Developing Temperature-Induced Fatigue Model of Asphalt Concrete for Better Prediction of Alligator Cracking
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 5
Abstract
Currently, the fatigue performance of asphalt concrete (AC) is predicted according to repeated traffic-induced tensile strain at the bottom of AC layer. Cyclic thermal strain caused by day-night temperature fluctuation is not considered because of the fact that there is no closed-form solution or model available for calculating thermal fatigue damage. This study, for the first time, develops a closed-form equation for calculating the temperature-induced fatigue damage of AC. To generate data, beam fatigue testing was conducted on three Superpave mixtures in the laboratory. The mechanical beam fatigue test data were correlated with the actual cyclic temperature loading test data. The developed model was then calibrated for field condition. Finally, the model was used to evaluate fatigue damages of randomly chosen 34 long-term pavement performance (LTPP) test sections from 19 states in the United States. Fatigue damage determined by the traditional pavement design software (which considers traffic-induced fatigue damage only) is compared with that by the combined traffic- and temperature-induced fatigue. The results show that the error may decrease by 14% through the incorporation of temperature-induced fatigue damage in the current design approach. Therefore, it is suggested to include the temperature-induced fatigue damage in the pavement design software.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express their sincere gratitude and appreciation to the research funding provided by the New Mexico Department of Transportation (NMDOT). The authors also appreciate the help of Umme Mannan in extracting the LTPP data.
References
AASHTO. (2007). “Determining the fatigue life of compacted hot-mix asphalt subjected to repeated flexural bending.” AASHTO T321-07, Washington, DC.
AASHTO. (2008). Mechanistic-empirical pavement design guide, Washington, DC.
AASHTOware Pavement Mechanistic-Empirical Design [Computer software]. AASHTO, Washington, DC.
Carvalho, R. L., and Schwartz, C. W. (2006). “Comparisons of flexible pavement designs: AASHTO empirical versus NCHRP Project 1-37A mechanistic-empirical.” Transp. Res. Rec., 1947, 167–174.
El-Basyouny, M., and Witczak, M. (2005a). “Calibration of alligator fatigue cracking model for 2002 design guide.” Transp. Res. Rec., 1919, 77–86.
El-Basyouny, M., and Witczak, M. (2005b). “Verification of the calibrated fatigue cracking models for the 2002 design guide.” J. Assoc. Asphalt Paving Technol., 74, 653–696.
ELMOD Version 6 [Computer software]. Dynatest Consulting, Ventura, CA.
Huang, Y. (2004). Pavement analysis and design, 2nd Ed., Pearson Education International, Upper Saddle River, NJ.
Islam, M. R., Ahsan, S., and Tarefder, R. A. (2015). “Modeling temperature profile of superpave hot-mix asphalt in flexible pavement.” Int. J. Pavement Res. Technol., 8(1), 47–52.
Islam, M. R., Rahman, M. T., and Tarefder, R. A. (2012). “Laboratory investigation of the stiffness and the fatigue life of glass grid reinforced asphalt concrete.” Int. J. Pavements, 11(1), 82–91.
Islam, M. R., and Tarefder, R. A. (2015a). “A study of asphalt aging through beam fatigue test.” Transp. Res. Rec., in press.
Islam, M. R., and Tarefder, R. A. (2015b). “Coefficients of thermal contraction and expansion of asphalt concrete in the laboratory.” J. Mater. Civ. Eng., 04015020.
Islam, M. R., and Tarefder, R. A. (2015c). “Effects of large freeze-thaw cycles on stiffness and tensile strength of asphalt concrete.” J. Cold Reg. Eng., 06014006.
LTPP (Long-Term Pavement Performance Program). (2014). McLean, VA, 〈www.infopave.com〉.
NCHRP (National Cooperative Highway Research Program). (2004). “Guide for mechanistic–empirical design of new and rehabilitated pavement structures.”, Transportation Research Board, Washington, DC.
MATLAB [Computer software]. MathWorks, Natick, MA.
Prowell, B., et al. (2008). “Endurance limit of hot mix asphalt mixtures to prevent fatigue cracking in flexible pavements.”, National Cooperative Highway Research Program, Washington, DC.
Schwartz, C., Li, R., Ceylan, H., Kim, S., and Gopalakrishnan, K. (2013). “Global sensitivity analysis of mechanistic-empirical performance predictions for flexible pavements.” Transp. Res. Rec., 2368, 12–23.
Tarefder, R. A., and Barlas, G. (2013). “Determining fatigue endurance limits of New Mexico asphalt mixes for designing perpetual pavements and implementation of MEPDG to its full capacity.”, New Mexico DOT, Albuquerque, NM.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 28 • Issue 5 • May 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 29, 2014
Accepted: Sep 8, 2015
Published online: Nov 30, 2015
Discussion open until: Apr 30, 2016
Published in print: May 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.