Laboratory and Construction Evaluation of Warm-Mix Asphalt
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 7
Abstract
Warm mix asphalt (WMA) describes various technologies that allow asphalt mixtures to be produced at lower temperatures as compared with hot mix asphalt (HMA). WMA technologies also offer improvements in workability, cost, and environmental sustainability, such as reduced fuel usage, greenhouse gas emissions, and wear and tear at plants, while enhancing worker health and safety conditions. The objective of this study was to quantify the laboratory performance of field-produced mixtures that utilize WMA technologies and to evaluate the influence of lowering the production temperature on the mixture properties in the field. To achieve this objective, three field projects across Louisiana were selected to provide eight mixtures for the evaluation of WMA technologies. Plant-produced mixtures were sampled and the laboratory performance of WMA mixtures and conventional HMA was evaluated. Further, the characteristics of WMA mixtures were compared with conventional HMA mixtures during production and construction. Based on the results of the experimental program, it was concluded that there was no difference in the rutting performance of WMA compared with HMA. In addition, the use of WMA technologies improved asphalt mixture fracture resistance. With respect to moisture susceptibility, the tensile strength ratio (TSR) of the WMA mixtures was comparable to the conventional HMA in two projects; however, it was lower than the TSR criterion of 80% in the third project. During production, while the moisture content in WMA was slightly higher than the conventional mixtures, both mixture types met Louisiana’s specifications (with moisture content less than 0.3%). Further, asphalt absorption was not statistically different between HMA and WMA. During paving, the temperature of the mat was distinctly lower for WMA than for HMA. With respect to the compaction effort, there seemed to be no discernible difference in the compaction effort required for HMA and WMA. In addition, the WMA mixtures were able to meet the minimum specification requirement of 92% density in most of the cases.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was sponsored by the Louisiana Transportation Research Center (LTRC Project No. 07-1B) and LADOTD. The authors would like to express their thanks to all of those who have provided valuable help in this study.
References
AASHTO. (2001a). “Standard method of test for hamburg wheel-track testing of compacted hot mix asphalt (HMA).” AASHTO T-324, Washington, DC.
AASHTO. (2001b). “Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage.” AASHTO T-283, Washington, DC.
Australian Asphalt Pavement Association. (2001). “Warm mix asphalt—A state of the art review.” Sydney, Australia.
Diefenderfer, S. D., Hearon, A. J., and McGhee, K. K. (2008). “Installation of warm mix asphalt projects in Virginia.” 87th Transportation Research Board Annual Meeting, Transportation Research Board, Washington, DC.
FHWA. (2008). “Warm-mix Asphalt: European practice.”, U.S. Dept. of Transportation, Federal Highway Administration (FHWA), International Technology Scanning Program, Washington, DC.
Hurley, G. C., and Prowell, B. D. (2006). “Evaluation of potential processes for use in warm mix asphalt.” J. Assoc. Asphalt Paving Technol., 75, 41–90.
Jenkins, K. J., and De Groot, J. L. A. (1999). “Half-warm foamed bitumen treatment, a new process.” 7th Conf. on Asphalt Pavements for Southern Africa (CAPSA), Marmirolo, Italy.
Johnston, A., Da Silva, M., Soleymani, H., and Yeung, C. K. (2006). “An early evaluation of the initial canadian experience with warm asphalt mix.” Annual General Conf. of the Canadian Society for Civil Engineering, Calgary, AB, Canada.
Koenders, B. G., Stoker, D. A., Brown, C., Larson, O., Hardy, D., and Wilms, K. P. (2000). “Innovative process in Asphalt production and application to obtain lower operating temperature.” 2nd Eurasphalt and Eurobitume Congress, Barcelona, Spain.
Louisiana Department of Transportation and Development. (2006). “Louisiana standard specifications for roads and bridges.” Baton Rouge, LA.
Maccarrone, S., Holleran, G., and Ky, A. (1994). “Cold asphalt systems as an alternative to hot mix.” Proc., 9th Int. AAPA Conf., Surfers Paradise, QLD, Australia.
Mohammad, L. N., Raghavendra, A., Medeiros, M., Hassan, M., and King, W. (2014). “Evaluation of warm mix asphalt technology in flexible pavements.”, Louisiana Transportation Research Center, Baton Rouge, LA.
Muthen, K. M. (1998). “Foamed asphalt mixes—Mix design procedure.”, Sabita and CSIR Transportek, South Africa.
Newcomb, D. (2005). “Warm mix: The wave of the future?” HMAT, 10(4), 33–36.
Prowell, B. D., Hurley, G. C., and Crews, E. (2007). “Field performance of warm-mix asphalt at the NCAT test track.” Transportation Research Record, 1998, 96–102.
Wasiuddin, N. M., Selvamohan, S., Zaman, M. M., and Guegan, M. L. T. A. (2007). “A comparative laboratory study of Sasobit and Aspha-Min in warm mix asphalt.” 86th Transportation Research Board Annual Meeting, Transportation Research Board, Washington, DC.
West, R. (2014). “Properties and performance of warm mix asphalt technologies.”, National Cooperative Highway Research Program, Washington, DC.
Wielinski, J., Hand, A., and Rausch, D. M. (2009). “Laboratory and field evaluations of foamed warm mix asphalt projects.” 88th Transportation Research Board Annual Meeting, Transportation Research Board, Washington, DC.
Wu, Z., Mohammed, L. N., Wang, L. B., and Mull, M. (2005). “Fracture resistance characterization of superpave mixtures using a semi-circular.” J. ASTM Int., 2(3), 1–15.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 7, 2014
Accepted: Oct 14, 2015
Published online: Jan 20, 2016
Discussion open until: Jun 20, 2016
Published in print: Jul 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.