Concrete-Galvanized Steel Pull-Out Bond Assessed by Acoustic Emission
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 2
Abstract
This paper experimentally investigates the steel-to-concrete bond phenomenon in two kinds of deformed bars: black steel and hot-dip galvanized steel. The differences in the steel-to-concrete bond behavior are identified in terms of the load-slip curves and the acoustic emission (AE) patterns measured during pull-out tests. Test results show that the bond capacity and the initial stiffness of the bond stress–slip curve of black steel are approximately 20 and 50% greater, respectively, than those of galvanized steel, and the slip corresponding to the maximum bond stress is approximately 20% times larger in the latter. By measuring the AE activity, it is possible to identify the transitional points between the four stages characterizing interaction between the concrete and the bar subjected to pull-out force. Each transition coincides with a sudden drop in the AE activity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank EUROTEGA S.A. for their help in preparing the galvanized bars. The authors appreciate the very significant contributions of José Rodriguez-Montero and José Luis Piqueras-Salas (University of Granada) and researchers José F. Gil-Villaverde and Victor Manuel Jiménez Moreno. This work received financial support from the local government of Spain, Consejería de Innovación, Ciencia y Tecnología, Project PE2012 TEP12 2429, and from the University of Granada, Spain, by “Plan Propio 2002-2003 de Investigación” under project numbers 30.PP.00.0700 and 30.PP.00.2900.This work also received support from the European Union (Fonds Européen de Dévelopment Régional).
References
ACI (American Concrete Institute). (2011). “Building code requirements for structural concrete and commentary.” ACI 318-11, Farmington Hills, MI.
Balázs, G. L., Grosse, C., Koch, R., and Reinhardt, H. W. (1993). “Acoustic emission monitoring on steel-concrete interaction.” Otto-Graf J., 4(1), 56–90.
Balázs, G. L., Grosse, C., Koch, R., and Reinhardt, H. W. (1996). “Damage accumulation on deformed steel bar to concrete interaction detected by acoustic emission technique.” Mag. Concr. Res., 48(177), 311–320.
Bartos, P., ed. (1982). Bond in concrete, Applied Science Publishers, London, U.K.
Comité Euro-International du Béton. (1982). “Bond action and bond behavior of reinforcement.”, Switzerland.
Fayala, I., Dhouibi, L., Nóvoa, X. R., and Ben Ouezdou, M. (2013). “Effect of inhibitors on the corrosion of galvanized steel and on mortar properties.” Cem. Concr. Compos., 35(1), 181–189.
Federation International du Beton. (2000). “Bond of reinforcement in concrete.”, Switzerland.
Grosse, C. (2010). Non-destructive evaluation of reinforced concrete structures: Non-destructive testing methods, Woodhead Publishing Series in Civil and Structural Engineering, Cambridge, U.K.
Grosse, C., and Ohtsu, M., eds. (2008). Acoustic emission testing, Springer, Berlin, Germany.
Grosse, C., Reinhardt, H., and Dahm, T. (1997). “Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques.” NDT&E Int., 30(4), 223–230.
Grosse, C., Weiler, B., and Reinhardt, H. W. (1996). “Relative moment tensor inversion applied to concrete fracture tests.” J. Acoust. Emission, 14(3–4), 74–87.
Kawasaki, Y., Wakuda, T., Kobarai, T., and Ohtsu, M. (2013). “Corrosion mechanisms in reinforced concrete by acoustic emission.” Constr. Build. Mater., 48, 1240–1247.
Kayali, O. (2004). Galvanized steel reinforcement in concrete, Yeomans S. R., ed., Elsevier, Amsterdam, Netherlands.
Kayali, O. A., and Yeomans, S. R. (2000). “Bond of ribbed galvanized reinforcing steel in concrete.” Cem. Concr. Compos., 22(6), 459–467.
Kutz, M., ed. (2012). Handbook of environmental degradation of materials, Elsevier, Oxford, U.K.
Lyons, A. (2010). Materials for architects & builders, Elsevier, Oxford, U.K.
Nilson, A., Darwin, D., and Dolan, C. W. (2004). Design of concrete structures, MacGraw-Hill, New York.
Ohno, K., and Ohtsu, M. (2010). “Crack classification in concrete based on acoustic emission.” Constr. Build. Mater., 24(12), 2339–2346.
Tassions, T. P. (1979). “Properties of bond between concrete and steel under load cycles idealizing seismic action.” Proc., AICAP-CEB Symp.: Structural concrete under seismic action, Comité Euro-International du Beton (CEB), Switzerland, 67–122.
Yeih, W., Huang, R., Chang, J. J., and Yang, C. C. (1997). “A pull-out test for determining interface properties between rebar and concrete.” Adv. Cem. Based Mater., 5(2), 57–65.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Aug 19, 2014
Accepted: May 6, 2015
Published online: Jul 16, 2015
Discussion open until: Dec 16, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.