Influence of Sequence Structure of Polycarboxylate Superplasticizers on Early Age Properties of Cement Paste
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 10
Abstract
Different polycarboxylate (PC) superplasticizers have been successfully synthesized by varying side-chain density as well as sequence structure through free radical polymerization and reversible addition-fragmentation chain transfer polymerization (RAFT), respectively. Characteristic connections between molecular structure and early age properties of cement paste have been systematically evaluated by various methods, such as adsorption, flowability, calorimetric measurements, amount of hydration product, and dissolution of cement grains. The results show that block PC adsorbs faster with a larger adsorption amount onto cement particle surfaces than random PC, thereby having a better initial flowability and faster loss of workability. Moreover, the dormant period of cement paste with block PC could be effectively shortened by 3 h with block PC as well as the onset of the acceleratory period could be promoted. The results from X-ray diffraction (XRD)-Rietveld refinement show that block PC promotes both and reaction than that of random PC. In addition, a larger number of clusters of C-S-H is formed on the cement particle surfaces at the very early age with block PC and then C-S-H clusters developed a continuous structure with prolonged time, which may increase the early strength of cement paste. Furthermore, the dissolution rate of cement minerals is drastically faster with block PC compared with random PC. All these findings are helpful not only for understanding the relationship of the molecular structure of PC and the early age properties of cement paste, but also further designing the optimum molecular structure of PC to meet the requirement of continuous materials with early strength.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (51408272, 51272100, 51278232) and Natural Science Fund for Distinguished Youth Scholars of Jiangsu Province (BK20130048).
References
Bouhamed, H., Magnin, A., and Boufi, S. (2006). “Alumina interaction with AMPS-MPEG random copolymers III: Effect of PEG segment length on adsorption, electrokinetic and rheological behavior.” J. Colloid Interface Sci., 298(1), 238–247.
Cheung, J., Jeknavorian, A., Roberts, L., and Silva, D. (2011). “Impact of admixtures on the hydration kinetics of portland cement.” Cem. Concr. Res., 41(12), 1289–1309.
Damidot, D., Nonat, A., and Barret P. (1990). “Kinetics of tricalcium silicate hydration in diluted suspensions by microcalorimetric measurements.” J. Am. Ceram. Soc., 73(11), 3319–3322.
Dove, P. M., and Han, N. (2007). “Kinetics of mineral dissolution and growth as reciprocal microscopic surface processes across chemical driving force.” AIP Conf. Proc., Waikoloa, HI, 215–234.
Jansen, D., Neubauer, J., Goetz-Neunhoeffer, F., Haerzschel, R., and Hergeth, W. D. (2012). “Change in reaction kinetics of a portland cement caused by a superplasticizer—Calculation of heat flow curves from XRD data.” Cem. Concr. Res., 42(2), 327–332.
Kashchiev, D., and Van, R. G. M. (2003). “Review: Nucleation in solutions revisited.” Cryst. Res. Technol., 38(78), 555–574.
Mollah, M. Y. A., Adams, W. J., Schennach, R., Cocke, D. L. (2000). “A review of cement-superplasticizer interactions and their models.” Adv. Cem. Res., 12(4), 153–161.
Nonat, A., Mutin, J. C., Lecoq, X., and Jiang, S. P. (1997). “Physico-chemical parameters determining hydration and particle interactions during the setting of silicate cements.” Solid State Ionics, 101–103(11), 923–930.
NSPRC (National Standards of People’s Republic of China). (2000). “Method for testing uniformity of concrete admixture.” GB/T8077-2000, China.
Plank, J., and Sachsenhauser, B. (2009). “Experimental determination of the effective anionic charge density of polycarboxylate superplasticizers in cement pore solution.” Cem. Concr. Res., 39(1), 1–5.
Ran, Q. P., Somasundaran, P., Miao, C. W., Liu, J. P., Wu, S. S., and Shen, J. (2009). “Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions.” J. Colloid Interface Sci., 336(2), 624–633.
Ran, Q. P., Wang, X. M., Shu, X., Zhang, Q., Yang, Y., and Liu, J. P. (2015). “Effects of sequence structure of polycarboxylate superplasticizers on the dispersion behavior of cement paste.” J. Disper. Sci. Technol., 37(3), 431–441.
Rinaldi, D., et al. (2009). “RAFT copolymerization of methacrylic acid and poly(ethylene glycol) methyl ether methacrylate in the presence of a hydrophobic chain transfer agent inorganic solution and in water.” J. Polym. Sci. Polym. Chem., 47(12), 3045–3055.
Sakai, E., Ishida, A., and Ohta, A. (2006). “New trends in the development of chemical admixtures in Japan.” J. Adv. Concr. Technol., 4(2), 211–223.
Sakai, E., Yamada, K., and Ohta, A. (2003). “Molecular structure and dispersion-adsorption mechanisms of comb-type superplasticizers used in Japan.” J. Adv. Concr. Technol., 1(1), 16–25.
Scrivener, K. L., Füllmann, T., Gallucci, E., Walenta, G., and Bermejo, E. (2004). “Quantitative study of portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods.” Cem. Concr. Res., 34(9), 1541–1547.
Uchikawa, H., Hanehara, S., and Sawaki, D. (1997). “The role of steric repulsive force in the dispersion of cement particles in fresh paste prepared with organic admixture.” Cem. Concr. Res., 27(1), 37–50.
Wei, Y., Yao, W., Xing, X., and Wu, M. J. (2012). “Quantitative evaluation of hydrated cement modified by silica fume using QXRD, 27Al MAS NMR, TG-DSC and selective dissolution techniques.” Constr. Build. Mater., 36(1), 925–932.
Winnefeld, F., Becker, S., Pakusch, J., and Götz, T. (2007). “Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems.” Cem. Concr. Comp., 29(4), 251–262.
Yamada, K., Takahashi, T., Hanehara, S., and Matsuhisa, M. (2000). “Effects of chemical structure on the properties of polycarboxylate-type superplasticizer.” Cem. Concr. Res., 30(2), 197–207.
Zingg, A., Winnefeld, F., Holzer, L., Pakusch, J., Becker, S., and Figi, R. (2009). “Interaction of polycarboxylate based superplasticizers with cements containing different amounts.” Cem. Concr. Comp., 31(3), 153–162.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 1, 2015
Accepted: Feb 23, 2016
Published online: May 23, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 23, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.