Effects of Macrosynthetic Fibers on Pervious Concrete Properties
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 9
Abstract
This paper presents the results of a testing plan designed to evaluate the effects of macrosynthetic fibers on pervious concrete material properties and durability. The effects of two lengths of fibers (38 and 56 mm) were investigated at three dosage rates (1.5, 3.0, and ) in a single mixture. The unit weight and void content of all samples were controlled to allow determination of the effects caused directly by the fibers. Samples were tested for strength and durability properties. The results indicate that fibers in general reduced permeability and the infiltration rate, while reducing surface abrasion and improving freeze-thaw durability.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was sponsored by FORTA Corporation. The authors would like to acknowledge the material suppliers. Various admixtures were donated by BASF. The cement was donated by Ashgrove and the aggregate by Hunt Martin Materials. The authors would like to specifically acknowledge the graduate and undergraduate students who helped through the process: Nathan Grahl, Dan Mann, Feras El Ghussein, and Victor Shoemaker. The opinions, findings and conclusions presented here are those of the authors and do not necessarily reflect those of the research sponsor.
References
ACI (American Concrete Institute). (2010). “Report on pervious concrete.”, Farmington Hills, MI.
ACI (American Concrete Institute). (2013). “Specification for pervious concrete pavement.”, Farmington Hills, MI.
ASTM. (1999). “Standard test method for abrasion resistance of concrete or mortar surfaces by the rotary-cutter method.” C-944, Annual book of ASTM standards, ASTM International, West Conshohocken, PA.
ASTM. (2003a). “Standard practice for capping cylindrical concrete specimens.” C-617, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2003b). “Standard practice for making and curing concrete test specimens in the laboratory.” C-192, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2003c). “Standard specification for concrete aggregates.” C-33, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2003d). “Standard test method for compressive strength of cylindrical concrete specimens.” C-39, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2003e). “Standard test method for splitting tensile strength of cylindrical concrete specimens.” C-496, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2008a). “Standard test method for density and void content of freshly mixed pervious concrete.” C-1688, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2008b). “Standard test method for fundamental transverse, longitudinal, and torsional resonant frequencies of concrete specimens.” C215, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2009). “Standard test method for infiltration rate of in place pervious concrete.” C-1701, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2011). “Standard test method for determining potential resistance to degradation of pervious concrete by impact and abrasion.” C-1747, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2012a). “Standard specification for portland cement.” C-150, Annual book of ASTM standards, 4(1), West Conshohocken, PA.
ASTM. (2012b). “Standard test method for density and void content of hardened pervious concrete.” C-1754, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
ASTM. (2013). “Standard specification for chemical admixtures for concrete.” C-494, Annual book of ASTM standards, 4(2), West Conshohocken, PA.
Delatte, N., Miller, D., and Mrkajic, A. (2007). “Field performance investigation on parking lot and roadway pavements: Final report.” RMC Research & Education Foundation, Silver Springs, MD.
Dong, Q., Wu, H., Huang, B., Shu, X., and Wang, K. (2013). “Investigation into laboratory abrasion test methods for pervious concrete.” J. Mater. Civ. Eng., 886–892.
Dong, X., and Gao, J. (2011). “Effects of fiber type and fiber volume content on frost resistance of fiber-reinforced concrete in airport pavement.” Proc., Third Int. Conf. on Transportation Engineering (ICTE), ASCE, Reston, VA, 1524–1529.
Dufour, J., Trottier, J., and Forgeron, D. (2006). “Behaviour and performance of monofilament macro-synthetic fibres in dry-mix shotcrete.” Proc., 10th Int. Conf. on Shotcrete for Underground Support, ASCE, Reston, VA, 194–205.
FORTA Corporation. (2012). “Project profile: Aldi Paving, Springfield, OH.” 〈http://www.forta-ferro.com/products/macrofibers/forta-ferro/projects/aldi_springfield.php〉.
Joung, Y, and Grasley, Z. (2008). “Evaluation and optimization of durable pervious concrete for use in urban areas.” Rep. for the Southwest Region University Transportation Center, Texas A&M Univ., College Station, TX.
Kevern, J. T. (2006). “Mix design determination for freeze-thaw resistant Portland cement pervious concrete.” Master’s thesis, Iowa State Univ., Ames, IA.
