Asphalt Binder Adaption for Climatic Conditions in Cold Regions: Alaska Experience
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 1
Abstract
Asphalt binder adaptation in cold and spacious areas such as Alaska is critical because of varying climates and seasonal extreme conditions. To fully address the binder selection issues in Alaska, this paper presents a study that conducted analysis based on a long-term pavement performance (LTPP) database to reveal the climatic effects on binder selection, followed by evaluation of the laboratory and field performance of hot mix asphalt (HMA) containing neat binder and several currently used modified binders in Alaska. It was found that the recommended high performance grading (PG) grades for the entire Alaska are equal to or lower than 52°C, whereas the low grades in more than 76% of the recorded weather stations in Alaska are recommended to be lower than . Laboratory testing results showed that HMA with high-end modified binders expressed higher rutting resistance than that containing the neat binder PG 52-28, and HMA with the neat binder displayed the lowest resistance to low-temperature cracking compared to modified binders. Field surveys suggested that increasing high temperature grade would improve rutting resistance in Alaska Department of Transportation and Public Facilities (ADOT&PF)’s Central Region, although there was not enough evidence to draw any conclusion on modified binders’ low-temperature performance in the Northern Region. It is recommended to keep using high-end modified binders in the Central Region and extend the low PG grade to and/or in trial projects in the Northern Region. In addition, more field projects covering different low-end modified binder grades in the Northern Region should be developed for better evaluation of low-temperature performance in that area. Furthermore, a systematic study of highly modified binders through both laboratory tests and field project monitoring is needed to provide more performance data and information for ADOT&PF to fully develop specifications of modified binders to better address the extremely climatic conditions in Alaska.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2011a). “Determining rutting susceptibility of hot mix asphalt (HMA) using the asphalt pavement analyzer (APA).” AASHTO T 340-10, Washington, DC.
AASHTO. (2011b). “Determining the creep compliance and strength of hot mix asphalt (HMA) using the indirect tensile test device.” Washington, DC.
AASHTO. (2011c). “Determining the dynamic modulus and flow number for hot mix asphalt (HMA) using the asphalt mixture performance tester (AMPT).” AASHTO TP 79, Washington, DC.
AASHTO. (2013). “Standard specification for performance-graded asphalt binder.” AASHTO M 320-10, Washington, DC.
Ahmed, M. J. (2008). “Analysis of rutting for anchorage pavements.” M. Sc. thesis, Univ. of Alaska Fairbanks, Fairbanks, AK.
Aschenbrener, T. B. (1992). “Investigation of the rutting performance of pavements in Colorado.”, Colorado Dept. of Transportation, Denver.
Brown, E. R. (1990). “Density of asphalt concrete-how much is needed?” Transp. Res. Rec., 1282, 27–32.
FHWA (Federal Highway Administration). (2015). “LTPP_products.” 〈http://www.fhwa.dot.gov/research/tfhrc/programs/infrastructure/pavements/ltpp/product.cfm〉 (Jun. 2, 2015).
Hajj, E. Y., Ulloa Calderon, A. E., Siddharthan, R. V., and Sebaaly, P. E. (2010). “Characteristics of the loading pulse for the flow number performance test.” J. Assoc. Asphalt Paving Technol., 79, 253–294.
Li, P., and Liu, J. (2014). “Characterization of Alaskan HMA mixtures with the simple performance tester.”, Alaska Univ. Transportation Center, Fairbanks, AK.
Liu, J. (2010). “Evaluation of warm mix asphalt for Alaska conditions.”, Alaska Univ. Transportation Center, Fairbanks, AK.
Liu, J., and Li, P. (2011). “Low temperature performance of Sasobit-modified warm-mix asphalt.” J. Mater. Civ. Eng., 57–63.
McHattie, R. (2001). “Cost-effective rut repair methods.” Alaska Dept. of Transportation and Public Facilities, Juneau, AK.
McHattie, R., and Conner, B. (1980). “Pavement structure evaluation of Alaskan highways.”, Alaska Dept. of Transportation and Public Facilities, Fairbanks, AK.
Miller, J. A., and Whitehead, R. L., Gingerich, S. B., Oki, D. S., and Olcott, P. G. (1999). “Ground Water Atlas of the United States: Segment 13, Alaska, Hawaii, Puerto Rico, and the U.S. Virgin Islands, HA 730-N.” 〈https://pubs.er.usgs.gov/publication/ha730N〉 (Jul. 2015).
Miller, J. S., and Bellinger, W. Y. (2014). Distress identification manual for the long-term pavement performance program, 5th Revised Ed., Federal Highway Administration, McLean, VA.
Mullin, A., Liu, J., and McHattie, R. (2014). “Field evaluation of crack sealing of AC pavements in Alaska.” Proc., Int. Symp. of Climatic Effects on Pavement and Geotechnical Infrastructure 2013, ASCE, Reston, VA.
Pavement Systems LLC. (2005). “LTPPBIND version 3.1 beta.” 〈http://www.fhwa.dot.gov/research/tfhrc/programs/infrastructure/pavements/ltpp/install.cfm〉 (Sep. 15, 2005).
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., and Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design, and construction, National Asphalt Pavement Association Education Foundation, Lanham, MD.
Saboundjian, S., Liu, J., Li, P., and Brunette, B. (2011). “Late-season paving of a low-volume road with warm-mix asphalt: An Alaskan experience.” Transp. Res. Rec., 2205, 40–47.
Skok, E., Johnson, E., and Turk, A. (2002). “Asphalt pavement analyzer (APA) evaluation.”, Univ. of Minnesota, Minneapolis.
Sousa, J. B., Craus, J., and Monismith, C. L. (1991). “Summary report on permanent deformation in asphalt concrete.”, Strategic Highway Research Program, National Research Council, Washington, DC.
Tonya, B. (2009). “Low temperature pavement performance in the northern region of Alaska.” Univ. of Alaska Fairbanks, Fairbanks, AK.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Mar 1, 2016
Accepted: Jun 8, 2016
Published online: Aug 1, 2016
Published in print: Jan 1, 2017
Discussion open until: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.