Evaluation of Powdered Scoria Rocks from Various Volcanic Lava Fields as Cementitious Material
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 3
Abstract
In this study, the large deposits of volcanic scoria rocks (SRs) of the Arabian Peninsula were investigated as cement replacement materials. The powdered SRs procured from three separate regions (SR1, SR2, and SR3) were incorporated in concrete mixtures at three replacement levels (10%, 20%,and 30%, by cement weight). Additionally, two reference concrete mixtures with silica fume (SF) and ground quartz sand (GS) were fabricated for benchmarking. Fresh properties, compressive strength, chloride-ion penetration resistance, and pore-size distribution from mercury intrusion porosimetry (MIP) were obtained. Microstructural and elemental spot analyses using field emission scanning electron microscopy (FESEM) analyses of samples from concrete mixtures were performed. The results showed that powdered SR samples exhibit clear variations in morphology and mineralogical compositions depending on the volcanic lava field. The strength activity index (SAI) of SR3 was higher than SR1 and SR2 indicating higher pozzolanic reactivity. The compressive strength of concrete mixtures incorporating SRs is affected by both SR source and its replacement level. SR mixtures yielded improved chloride-ion penetration resistance compared with GS and control mixtures but much lower than SF. The microstructural analyses revealed that SR3 particles have higher pozzolanic reactivity than SR1 and SR2.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This project was funded by the National Plan for Science, Technology and Innovation (MAARIFAH), King Abdulaziz City for Science and Technology, Kingdom of Saudi Arabia, Award Number 08-ENV 314-02.
References
Alhozaimy, A., Fares, G., Alawad, O. A., and Al-Negheimish, A. (2015). “Heat of hydration of concrete containing powdered scoria rock as a natural pozzolanic material.” Constr. Build. Mater., 81, 113–119.
Alhozaimy, A., Fares, G., Al-Negheimish, A., and Jaafar, M. S. (2013). “The autoclaved concrete industry: An easy-to-follow method for optimization and testing.” Constr. Build. Mater., 49, 184–193.
Anwar Hossain, K. M. (2009). “Resistance of Scoria-based blended cement concrete against deterioration and corrosion in mixed sulfate environment.” J. Mater. Civ. Eng., 299–308.
ASTM. (2007a). “Standard practice for making and curing concrete test specimens in the laboratory.” ASTM C192, West Conshohocken, PA.
ASTM. (2007b). “Standard specification for concrete aggregates.” ASTM C33, West Conshohocken, PA.
ASTM. (2007c). “Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete.” ASTM C138, West Conshohocken, PA.
ASTM. (2007d). “Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration.” ASTM C1202, West Conshohocken, PA.
ASTM. (2007e). “Standard test method for slump of hydraulic cement concrete.” ASTM C143, West Conshohocken, PA.
ASTM. (2007f). “Standard test methods for sampling and testing fly ash or natural pozzolans for use in Portland-cement concrete.” ASTM C311, West Conshohocken, PA.
ASTM. (2012). “Standard specification for Portland cement.” ASTM C150, West Conshohocken, PA.
ASTM. (2013). “Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens).” ASTM C109 / C109M, West Conshohocken, PA.
ASTM. (2015). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C39 / C39M, West Conshohocken, PA.
Bentz, D. P., and Stutzman, P. E. (1994). “Evolution of porosity and calcium hydroxide in laboratory concretes containing silica fume.” Cem. Concr. Res., 24(6), 1044–1050.
BS. (1986). “Testing concrete. Method for determination of compressive strength of concrete cubes.”, London, U.K.
Celik, K., et al. (2014a). “High-volume natural volcanic pozzolan and limestone powder as partial replacements for portland cement in self-compacting and sustainable concrete.” Cem. Concr. Compos., 45, 136–147.
Celik, K., Meral, C., Mancio, M., Kumar Mehta, P., and Monteiro, P. J. M. (2014b). “A comparative study of self-consolidating concretes incorporating high-volume natural pozzolan or high-volume fly ash.” Constr. Build. Mater., 67, 14–19.
Davraz, M., and Gunduz, L. (2005). “Engineering properties of amorphous silica as a new natural pozzolan for use in concrete.” Cem. Concr. Res., 35(7), 1251–1261.
