Cyclic Behavior and Liquefaction Potential of Renusagar Pond Ash Reinforced with Geotextiles
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 11
Abstract
In this study, cyclic behavior and dynamic properties of Renusagar pond ash samples reinforced with geotextiles have been studied. Pond ash samples were collected from the upstream side of the pond ash embankment. Laboratory tests have been carried out to obtain the material properties of the pond ash. Strain-controlled cyclic triaxial tests have been carried out on reconstituted pond ash samples with and without geotextiles, at varying confining pressures (70, 100, and 150 kPa), loading frequencies (1 and 0.5 Hz), and cyclic shear-strain amplitudes (0.5, 0.8, and 1.05%). The woven geotextiles were used as reinforcing materials, which were placed in the pond ash samples in one and three layers. Results show that the pond ash samples reinforced with geotextiles exhibit better friction angle, drainage properties, and liquefaction resistance. It may be concluded that pond ash reinforced with geotextiles can be used effectively as embankment construction material.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anubhav, and Basudhar, P. K. (2010). “Modeling of soil–woven geotextile interface behavior from direct shear test results.” Geotext. Geomembr., 28(4), 403–408.
ASTM. (1992). “Standard test method for load controlled cyclic triaxial strength of soil.” ASTM D5311-92, West Conshohocken, PA.
ASTM. (1996). “Standard test methods for the determination of the modulus and damping properties of soils using the cyclic triaxial test apparatus.” ASTM D3999-91, West Conshohocken, PA.
Boominathan, A., and Hari, S. (2002). “Liquefaction strength of flyash reinforced with randomly distributed fibers.” Soil Dyn. Earthquake Eng., 22(9–12), 1027–1033.
Bureau of Indian Standards. (1980a). “Test for soils for determination of water content—Dry density relation using light weight compaction (reaffirmed 2011).”, New Delhi, India.
Bureau of Indian Standards. (1980b). “Tests for soils for determination of specific gravity (reaffirmed 2002).”, New Delhi, India.
Bureau of Indian Standards. (1981). “Determination of shear strength parameters of soil from consolidated undrained triaxial compression test with measurement of pore water pressure (reaffirmed 2002).”, New Delhi, India.
Bureau of Indian Standards. (1985a). “Test for soils for determination of liquid limit and plastic limit (reaffirmed 2006).”, New Delhi, India.
Bureau of Indian Standards. (1985b). “Tests for soils for grain size analysis (reaffirmed 2006).”, New Delhi, India.
Chandrasekaran, B., Broms, B. B., and Wong, K. S. (1989). “Strength of fabric reinforced sand under axisymmetric loading.” Geotext. Geomembr., 8(4), 293–310.
Dey, A. K., and Gandhi, S. R. (2008). “Evaluation of liquefaction potential of pond ash.” Proc., 2nd Int. Conf. on Geotechnical Engineering for Disaster Mitigation and Rehabilitation, Springer, Berlin, 315–320.
Dhadse, S., Kumari, P., and Bhagia, L. J. (2008). “Flyash characteristics, utilization and government initiatives in India: A review.” J. Sci. Ind. Res., 67(1), 11–18.
Idriss, I. M., Dobry, R., and Singh, R. D. (1978). “Nonlinear behavior of soft clays during cyclic loading.” J. Geotech. Eng. Div., 104(12), 1427–1447.
Jakka, R. S., Datta, M., and Ramana, G. V. (2010a). “Liquefaction behavior of loose and compacted pond ash.” Soil Dyn. Earthquake Eng., 30(7), 580–590.
Jakka, R. S., Ramana, G. V., and Datta, M. (2010b). “Shear strength characteristics of loose and compacted pond ash.” Geotech. Geol. Eng., 28(6), 763–778.
Kim, B., Prezzi, M., and Salgado, R. (2005). “Geotechnical properties of flyash and bottom ash mixtures for use in high way embankments.” J. Geotech. Geoenviron. Eng., 914–924.
Koerner, R. M. (2005). Designing with geosynthetics, 5th Ed., Prentice Hall, Upper Saddle River, NJ.
Mohanty, B., Patra, N. R., and Chandra, S. (2010). “Cyclic triaxial behavior of pond ash.” GeoFlorida 2010: Advances in Analysis, Modeling & Design, ASCE, Reston, VA, 833–841.
Mohanty, S., and Patra, N. R. (2014). “Cyclic behavior and liquefaction potential of Indian pond ash located in seismic zones III and IV.” J. Mater. Civ. Eng., 06014012.
Newcomb, D. E., and Birgisson, B. (1999). Measuring in situ mechanical properties of pavement subgrade soils, National Academy Press, Washington, DC.
Pandian, N. S. (2004). “Flyash characterization with reference to geotechnical applications.” J. Indian Inst. Sci., 84(6), 189–216.
Perlea, V. G., Koester, J., and Prakash, S. (1999). “How liquefiable are cohesive soils?” Proc., 2nd Int. Conf. on Earthquake Geotechnical Eng., Vol. 2, International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE), Lisbon, Portugal, 611–618.
Silver, M. L., et al. (1976). “Cyclic triaxial strength of saturated test sand.” J. Geotech. Eng., 102(5), 511–523.
Sridharan, A., Pandian, N. S., and Rajsekharan, C. (1996). “Geotechnical characterization of pond ash.” Ash ponds and ash disposal systems, Narosa Publishing House, New Delhi, India, 97–110.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 1, 2015
Accepted: Feb 29, 2016
Published online: Jun 3, 2016
Published in print: Nov 1, 2016
Discussion open until: Nov 3, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.