Abstract
To be able to accurately predict the static resistance function of laminated glass subjected to blast loads using engineering analysis methods, it is critical to evaluate the static behavior of the polymer interlayer before and after breakage of the glass layers. Therefore, the main objective of this research is to experimentally evaluate the constitutive behavior of polymeric glass interlayers under quasi-static loading. Constitutive relation of virgin and extracted polyvinyl butyral (PVB) and UVEKOL-S extracted from laminated glass panels were evaluated, including the energy absorption capabilities for each material. Also, the postbreakage behavior of laminated glass was investigated. The experimental results of scored tensile samples carried out on UVEKOL-S glass laminates using different numbers of scores are presented, discussed, and compared with the results of the PVB glass laminates. The energy absorption of the PVB glass interlayer was found to be larger than that of the UVEKOL-S interlayer. From the scored tensile tests, it was concluded that the adhesion of PVB to glass panes is stronger compared with the adhesion of UVEKOL-S to glass panes. Conversely, it was found that this stronger bond led to premature tearing of the PVB interlayer when compared with UVEKOL-S, which allowed relative slip, leading to reduced tearing initiation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge Mr. Gantt Miller and Mr. Kurtis Suellentrop of Winco Window Company who donated the laminated glass panels. Also, the authors acknowledge Ms. Julia Schimmelpenningh of Advanced Interlayers—Solutia Inc. who donated the PVB sheets.
References
ASTM. (2010). “Standard test method for tensile properties of plastics.” D-638-10, West Conshohocken, PA.
Bennison, S. J., Jacota, A., and Smith, C. A. (1999). “Fracture of glass/poly vinyl butyral (Butacite®) laminates in biaxial flexure.” J. Am. Ceram. Soc., 82(7), 1761–1770.
Butchart, C., and Owerend, M. (2012). “Delamination in fractured laminated glass.” Int. Conf. at Glasstec, Engineered Transparency, Düsseldorf, Germany, 〈http://www.academia.edu/2442212/Delamination_in_Fractured_Laminated_Glass〉 (Jul. 24, 2014).
De Belder, K., Pintelon, R., Demol, C., and Roose, P. (2010). “Estimation of the equivalent complex modulus of laminated glass beams and its application to sound transmission loss prediction.” Mech. Syst. Signal Process., 24(3), 809–822.
Ferretti, D., Rossi, M., and Royer-Carfagni, G. (2012). “Through-cracked-tensile delamination tests with photoelastic measurements.” Challenging Glass 3: Conf. on Architectural and Structural Applications of Glass, F. Bos, C. Louter, R. Nijsse, and F. Veer, eds., IOS Press, Amsterdam, Netherlands, 641–652.
Fitton, M. D., and Broughton, J. G. (2005). “Variable modulus adhesives: An approach to optimized joint performance.” Int. J. Adhes. Adhes., 25(4), 329–336.
Kwiecień, A. (2014). “Shear bond of composites-to-brick applied with highly deformable, in relation to resin epoxy, interface materials.” Mater. Struct., 47(12), 2005–2020.
Larcher, M., et al. (2011). “Simulation of laminated glass loaded by air blast waves.” 3rd Int. Workshop on Performance, Protection and Strengthening of Structures under Extreme LoadingPROTECT2011, Trans Tech Publications, Lugano, Switzerland.
Morison, C. (2007). “The resistance of laminated glass to blast pressure loading and the coefficients for single degree of freedom analysis of laminated glass.” Ph.D. thesis, Cranfield Univ., Cranfield, U.K.
Nakane, K., Ohashi, J., and Suzuki, F. (1999). “Preparation and properties of a composite of poly (vinyl butyral) and Titania.” J. Appl. Polym. Sci., 71(1), 185–188.
Nawar, M. (2015). “Numerical modeling and experimental evaluation of laminated glazing systems and material under blast loading.” Ph.D. dissertation, Univ. of Missouri, Columbia, MO.
Nawar, M., Salim, H., Lusk, B., and Kiger, S. (2014). “Modeling and shock tube testing of architectural glazing systems for blast resistance.” J. Struct. Eng., 04014174.
Norville, H. S., and Conrath, E. J. (2001). “Considerations for blast-resistant glazing design.” J. Archit. Eng., 80–86.
Norville, H. S., and Conrath, E. J. (2006). “Blast-resistant glazing design.” J. Archit. Eng., 129–136.
Seshadri, M., Bennison, S., Jagota, A., and Saigal, S. (2002). “Mechanical response of cracked laminated plates.” Acta Mater., 50(18), 4477–4490.
Ward, S. P. (1994). “Blast effects on glazing.” M.Sc. dissertation, Royal Military College of Science, Cranfield Univ., Shrivenham, U.K.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 11, 2014
Accepted: Mar 30, 2015
Published online: Jun 3, 2015
Discussion open until: Nov 3, 2015
Published in print: Jan 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.