Mechanical Characterization of a Polyurethane-Cement Hybrid Foam in Compression, Tension, and Shear
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 2
Abstract
The mechanical properties of a polyurethane-cement hybrid foam are investigated. The hybrid foam, based on the combined, synergic use of rigid polyurethane foam and portland cement, was introduced for application in the building field. Thermal and acoustic insulation properties, water vapor permeability, and the fire resistance of the material have been reported in previous works. Here, a broad mechanical characterization including compressive, tensile, and shear tests is conducted according to ASTM standard methods for cellular plastic materials. The compressive tests show a brittle behavior of the hybrid foam, with the maximum strength achieved at large values of strain, compared to concrete. The material exhibits more strength under tension than under compression. The shear resistance values are similar to those of other building materials generally used for nonstructural components, i.e., cellular concrete and bricks. Finally, by comparing the physical properties of the hybrid foam with those of bricks and cellular concrete it is possible to highlight that the lightweight features of the former, associated with appreciable mechanical properties, make it suitable for building nonstructural components, also in seismic zones.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support of Regione Campania (funds P.O.R. Campania F.S.E. 2007–2013 CUP E65E12000150006) and Hypucem S.r.l. for supplying the materials are gratefully acknowledged.
References
ASTM. (2003a). “Standard test method for compressive properties of rigid cellular plastics.” ASTM D1621-00, West Conshohocken, PA.
ASTM. (2003b). “Standard test method for tensile and tensile adhesion properties of rigid cellular plastics.” ASTM D1623-03, West Conshohocken, PA.
ASTM. (2012). “Standard test method for shear properties of composite materials by the V-notched beam method.” ASTM D5379, West Conshohocken, PA.
ASTM. (2014). “Standard practice for mechanical mixing of hydraulic cement pastes and mortar of plastic consistency.” ASTM C305, West Conshohocken, PA.
Bertero, R. D., and Bertero, V. V. (2002). “Performance-based seismic engineering: The need for a reliable conceptual comprehensive approach.” Earth Eng. Struct. Dyn., 31(3), 627–652.
Braga, F., Manfredi, V., Masi, A., Salvatori, A., and Vona, M. (2011). “Performance of non-structural elements in RC buildings during the L’Aquila, 2009 earthquake.” Bull. Earthquake Eng., 9(1), 307–324.
Decanini, L., Mollaioli, F., Mura, A., and Saragoni, R. (2004). “Seismic performance of masonry infilled r/c frames.” Proc., 13th World Conf. on Earthquake Engineering, Mira digital publishing, Vancouver, BC, Canada.
Dolšek, M., and Fajfar, P. (2008a). “The effect of masonry infills on the seismic response of a four storey reinforced concrete frame—A probabilistic assessment.” Eng. Struct., 30(11), 3186–3192.
Dolšek, M., and Fajfar, P. (2008b). “The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame—A deterministic assessment.” Eng. Struct., 30(7), 1991–2001.
Filiatrault, A., Tremblay, R., Christopoulos, C., Folz, B., and Pettinga, D. (2013). Element of earthquake engineering and structural dynamics, 3rd Ed., Presses Internationales Polytenique, Canada.
Fülöp, L. A., and Dubina, D. (2004). “Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading—Part II: Numerical modelling and performance analysis.” Thin Walled Struct., 42(2), 339–349.
Grinfeldl, G., Gorshkov, A., and Vatin, N. (2014). “Tests results strength and thermophysical properties of aerated concrete block wall samples with the use of polyurethane adhesive.” Adv. Mater. Res., 941, 786–799.
Iannace, S., Di Maio, E., Verdolotti, L., and Larvogna, M. (2008). “A foamed polymer-inorganic binder hybrid material having controlled density e morphology, method for its preparation and uses thereof.” World Intellectual Property Organization, Switzerland.
Iosipescu, N. (1967). “New accurate procedure for single shear testing of metals.” J. Mater., 2(3), 537–566.
Kanvinde, A. M., and Deierlein, G. G. (2006). “Analytical models for the seismic performance of gypsum drywall partitions.” Earthquake Spectra, 22(2), 391–411.
Kilar, V., Koren, D., and Bokan-Bosiljkov, V. (2014). “Evaluation of the performance of extruded polystyrene boards—Implications for their application in earthquake engineering.” Polym. Test., 40, 234–244.
Landolfo, R., Fiorino, L., and Della Corte, G. (2006). “Seismic behavior of sheathed cold-formed structures: Physical tests.” J. Struct. Eng., 570–581.
