Technical Characterization of Sintered-Glass Ceramics Derived from Glass Fibers Recovered by Pyrolysis
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 4
Abstract
Sintered wollastonite-plagioclase glass ceramics were prepared through crystallization of a parent glass generated by vitrification of pyrolysis residual glass fibers that had been pyrolytically recovered from waste composite materials. A vitrifiable mixture consisting of 95% by weight glass fiber and 5% by weight was melted at 1,450°C to obtain a glass frit. The glass-ceramic materials were produced by a sinter-crystallization process from the powdered glass frit. The effect of firing temperature on the properties of sintered-glass ceramics was investigated. The sintering behavior of glass-ceramic tiles was evaluated by means of water absorption, apparent porosity, and bulk density. In addition, the mineralogical and microstructural characterization of these tiles was carried out using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results from experiments such as water absorption, bending strength, chemical resistance, and stain resistance have shown that the developed glass-ceramic materials possess technological properties very suitable for architectural applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Dr. M. I. Martín thanks the Spanish National Research Council (CSIC), cofinanced by the European Social Fund Operational Programme 2007–2013 Adaptability and Employment Multiregional, for the contract JAE-Doc_08–00032. The authors also thank IRICA from University of Castilla-La Mancha (Spain) for their experimental assistance with XRD.
References
Appendino, P., Ferraris, M., Matekovits, I., and Salvo, M. (2004). “Production of glass-ceramic bodies from the bottom ashes of municipal solid waste incinerators.” J. Eur. Ceram. Soc., 24(5), 803–810.
ASTM. (1999). “Standard test method for water adsorption, bulk density, apparent porosity and apparent specific gravity of fired whiteware products.”, West Conshohoken, PA.
Barbieri, L., Lancelloti, I., Manfredini, T., Pellacani, G. C., Rincón, J. Ma., and Romero, M. (2001). “Nucleation and crystallization of new glasses obtained from fly ash originating from thermal power plants.” J. Am. Ceram. Soc., 84(8), 1851–1858.
Barbieri, L., Lancellotti, I., Manfredini, T., Queralt, I., Rincón, J. Ma., and Romero, M. (1999). “Design, obtainment and properties of glasses and glass-ceramics from coal fly ash.” Fuel, 78(2), 271–276.
Barbieri, L., Manfredini, T., Queralt, I., Rincón, J. M., and Romero, M. (1997). “Vitrification of fly ash from thermal power stations.” Glass Technol., 38(5), 165–170.
Bernardo, E. (2008). “Fast sinter-crystallization of a glass from waste materials.” J. Non-Cryst. Solids, 354(29), 3486–3490.
Bernardo, E., Castellan, R., and Hreglich, S. (2007). “Sintered glass-ceramics from mixtures of wastes.” Ceram. Int., 33(1), 27–33.
Bernardo, E., Esposito, L., Rambaldi, E., Tucci, A., Pontikes, Y., and Angelopoulos, G. N. (2009). “Sintered essenite-wollastonite-plagioclase glass-ceramics from vitrified waste.” J. Eur. Ceram. Soc., 29(14), 2921–2927.
Donald, I. W. (2010). Waste inmobilization in glass and ceramic based hosts: Radioactive, toxic and hazardous wastes, Wiley, Chichester, U.K.
Elliot, M. L., Chapman, C. C., and Freeman, C. J. (1994). “Characterization and vitrification of various waste streams. Environmental and waste management issues in the ceramic industry.” Ceramic transactions, G. B. Mellinger, ed., Vol. 39, American Ceramic Society, Westerville, OH, 83–90.
EPA Handbook. (1992). “Vitrification technologies for treatment of hazardous and radioactive waste.”, U.S. EPA, Office of Research and Development, Center for Environmental Research Information, Washington, DC.
European Committee for Standardization (CEN). (2003). “Ceramic tiles. Definitions, clasifications, characteristics and marking.”, Brussels, Belgium.
European Committee for Standardization (CEN). (2006). “Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part. I: Determination of flexural strength.”, Brussels, Belgium.
Fernández Navarro, J. M. (2003). El vidrio, 3rd ed., Consejo Superior de Investigaciones Científicas, Sociedad Española de Cerámica y Vidrio, Madrid (in Spanish).
Höland, W., and Beall, G. (2002). Glass-ceramic technology, American Ceramic Society, Westerville, OH.
