mortars containing nano-TiO2 and rice husk ash.” Constr. Build. Mater., 114, 656–664.
Murali, G., and Sruthee, P. (2012). “Experimental study of concrete with metakaolin as partial replacement of cement.” Int. J. Emerging Trends Eng. Dev., 4(2), 344–348.
Naji Givi, A., Abdul Rashid, S., Aziz, F. A. N., and Salleh, M. A. M. (2010). “Contribution of rice husk ash to the properties of mortar and concrete: A review.” J. Am. Sci., 6(3), 157–165.
Parande, A. K., Babu, B. R., Karthik, M. A., Kumaar, K. K. D., and Palaniswamy, N. (2008). “Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar.” Constr. Build. Mater., 22(3), 127–134.
Patel, P. A., Desai, A. K., and Desai, J. A. (2012). “Evaluation of engineering properties for polypropylene fibre reinforced concrete.” Int. J. Adv. Eng. Technol., 3(1), 42–45.
Poon, C. S., Lam, L., Kou, S. C., Wong, Y. L., and Wong, R. (2001). “Rate of pozzolanic reaction of metakaolin in high-performance cement pastes.” Cem. Concr. Res., 31(9), 1301–1306.
Rashad, M. A. (2013). “A synopsis about the effect of nano-Al2O3, nano-Fe2O3, nano-Fe3O4 and nano-clay on some properties of cementitious materials—A short guide for Civil Engineer.” Mater. Des., 52, 143–157.
Shatat, M. R. (2013). “Hydration behavior and mechanical properties of blended cement containing various amounts of rice husk ash in presence of metakaolin.” Arabian J. Chem., 9, S1869–S1874.
Shi, Z., Shui, Z., Li, Q., and Geng, H. (2015). “Combined effect of metakaolin and sea water on performance and microstructures of concrete.” Constr. Build. Mater., 74, 57–64.
Siddique, R., and Klaus, J. (2009). “Influence of metakaolin on the properties of mortar and concrete: A review.” Appl. Clay Sci., 43(3–4), 392–400.
Vejmelkova, E., Pavlíková, M., Keppert, M., Keršner, Z., Rovnaníková, P., and Ondráček, M. (2010) “High performance concrete with Czech metakaolin: Experimental analysis of strength, toughness and durability characteristics.” Constr. Build. Mater., 24(8):1404–1411.
Weng, T. L., Lin, W. T., and Cheng, A. (2013). “Effect of metakaolin on strength and efflorescence quantity of cement-based composites.” Sci. World J., 2013, 11–41.
Wild, S., Khatib, J. M., and Jones, A. (1996). “Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete.” Cem. Concr. Res., 26(10), 1537–1544.
Yan, H., Sun, W., and Chen, H. (1999) “The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete” Cem. Concr. Res., 29(3), 423–426.
Yazıcı, S. H., Arel, S. and Anuk, D. (2014). “Influences of metakaolin on the durability and mechanical properties of mortars.” Arabian J. Sci. Eng., 39(12), 8585–8592.
Zheng, Z., and Feldman, D. (1995). “Synthetic fibre-reinforced concrete.” Prog. Polym. Sci., 20(2), 185–210.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 30, 2015
Accepted: Oct 26, 2016
Published ahead of print: Mar 21, 2017
Published online: Mar 22, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 22, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.