Depci, T., Efe, T., Tapan, M., Özvan, A., Açlan, M., and Üner, T. (2012). “Chemical characterization of patnos scoria (Ağri, Turkey) and its usability for production of blended cement.” Physicochem. Probl. Miner. Process., 48(1), 303–315.
Ezziane, K., Bougara, A., Kadri, A., Khelafi, H., and Kadri, E. (2007). “Compressive strength of mortar containing natural pozzolan under various curing temperature.” Cem. Concr. Compos., 29(8), 587–593.
Ghrici, M., Kenai, S., and Said-Mansour, M. (2007). “Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements.” Cem. Concr. Compos., 29(7), 542–549.
Hewlett, P. (2003). Lea’s chemistry of cement and concrete, Butterworth-Heinemann, Oxford, U.K.
Ishida, T., Miyahara, S., and Maruya, T. (2008). “Chloride binding capacity of mortars made with various Portland cements and mineral admixtures.” J. Adv. Concr. Technol., 6(2), 287–301.
Kadri, E. H., and Duval, R. (2009). “Hydration heat kinetics of concrete with silica fume.” Constr. Build. Mater., 23(11), 3388–3392.
Kaid, N., Cyr, M., Julien, S., and Khelafi, H. (2009). “Durability of concrete containing a natural pozzolan as defined by a performance-based approach.” Constr. Build. Mater., 23(12), 3457–3467.
Khan, M. I., and Alhozaimy, A. (2010). “Properties of natural pozzolan and its potential utilization in environmental friendly concrete.” Can. J. Civ. Eng., 38(1), 71–78.
Kouloumbi, N., Batis, G., and Pantazopoulou, P. (1995). “Efficiency of natural greek pozzolan in chloride-induced corrosion of steel reinforcement.” Cem. Concr. Aggr., 17(1), 18–25.
Malhotra, V. M., and Mehta, P. K. (1996). Pozzolanic and cementitious materials, Taylor and Francis, New York.
Mehta, P. K. (1981). “Studies on blended portland cement containing Santorin earth.” Cem. Concr. Res., 11(4), 507–518.
Mehta, P. K., and Monteiro, P. J. (2006). Concrete: Microstructure, properties, and materials, McGraw-Hill, New York.
Moufti, M. R., Sabtan, A. A., El-Mahdy, O. R., and Shehata, W. M. (2000). “Assessment of the industrial utilization of scoria materials in central Harrat Rahat, Saudi Arabia.” Eng. Geol., 57(3–4), 155–162.
Pourkhorshidi, A. R., Najimi, M., Parhizkar, T., Jafarpour, F., and Hillemeier, B. (2010). “Applicability of the standard specifications of ASTM C618 for evaluation of natural pozzolans.” Cem. Concr. Compos., 32(10), 794–800.
Shannag, M. (2000). “High strength concrete containing natural pozzolan and silica fume.” Cem. Concr. Compos., 22(6), 399–406.
Tagnit-Hamou, A., Petrov, N., and Luke, K. (2003). “Properties of concrete containing diatomaceous earth.” ACI Mater. J., 100(1), 73–78.
Talbot, C. (1995). “Properties of mortar mixtures containing high amounts of various supplementary cementitious materials.” ACI Spec. Publ., 153, 125–152.
Turanli, L., Uzal, B., and Bektas, F. (2004). “Effect of material characteristics on the properties of blended cements containing high volumes of natural pozzolans.” Cem. Concr. Res., 34(12), 2277–2282.
Uzal, B., Turanli, L., and Mehta, P. K. (2007). “High-volume natural pozzolan concrete for structural applications.” ACI Mater. J., 104(5), 535–538.
Yetgin, S., and Cavdar, A. (2006). “Study of effects of natural pozzolan on properties of cement mortars.” J. Mater. Civ. Eng., 535–538.
Zhou, X. M., Slater, J. R., Wavell, S. E., and Oladiran, O. (2012). “Effects of PFA and GGBS on early-ages engineering properties of Portland cement systems.” J. Adv. Concr. Technol., 10(2), 74–85.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Apr 7, 2015
Accepted: Jul 14, 2015
Published online: Sep 2, 2015
Discussion open until: Feb 2, 2016
Published in print: Mar 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.