ISO. (1997a). “Ceramic tiles. Determination of chemical resistance.”, Geneva, Switzerland.
ISO. (1997b). “Ceramic tiles. Determination of resistance to stains.”, Geneva, Switzerland.
ISO. (1997c). “Ceramic tiles. Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density.”, Geneva, Switzerland.
Kipka, A., Luckscheiter, B., and Lutze, W. (1993). “Melting of fly ashes and product properties.” Glastech. Ber. Glass Sci. Technol., 66(9) 215–220.
Leroy, C., Ferro, M. C., Monteiro, R. R. C., and Fernandes, M. H. V. (2001). “Production of glass-ceramics from coal ashes.” J. Eur. Ceram. Soc., 21(2), 195–202.
López, F. A., Martín, M. I., Alguacil, F. J., Rincón, J. Ma., Centeno, T. A., and Romero, M. (2012a). “Thermolysis of fibreglass polyester composite and reutilisation of the glass fibre residue to obtain a glass–ceramic material.” J. Anal. Appl. Pyrolysis, 93, 104–112.
López, F. A., Martín, M. I., García-Díaz, I., Rodríguez, O., Alguacil, F. J., and Romero, M. (2012b). “Recycling of glass fibers from fiberglass polyester waste composite for the manufacture of glass-ceramic materials.” J. Environ. Prot., 3(8), 740–747.
Martín, M. I., et al. (2011). “Materiales vitrocerámicos del sistema MgO-Al2O3-SiO2 a partir de ceniza de cáscara de arroz.” Bol. Soc. Esp. Ceram. Vidr., 50(4) 201–206.
Martín, M. I., et al. (2013). “Crystallisation and microstructure of nepheline-forsterite glass-ceramics.” Ceram. Int., 39(3), 2955–2966.
Martín, M. I., López, F. A., Alguacil, F. J., and Romero, M. (2014). “Development of crystalline phases in sintered glass-ceramics from residual E-glass fibres.” Ceram. Int., 40(2) 2769–2776.
Matthes, W. E. (1990). Vidriados cerámicos, Ediciones Omega, S.A., Barcelona, Spain (in Spanish).
Nippon Electric Glass. (2014). “Glass ceramic building materials. Neopariés.” 〈http://www.negb.co.jp/en/product/01/index.html〉 (Apr. 8, 2014).
Park, Y. J., and Heo, J. (2002). “Conversion to glass-ceramics from glasses made by MSW incinerator fly ash for recycling.” Ceram. Int., 28(6), 689–694.
Plagioclase Mineral Data. (2014). “Physical properties of plagioclase.” 〈http://www.webmineral.com/data/Plagioclase.shtml〉 (Apr. 8, 2014).
Räbiger, W., Keldenich, K., and Scheffler, J. (1995). “Experience in operation of a pilot plant melting residual substances.” Glastech. Ber. Glass Sci. Technol., 68(3), 84–90.
Romero, M., Andrés, A., Alonso, R., Viguri, J., and Rincón, J. Ma. (2008). “Sintering behaviour of ceramic dobies from contaminated marine sediments.” Ceram. Int., 34(8), 1917–1924.
Vu, D.-H., Wang, K.-S., Nam, B. X., Bac, B. H., and Chu, T.-C. (2011). “Preparation of humidity-controlling porous ceramics from volcanic ash and waste glass.” Ceram. Int., 37(7), 2845–2853.
Wollastonite-1A Mineral Data. (2014). “Physical properties of wollastonite-1A.” 〈http://www.webmineral.com/data/Wollastonite-1A.shtml〉 (Apr. 8, 2014).
Yoon, S.-D., Lee, J.-U., Lee, J.-H., Yum, Y.-H., and Yoon, W.-J. (2013). “Characterization of wollastonite glass-ceramics made from waste glass and coal fly ash.” J. Mar. Sci. Technol., 29(2), 149–153.
Zhao, Y., Chen, D., Bi, Y., and Long, M. (2012). “Preparation of low glass-ceramics from molten blast furnace slag.” Ceram. Int., 38(3), 2495–2500.
Zhou, J., and Wang, Y. (2008). “A novel process of preparing glass-ceramics with pseudo-bioclastic texture.” Ceram. Int., 34(1), 113–118.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 6, 2013
Accepted: Mar 26, 2014
Published online: Jul 25, 2014
Discussion open until: Dec 25, 2014
Published in print: Apr 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.