Quality Assurance Method for Assessment of Stiffness of Pipeline Bedding Material
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 4
Abstract
An innovative quality assurance method is used to assess the stiffness of the bedding material to a water pipeline located in Texas. The method used is a combination of spectral analysis of surface waves technique (SASW) and geostatistics. SASW tests were conducted to measure the stiffness of pipeline bedding material at 15 sections along the pipeline after different curing periods of 1, 3, 7, 14, and 28 days. The stiffness measurements from SASW tests are used in geostatistical analysis to determine stiffness properties at untested locations and map the variation of stiffness values along the pipeline. The SASW measurements indicated a significant increase in mean stiffness value of bedding material from 267.5 MPa on day 1 to 442 MPa after a 28-day curing period. The geostatistical analysis predicted and mapped the stiffness of bedding material over the entire pipeline by incorporating the variability present in the known stiffness measurements. This research highlights the adaptability of geostatistics and in situ measurements in assessing the quality of the pipeline bedding material.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was conducted in cooperation with the Tarrant Regional Water District (TRWD). The authors would like to acknowledge Shelly Hattan of TRWD and Matt Gaughan of IPL team for their assistance with various research activities related to testing and coordination among various groups and research teams.
References
Abreu, D. G., Jefferson, I., Braithwaite, P. A., and Chapman, D. N. (2008). “Why is sustainability important in geotechnical engineering?” Proc., Geocongress 2008, ASCE, Reston, VA, 821–828.
ASTM. (1998). “Standard test method for particle-size analysis of soils.” ASTM D422-63, West Conshohocken, PA.
ASTM. (2005). “Standard test methods for liquid limit, plastic limit, and plasticity index of soils.” ASTM D4318-10e1, West Conshohocken, PA.
ASTM. (2007). “Standard test methods for modulus and damping of soils by resonant-column method.” ASTM D4015-07, West Conshohocken, PA.
ASTM. (2014). “Standard test method for specific gravity of soil solids by water pyconometer.” ASTM D854-14, West Conshohocken, PA.
Boschert, J., and Butler, J. (2013). “CLSM as a pipe bedding: Computing predicted load using the modified Marston equation.” Proc., ASCE Pipelines, ASCE, Reston, VA, 1201–1212.
Chittoori, B., Puppala, A. J., and Raavi, A. (2014). “Strength and stiffness characterization of controlled low-strength material using native high-plasticity clay.” J. Mater. Civ. Eng., 1–8.
Chittoori, B., Puppala, A. J., Reddy, R., and Marshall, D. (2012). “Sustainable reutilization of excavated trench material.” Proc., Geocongress, ASCE, Reston, VA, 4280–4289.
Davidović, N., and Prolović, V. (2010). “Modeling of soil parameters spatial uncertainty by geostatistics.” Facta Univ. Ser. Archit. Civ. Eng., 8(1), 111–118.
Folliard, K. J., Trejo, D., Sabol, S. A., and Leshchinsky, D. (2008). “Development of a recommended practice for use of controlled low-strength material in highway construction.”, Transportation Research Board, Washington, DC.
Isaaks, E. H., and Srivastava, R. M. (1989). An introduction to applied geostatistics, Oxford University Press, New York.
Kienow, K., and Kienow, K. (2009). “Most pipeline failures can be prevented by proper inspection.” Proc., Pipelines, ASCE, Reston, VA, 182–197.
Krige, D. G. (1951). “A statistical approach to some basic mine valuation problems on the witwatersrand.” J. Chem. Metal. Mining Soc. S. Afr., 52(6), 119–139.
Kumar, V. (2006). “Kriging of groundwater levels—A case study.” J. Spatial Hydrol., 6(1), 81–92.
Nazarian, S., and Stokoe, K. H., II. (1984). “In situ shear wave velocities from spectral analysis of surface waves.” Proc., 8th World Conf. on Earthquake Engineering, Vol. III, Prentice-Hall, Englewood Cliffs, NJ, 31–38.
Puppala, A. J., Balasubramanyam, P., and Madhyannapu, R. S. (2007). “Experimental investigations on properties of controlled low-strength material.” Ground Improv. J., 11(3), 171–178.
Puppala, A. J., and Hanchanloet, S. (1999). “Evaluation of chemical treatment method (sulphuric acid and lignin mixture) on strength and resilient properties of cohesive soils.” Proc., 78th Transportation Research Board Annual Meeting, National Research Council, National Academy of Science, Washington, DC.
Puppala, A. J., Saride, S., and Williammee, R. (2012). “Sustainable reuse of limestone quarry fines and RAP in pavement base/subbase layers.” J. Mater. Civ. Eng., 418–429.
Raavi, A. (2012). “Design of controlled low strength material for bedding and backfilling using high plasticity clay.” M.S. thesis, Univ. of Texas, Arlington, TX.
Rajah, S., McCabe, M., and Plattsmier, J. (2012). “Classification and specification of bedding and backfill for buried pipelines.” Proc., ASCE Pipelines 2012: Innovations in Design, Construction and Maintenance, ASCE, Reston, VA, 940–951.
Rajani, B., and Tesfamariam, S. (2004). “Uncoupled axial, flexural, and circumferential pipe-soil interaction analyses of partially supported jointed water mains.” Can. Geotech. J., 41(6), 997–1010.
Richart, F. E., Hall, J. R., and Woods, R. D. (1970). Vibrations of soils and foundations, Prentice-Hall, NJ.
Seica, M., and Packer, J. (2004). “Mechanical properties and strength of aged cast iron water pipes.” J. Mater. Civ. Eng., 69–77.
Stokoe, K. H., II., Rix, G. J., and Nazarian, S. (1989). “In situ seismic testing with surface waves.” Proc., 12th Int. Conf. on Soil Mechanics and Foundation Engineering, Rio De Janiero, Brazil, 331–334.
Sturges, H. A. (1926). “The choice of a class interval.” J. Am. Stat. Assoc., 21(153), 65–66.
Vennapusa, K. R. P., White, D. J., and Morris, M. D. (2010). “Geostatistical analysis for spatially referenced roller-integrated compaction measurement.” J. Geotech. Geoenviron. Eng., 813–822.
Vipulanandan, C., Qiao, W., and Hovsepian, H. (2011). “Case studies on water pipeline failures in the active zone.” Proc., Geo-Frontiers 2011 Conf., ASCE, Reston, VA, 2474–2483.
White, D. J., Thompson, M. J., Vennapusa, P., and Siekmeier, J. (2008). “Implementing intelligent compaction specification on Minnesota TH-64 synopsis of measurement values, data management, and geostatistical analysis.”, Transportation Research Board, Washington, DC, 1–9.
White, D. J., Vennapusa, P., and Gieselman, H. (2011). “Field assessment and specification review for roller-integrated compaction monitoring technologies.” Adv. Civ. Eng., 2011, 1–15.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Apr 8, 2015
Accepted: Jul 15, 2015
Published online: Oct 6, 2015
Discussion open until: Mar 6, 2016
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.