Experimental Study of Bond Strength between Titanium Bar and Lime-Based Mortar
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 6
Abstract
In the last decades, a number of technical solutions for the improvement of structural connections using new materials between masonry wall panels have been the subject of several studies. In this context, the increasing interest in titanium could be attributed to its high specific resistances and chemical stability. The emphasis of this study is therefore the understanding of the bond behavior between lime-based mortars and titanium-based reinforcing rods. Experimental results showed that the titanium-lime bond is characterized by low bond strength. With the aim of increasing bond stresses, different surface treatments were investigated based on chemical and mechanical interlocking. The effect of these treatments and the general problems related to masonry reinforcing techniques have been discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is based on the results of the project Reluis carried out by the university laboratory located in Terni, Italy. Special thanks go to Mr. A. Molinari, F. Bassanelli, and A. Nullo. Thanks also go to Titania S.p.A. for technical assistance during the strengthening operations.
References
Aiello, M. A., Leone, M., and Pecce, M. (2007a). “Bond performances of FRP rebars-reinforced concrete.” J. Mater. Civ. Eng., 205–213.
Aiello, M. A., Sciolti, M. S., and Triantafillou, T. C. (2007b). “FRP-strengthened masonry: Bond aspects.” Int. Conf. FRP Reinforcement for Concrete Structures, Univ. of Patras, Patras, Greece, 652–653.
Al Hussaini, I. S., and Al Wazzan, K. A. (2005). “Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium.” J. Prosthet. Dent., 94(4), 350–356.
Anderson, G. P., Bennett, S. J., and De Vries, K. L. (1977). Analysis and testing of adhesive bond, Academic, New York.
ASTM. (2012). “Standard test method for compressive strength of masonry prisms.” Masonry test methods and specifications for the building industry, West Conshohocken, PA.
Avorio, A., Borri, A., and Corradi, M. (2003). “Ricerche per la ricostruzione: Iniziative a carattere tecnico e scientifico a supporto della ricostruzione.” DEI Tipografia del Genio Civile, Rome (in Italian).
Baldan, A. (2004). “Review adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pre-treatment.” J. Mater. Sci., 39(1), 1–49.
Borri, A., and Corradi, M. (2007). “L’uso di barre in titanio nel miglioramento sismico degli edifici: Problemi di aderenza.” Proc., Italian Conf. for Earthquake Engineering, Italian National Association of Earthquake Engineering (Anidis) (in Italian).
Catman version 3.0 [Computer software]. HBM, Darmstadt, Germany.
Cherry, B. W. (1981). Polymer surfaces, Cambridge University Press, Cambridge, U.K.
Cook, R. A. (1993). “Behavior of chemically bonded anchors.” J. Struct. Eng., 2744–2762.
Cosenza, E., Manfredi, G., and Realfonzo, R. (1997). “Behavior and modeling of bond of FRP rebars to concrete.” J. Compos. Constr., 40–51.
De Larrard, F., Schaller, I., and Fuches, J. (1983). “Effect of the bar diameter on the bond strength of passive reinforcement in high-performance concrete.” ACI Mater. J., 90(4), 333–339.
De Lorenzis, L., Rizzo, A., and La Tegola, A. (2002). “A modified pull-out test for bond of near surface mounted FRP rods in concrete.” J. Compos. Part B, 33(8), 589–603.
Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). “Local bond stress-slip relationship of deformed bars under generalized excitations.”, Univ. of California, Berkeley, CA.
Emsley, J. (2011). Nature’s building blocks: An A-Z guide to the elements, 2nd Ed., Oxford University Press, Oxford, U.K.
Ferreira, A. J. M., Camanho, P. P., Marques, A. T., and Fernandes, A. A. (2001). “Modelling of concrete beams reinforced with FRP re-bars.” Compos. Struct., 53(1), 107–116.
Hamid, A. A. (1996). “Strengthening of hollow block masonry basement walls with plastic reinforcing bars.” Masonry Soc. J., 14(1), 29–33.
Indirli, M., and Castellano, M. G. (2008). “Shape memory alloy device for the structural improvement of masonry heritage structures.” Int. J. Archit. Heritage, 2(2), 93–119.
Kinloch, A. J. (1987). Adhesion and adhesives: Science and technology, Chapman and Hall, London.
Lin, X., and Zhang, Y. (2014). “Evaluation of bond stress-slip models for FRP reinforcing bars in concrete.” Compos. Struct., 107, 131–141.
Malvar, L. J., Cox, J. V., and Cochran, K. B. (2003). “Bond between carbon fiber reinforced polymer bars and concrete. I: Experimental study.” J. Compos. Constr., 154–163.
Mazaheripour, H., Barros, J. A. O., Sena-Cruz, J. M., Pepe, M., and Martinelli, E. (2013). “Experimental study on bond performance of GFRP bars in self-compacting steel fiber reinforced concrete.” Compos. Struct., 95, 202–212.
Mittal, K. L., ed. (1984). Adhesive joints, Plenum, New York.
Molitor, P., Barron, V., and Young, T. (2001). “Surface treatment of titanium for adhesive bonding to polymer composites: A review.” Int. J. Adhes. Adhes., 21(2), 129–136.
Nanni, A., Al-Zahrani, M. M., Al-Dulajon, S. U., Bakis, C. E., and Boothby, T. E. (1995). “Bond of FRP reinforcement to concrete—Experimental results.” Proc., 2nd Int. RILEM Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-2), E&FN Spon, Ghent, Belgium, 135–145.
Pecce, M., Manfredi, G., Realfonzo, R., and Cosenza, E. (2001). “Experimental and analytical evaluation of bond properties of GFRP bars.” J. Mater. Civ. Eng., 282–290.
Rafi, M. M., Nadjai, A., and Ali, F. (2008). “Finite element modeling of carbon fiber-reinforced polymer reinforced concrete beams under elevated temperatures.” ACI Struct. J., 105(6), 701–710.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 17, 2014
Accepted: Jun 5, 2014
Published online: Aug 13, 2014
Discussion open until: Jan 13, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.