Effects of Aggregate Properties and Concrete Rheology on Stability Robustness of Self-Consolidating Concrete
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 5
Abstract
Compared with ordinary concrete, the segregation resistance of self-consolidating concrete (SCC) are more sensitive to small variations of mix proportions such as dosage of superplasticizer, and the size, volume, and gradation, as well as moisture content of the fine and coarse aggregates. To design a SCC mixture, which is robust against small variations in raw materials, it is critical to understand the mechanism of how mix proportions affect robustness. In this paper, modified segregation probe was used to study the effects of various mixture properties on static stability robustness of SCC. It was found that a static segregation rate equation is helpful to explain how paste rheology and aggregate properties affect robustness. Mixture properties, such as higher paste volume, lower superplasticizer % by weight of cement, lower slump flow, smaller aggregate size, better gradation, and higher aggregate packing density may improve robustness. Among the aggregate properties, smaller aggregate size and better gradation seem to have more significant effects than higher aggregate packing density. As expected, no obvious relationship was observed between concrete rheology and robustness in this study.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2008). “Static segregation of hardened self-consolidating concrete cylinders.” PP58-08, Washington, DC.
Assaad, J., and Khayat, K. H. (2005). “Effect of coarse aggregate characteristics on lateral pressure exerted by self-consolidating concrete.” ACI Mater. J., 102(3), 145–153.
ASTM. (2009). “Test method for rapid assessment of static segregation resistance of self-consolidating concrete using penetration test.” C1712–09, West Conshohoken, PA.
ASTM. (2010). “Test method for static segregation of self-consolidating concrete using column technique.” C1610/C1610M-10, West Conshohoken, PA.
ASTM. (2012a). “Standard specification for portland cement.” ASTM C150/C150M–12, West Conshohoken, PA.
ASTM. (2012b). “Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.” ASTM C618-12a, West Conshohoken, PA.
Bonen, D., et al. (2007). “Robustness of self-consolidating concrete.” 5th Int. RILEM Symp. on Self-Compacting Concrete, RILEM, Bagneux, France, 33–42.
Bonen, D., and Shah, S. P. (2005). “Fresh and hardened properties of self-consolidating concrete, concrete construction.” Prog. Struct. Eng. Mater., 7(1), 14–26.
EFNARC. (2005). “Self-compacting concrete, European project group.” The European guidelines for self-compacting concrete: Specification, production and use, 〈http://www.efnarc.org/pdf/SCCGuidelinesMay2005.pdf〉 (May 1, 2005).
Geiker, M. R., Brandl, M., Thrane, L. N., and Neilsen, L. F. (2002). “On the effect of coarse aggregate fraction and shape on the rheological properties of self-consolidating concrete.” Cem. Concr. Aggregate, 24(1), 3–6.
Japan Society of Civil Engineers. (1999). “Recommendation for self-consolidating concrete.” JSCE Concr. Eng., 31, 77–87.
Jolicoeur, C., Khayat, K. H., Pavate, T. V., and Page, M. (2000). “Evaluation of effect of chemical admixture and supplementary materials on stability of concrete-based materials using in-situ conductivity method, superplasticizer and other chemical admixtures in concrete.” Proc., 6th CANMET/ACI Int. Conf., V. M. Malhotra, ed., American Concrete Institute, Farmington Hills, MI, 461–483.
Khayat, K., and Guizani, Z. (1997). “Use of viscosity-modifying admixture to enhance stability of fluid concerte.” ACI Mater. J., 94(4), 332–340.
Kwan, A., and Ng, I. (2009). “Optimum superplasticiser dosage and aggregate proportions for SCC.” Mag. Concr. Res., 61(4), 281–292.
Kwan, A., and Ng, I. (2010). “Improving performance and robustness of SCC by adding supplementary cementitious materials.” Constr. Build. Mater., 24(11), 2260–2266.
Lachemi, M., Hossain, K., Lambros, V., Nkinamubanzi, P., and Bouzoubaa, N. (2004). “Self-consolidating concrete incorporating new viscosity modifying admixtures.” Cem. Concr. Res., 34(6), 917–926.
Naji, S., Hwang, S., and Khayat, K. (2011). “Robustness of self-consolidating concrete incorporating different viscosity-enhancing admixtures.” ACI Mater. J., 108(4), 432–438.
Nunes, S., Milheiro-Oliveira, P., Coutinho, J., and Figueiras, J. (2013). “Robust SCC mixes through mix design.” J. Mater. Civ. Eng., 183–193.
Sakai, G., Shgematsu, K., Yurugi, M., and Sakata, N. (1994). “Flow stabilizing properties of special viscosity agent.” 37th Japan Congress on Material Research, Science Council of Japan, Tokyo, Japan.
Sakata, N., Marruyama, K., and Minami, M. (1996). “Basic properties and effects of welan gum on sefl-consolidating concrete.” RILEM Proc., 32, Production Method and Workability of Concrete, Paisley, Bartos, 237–253.
Shen, L., and Bahrami Jovein, H. (2013). “Robustness of self-consolidating concrete: New testing method and design strategy.” 7TH Int. RILEM Symp. on Self-Consolidating Concrete, Paris, 100–105.
Shen, L., Struble, L., and Lange, D. (2007). “New testing method for static segregation.” J. Test. Eval., 35(3), 303–309.
Shen, L., Struble, L., and Lange, D. (2009). “Modeling static segregation of self-consolidating concrete.” ACI Mater. J., 106(4), 367–374.
Shen, L., Struble, L. J., and Lange, D. (2005). “Testing static segregation of SCC.” SCC2005, 2nd North American Conf. on the Design and Use of SCC, S. Shah, ed., Center for Advanced Cement-Based Materials, Evanston, IL, 729–737.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 3, 2013
Accepted: Apr 14, 2014
Published online: Aug 1, 2014
Discussion open until: Jan 1, 2015
Published in print: May 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.