Kevern, J. T. (2008). “Summary of ultrafiber 500 testing in Portland cement pervious concrete.” A Rep. from the National Concrete Pavement Technology Center, Ames, IA, 〈http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=3&cad=rja&ved=0CDYQFjAC&url=ftp%3A%2F%2Fftp02.portlandoregon.gov%2FPBOT%2FPermeable%2520Pavers%2520-%2520Pervious%2520Pavement%2FPervious%2520Pavement%2FN%2520Gay%2520PC%2FFibers%2FPervious%2520Concrete%2520Fibers%2520summary.pdf&ei=vgZXUsX5CcSHygHzw4A4&usg=AFQjCNGpuZ-5iIToW2Gh0J1K6UfBxxgAmw&bvm=bv.53899372,d.aWc〉.
Kevern, J. T., Haselbach, L., and Schaefer, V. R. (2009a). “Hot weather comparative heat balances in pervious/impervious pavement systems.” 2nd Int. Conf. on Countermeasures to Urban Heat Islands, Lawrence National Lab, Berkeley, CA.
Kevern, J. T., King, G. W., and Bruetsch, A. (2012). “Pervious concrete surface characterization to reduce slip-related falls.” J. Perform. Constr. Facil., 526–531.
Kevern, J. T., Schaefer, V. R., and Wang, K. (2009b). “Predicting performance of pervious concrete using unit weight.” Proc., 2009 NRMCA Concrete Technology Forum—Focus on Performance Prediction, National Ready Mixed Concrete Association, Silver Springs, MD.
Kevern, J. T., Schaefer, V. R., and Wang, K. (2009c). “Temperature behavior of a pervious concrete system.” Transportation Research Record 2098, Transportation Research Board, Washington, DC.
Kevern, J. T., Schaefer, V. R., and Wang, K. (2009d). “The effect of curing regime on pervious concrete abrasion resistance.” J. Test. Eval., 37(4), 101761.
Kevern, J. T., Schaefer, V. R., and Wang, K. (2011). “Mixture proportion development and performance evaluation for pervious concrete for overlay applications.” ACI Mater. J., 108(4), 439–448.
Kevern, J. T., Schaefer, V. R., Wang, K., and Suleiman, M. T. (2008a). “Pervious concrete mixture proportions for improved freeze-thaw durability.” J. ASTM Int., 5(2), 12.
Kevern, J. T., and Sparks, J. D. (2013). “Low cost techniques for improving the surface durability of pervious concrete.” Transportation Research Record 2342, Transportation Research Board, Washington, DC, 83–89.
Kevern, J. T., Wang, K., and Schaefer, V. R. (2008b). “Pervious concrete in severe exposures: Development of pollution-reducing pavement for northern cities.” ACI Concrete Int. Magazine, 43–49.
Kevern, J. T., Wang, K., and Schaefer, V. R. (2010). “The effect of coarse aggregate on the freeze-thaw durability of pervious concrete.” J. Mater. Civ. Eng., 469–475.
NRMCA (National Ready Mixed Concrete Association). (2004). “Freeze-thaw resistance of pervious concrete.” Silver Spring, MD.
Olek, J., Weiss, W. J., Neithalath, N., Marolf, A., Sell, E., and Thornton, W. D. (2003). “Development of quiet and durable porous Portland cement concrete paving materials.”, Purdue Univ., West Lafayette, IN.
Pantelides, C., Garfield, T., Richins, W., Larson, T., and Blakeley, J. (2012). “Behavior of concrete panels reinforced with synthetic fibers, mild steel, and GFRP composites subjected to blasts.” Structures Congress, ASCE, Reston, VA, 23–34.
Park, S.-B., and Tia, M. (2004). “An experimental study on the water-purification properties of porous concrete.” Cem. Concr. Res., 34(2), 177–184.
Vorobieff, G., and Donald, G. (2008). “A safe highway driving surface using an open graded concrete.”, Australian Roads and Traffic Authority, RTA Pavement Structures Section, NSW, Australia.
Yang, Z. (2011). “Freezing-and-thawing durability of pervious concrete under simulated field conditions.” ACI Mater. J., 108(2), 187–195.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 15, 2013
Accepted: Oct 3, 2014
Published online: Nov 17, 2014
Discussion open until: Apr 17, 2015
Published in print: Sep 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.