Lee, T. H., Kato, M., Matsumiya, T., Suita, K., and Nakashima, M. (2007). “Seismic performance evaluation of non-structural components: Drywall partitions.” Earthquake Eng. Struct. Dyn., 36(3), 367–382.
Magliulo, G., Ercolino, M., Petrone, C., Coppola, O., and Manfredi, G. (2014a). “Emilia earthquake: The seismic performance of precast RC buildings.” Earthquake Spectra, 30(2), 891–912.
Magliulo, G., Petrone, C., Capozzi, V., Maddaloni, G., Lopez, P., and Manfredi, G. (2014b). “Seismic performance evaluation of plasterboard partitions via shake table tests.” Bull. Earthquake Eng., 12(4), 1657–1677.
Miranda, E., Mosqueda, G., Retamales, R., and Peckcan, G. (2012). “Performance of nonstructural components during the 27 February 2010 Chile earthquake.” Earthquake Spectra, 28(S1), S453–S471.
Pacheco-Torgal, F. (2014). “Eco-efficient construction and building materials research under the EU framework programme Horizon 2020.” Constr. Build. Mater., 51, 151–162.
Papadopoulos, A. M., and Giama, E. (2007). “Environmental performance evaluation of thermal insulation materials and its impact on the building.” Build. Environ., 42(5), 2178–2187.
Petrone, C., Magliulo, G., Lopez, P., and Manfredi, G. (2015a). “Seismic fragility of plasterboard partitions via in-plane quasi-static tests.” Earthquake Eng. Struct. Dyn., 44(14), 2589–2606.
Petrone, C., Magliulo, G., and Manfredi, G. (2014). “Shake table tests for the seismic assessment of hollow brick internal partitions.” Eng. Struct., 72, 203–214.
Petrone, C., Magliulo, G., and Manfredi, G. (2015b). “Seismic demand on light acceleration-sensitive nonstructural components in European reinforced concrete buildings.” Earthquake Eng. Struct. Dyn., 44(8), 1203–1217.
Restrepo, J. I., and Bersofsky, A. M. (2011). “Performance characteristics of light gage steel stud partition walls.” Thin Walled Struct., 49(2), 317–324.
Silva, P. F., Yu, P. Y., and Nanni, A. (2008). “Monte Carlo simulation of shear capacity of URM walls retrofitted by polyurea reinforced GFRP grids.” J. Compos. Constr., 405–415.
Taghavi, S., and Miranda, E. (2003). “Response assessment of nonstructural building elements.”, College of Engineering, Univ. of California, Berkeley, CA.
Tam, C. T., Lim, T. Y., Ravindrarajah, R. S., and Lee, S. L. (1987). “Relationship between strength and volumetric composition of moist-cured cellular concrete.” Mag. Concr. Res., 39(138), 12–18.
Tanganelli, M., Viti, S., De Stefano, M., and Reinhorn, A. (2013). “Influence of infill panels on the seismic response of existing RC buildings: A case study.” Chapter 9, Geotechnical geological and earthquake engineering. Seismic behaviour and design of irregular and complex civil structures, O. Lavan and M. De Stefano, eds., Vol. 24, Springer, Netherlands, 119–133.
Verdolotti, L., Di Maio, E., Forte, G., Larvogna, M., and Iannace, S. (2010). “Hydration-induced reinforcement of polyurethane-cement foams: Solvent resistance and mechanical properties.” J. Mater. Sci., 45(12), 3388–3391.
Verdolotti, L., Di Maio, E., Larvogna, M., Iannace, S., and Nicolais, L. (2008). “Polyurethane-cement-based foams: Characterization and potential uses.” J. Appl. Polym. Sci., 107(1), 1–8.
Verdolotti, L., Di Maio, E., Lavorgna, M., and Iannace, S. (2012). “Hydration-induced reinforcement of rigid polyurethane-cement foams: Mechanical and functional properties.” J. Mater. Sci., 47(19), 6948–6957.
Verdolotti, L., Larvogna, M., Di Maio, E., and Iannace, S. (2013). “Hydration-induced reinforcement of rigid polyurethane-cement foams: The effect of the co-continuous morphology on the thermal-oxidative stability.” Polym. Degrad. Stab., 98(1), 64–72.
Walrath, D. E., and Adams, D. F. (1983). “The Iosipescu shear test as applied to composite materials.” Exp. Mech., 23(1), 105–110.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 11, 2016
Accepted: Jun 28, 2016
Published online: Sep 2, 2016
Published in print: Feb 1, 2017
Discussion open until: Feb 2, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.