Evaluation of a Wood-Strand Molded Core Sandwich Panel
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 9
Abstract
Green building practices have created an opportunity for the forest products industry to become a leader in the creation of innovative building products derived from renewable materials. In other industries, sandwich composites have proven to be efficient structures by meeting structural demands of traditional panel products while consuming less material. A prototype molded-core sandwich panel made of span-rated oriented strand board (OSB) facings and a bidirectional molded wood-strand core was produced. Critical mechanical properties were evaluated to determine the feasibility of this product for use in building applications. The goals of this study were to generate details on structural performance of the product, validate the design, and provide suggestions for future product development. Results indicate that this molded-core panel performs particularly well in flexure while connection properties had the largest scope for improvement. Sufficient performance was observed to validate the design, warranting production and testing of panels sized for end-use. Future product development should explore different connection systems, perform detailed engineering analyses of the mechanical properties necessary for complete structural design, and characterize physical properties of the panel.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The laboratory assistance of Milo Clauson is greatly appreciated.
References
AFPA (American Forest and Paper Association). (2012a). “ASD/LRFD Manual for engineered wood construction.” Washington, DC.
AFPA (American Forest and Paper Association). (2012b). “National design specification (NDS) for wood construction.” Washington, DC.
Alldritt, K., Sinha, A., and Miller, T. (2014). “Designing a strand orientation pattern for improved shear properties of oriented strand board.” J. Mater. Civ. Eng., 04014022.
ASTM. (2009). “Standard test methods for small clear specimens of timber.” ASTM D143, West Conshohocken, PA.
ASTM. (2011). “Standard test methods for structural panels in flexure.” ASTM D3043, West Conshohocken, PA.
ASTM. (2012a). “Standard practice for static load test for shear resistance to framed walls for buildings.” ASTM E564, West Conshohocken, PA.
ASTM. (2012b). “Standard test methods for mechanical fasteners in wood.” ASTM D1761, West Conshohocken, PA.
ASTM. (2013a). “Standard test method for evaluating dowel-bearing strength of wood and wood-based products.” ASTM D5764, West Conshohocken, PA.
ASTM. (2013b). “Standard test methods for structural panels in shear through-the-thickness”. ASTM D2719, West Conshohocken, PA.
Breyer, D., Cobeen, K., Fridley, K., and Pollock, D. (2015). Design of wood structures—ASD/LRFD, McGraw Hill Education, Columbus, OH.
Carlsson, L., and Kardomateas, G. (2011). Structural and failure mechanics of sandwich composites, Springer, New York.
Correlated Solutions. (2009). “Vic-3D.” Irmo, SC.
Hunt, J., and Winandy, J. E. (2002). “3D engineered fiberboard: A new structural building product.” Proc., 6th European Panel Products Symp., Session 2: New Products, BioComposites Centre, Bangor, U.K., 106–117.
Hunt, J., and Winandy, J. E. (2003). “3D engineered fiberboard: Engineering analysis of a new building product.” Proc., EcoComp, Queen Mary, Univ. of London, London, 1–8.
Jayne, B. (1972). Theory and design of wood and fiber composite materials, Syracuse University Press, Syracuse, NY.
Johansen, K. (1949). “Theory of timber connectors.” Int. Assoc. Bridges Struct. Eng., 9, 249–262.
Kent, S. (2004). “The effect of biological deterioration on the performance of nailed oriented strand board sheathing to Douglas-fir framing member connections.” Ph.D. thesis, Oregon State Univ., Corvallis, OR.
Kramer, A., Barbosa, A., and Sinha, A. (2014). “Viability of hybrid poplar in ANSI approved cross-laminated timber applications.” J. Mater. Civ. Eng., 06014009.
McCutcheon, W. (1985). “Racking deformation in wood shear walls.” J. Struct. Eng., 257–269.
Nazerian, M., and Moazami, V. (2015). “Bending strength of sandwich-type particleboard manufactured from giant reed (Arundo donax).” For. Prod. J., 65(5/6), 292–300.
Puettmann, M., and Wilson, J. (2006). “Life-cycle analysis of wood products: Cradle-to-gate LCI of residential wood building materials.” Wood Fiber Sci., 37, 18–29.
Ramamurthy, K., Junhanandan Nambiar, E. K., and Indu Siva Ranjani, G. (2009). “A classification of studies on properties of foam concrete.” Cem. Concr. Compos., 31(6), 388–396.
R Core Team. (2015). “A language and environment for statistical computing.” Vienna, Austria.
Salenikovich, A., and Dolan, J. D. (2003). “The racking performance of shear walls with various aspect ratios. 1. Monotonic tests of fully anchored walls.” For. Prod. J., 53(10), 65–73.
Schwarzkopf, M., Muszynski, L., and Nairn, J. (2013). “Steromicroscopic optical method for the assessment of load transfer patterns across the adhesive bondline interphase.” Proc., 2013 Int. Conf. on Wood Adhesives, Forest Products Society, Toronto, 100–109.
Shrestha, D. (1999). “Shear properties test of oriented strand board panels.” Forest Prod. J., 49(10), 41–46.
Singh, S. P., Burgess, G., and Singh, J. (2008). “Performance comparison of thermal insulated packaging boxes, bags, and refrigerants for single-parcel shipments.” Package Technol. Sci., 21(1), 25–35.
Sinha, A., and Gupta, R. (2009). “Strain distribution in OSB and GWB in wood-frame shear walls.” J. Struct. Eng., 666–675.
Sinha, A., Gupta, R., and Kutnar, A. (2013). “Sustainable development and green buildings.” Drvna Industrija, 64(1), 45–53.
Sinha, A., Gupta, R., and Nairn, J. (2011). “Thermal degradation of lateral yield strength of nailed wood connections.” J. Mater Civ. Eng., 812–822.
Strong, A. B. (2008). Fundamentals of composites manufacturing: Materials, methods, and applications, Society of Manufacturing Engineers, Dearborn, MI.
Sutton, M., Orteu, J. J., and Schreier, H. (2009). Image correlation for shape, motion and deformation measurements: Basic concepts, theory and applications, Springer, New York.
Voth, C. (2009). “Lightweight sandwich panels using small-diameter timber wood-strands and recycled newsprint cores.” M.Sc. thesis, Washington State Univ., Pullman, WA.
Way, D. (2015). “Proof of concept for a three-dimensional molded core wood-strand sandwich panel.” M.Sc. thesis, Oregon State Univ., Corvallis, OR.
Yudelson, J. (2007). Green building, A to Z: Understanding the language of green building, New Society, Gabriola Island.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 15, 2015
Accepted: Jan 7, 2016
Published online: Mar 29, 2016
Discussion open until: Aug 29, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.