Laboratory Evaluation of Asphalt Blends of Recycling Agents Mixed with Aged Binders
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 4
Abstract
For both environmental and financial reasons, the use of reclaimed asphalt pavements (RAP) needs to be maximized. In this study, rejuvenators and soft asphalt cements were used as recycling agents. Aged binders recovered from field projects were mixed with various percentages of recycling agents to produce asphalt blends. The engineering and chemical properties of the blends were evaluated in the laboratory using binder tests including viscosity, dynamic shear rheometer, gel permeation chromatograph, and Fourier transform infrared spectroscopy. With high RAP contents, the test results indicated that hardened binders may be restored to proper performance characteristics using rejuvenators. The recycling process produces a final blend that is similar to a reference binder in terms of viscoelastic properties. The blends mixed with rejuvenators behaved better under fatigue than those with softening agents. The large molecular size was shown to be a characteristic of an asphalt blend, and may be used as a valuable indicator to design pavement recycling projects. The formation of the carbonyl area in aged asphalt was reduced by adding recycling agents, which changed the physical properties of the blended binder in a predictable manner. A model was developed to detect the content of recycling agents.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are very grateful to the National Science Council (NSC95-2211-E-006-340–MY2) and the Taiwan Directorate General of Highways for providing financial and field support.
References
Apeagyei, A. K., Clark, T. M., and Rorrer, T. M. (2013). “Stiffness of high-RAP asphalt mixtures: Virginia’s experience.” J. Mater. Civ. Eng., 747–754.
Asphalt Institute. (1977). Mix design methods for asphalt concrete and other hot-mix types, MS-2, 6th Ed., Lexington, KY.
ASTM (2011). “Standard practice for preparation of viscosity blends for hot recycled bituminous materials.” D4887, Philadelphia.
Booshehrian, A., Mogawer, W. S., and Bonaquist, R. (2013). “How construct an asphalt binder master curve and assess the degree of blending between RAP and virgin binders.” J. Mater. Civ. Eng., 1813–1821.
Brown, E. R., Kandhal, P. S., Roberts, F. L., Kim, Y. R., Lee, D. Y., and Kennedy, T. W. (2009). Hot mix asphalt materials, mixture design, and construction, 3rd Ed., National Asphalt Pavement Association, Lanham, MD.
Bullin, J., Davison, R., Glover, C., Chaffin, J., Liu, M., and Madrid, R. (1997). “Development of superior asphalt recycling agents, phase 1: Technical feasibility.”, Dept. of Energy, Washington, DC.
Christensen, D. W., and Anderson, D. A. (1992). “Interpretation of dynamic mechanical test data for paving grade asphalt cements.” J. Assoc. Asphalt Paving Technol., 61, 67–116.
Daniel, J. S., Pochily, J. L., and Boisvert, D. M. (2010). “Can more reclaimed asphalt pavement be added?”, Transportation Research Board, Washington, DC, 19–29.
Dunning, R., and Mendenhall, R. (1978). “Design of recycled asphalt pavements and selection of modifiers.” Recycling of bituminous pavement, STP 662, L. Wood, ed., ASTM, Philadelphia, 35–46.
Hajj, E. Y., Sebaaly, P. E., and Shresta, R. (2009). “Laboratory evaluation of mixes containing recycled asphalt pavement (RAP).” Int. J. Road Mater. Pavements Des., 10(3), 495–518.
Huang, S. -C., Glaser, R., and Turner, F. (2012). “Impact of water on asphalt aging—Chemical aging kinetic study.”, Transportation Research Board, Washington, DC, 63–72.
Jennings, P. W., Pribanic, J. A., Raub, M. F., Smith, J. A., and Mendes, T. M. (1993). “Advanced high performance gel permeation chromatography methodology.”, Strategic Highways Research Program, National Research Council, Washington, DC.
Madrid, R. C., Davison, R. R., and Glover, G. J. (2000). “Compositional evaluation of asphalt binder recycling agents.” Pet. Sci. Technol., 18(1), 153–175.
Newcomb, D. E., Nusser, B. J., Kiggundu, B. M., and Zallen, D. M. (1984). “Laboratory study of the effects of recycling modifiers on aged asphalt cement.”, Transportation Research Board, Washington, DC, 66–77.
Noureldin, A. S., and Wood, L. S. (1989). “Variations in molecular size distribution of virgin and recycled asphalt binders associated with aging.”, Transportation Research Board, Washington, DC, 191–197.
Petersen, J. C. (1986). “Quantitative functional group analysis of asphalts using differential infrared spectrometry and selective chemical reaction: Theory and application.”, Transportation Research Board, Washington, DC, 1–11.
Peterson, G. D., Davison, R. R., Glover, C. J., and Bullin, J. A. (1994). “Effect of composition on asphalt recycling agent performance.”, Transportation Research Board, Washington, DC, 38–46.
Shen, J., Amirkhanian, S., and Xiao, F. (2006). “High-pressure gel permeation chromatography of aging of recycled crumb rubber-modified binders with rejuvenating agents.”, Transportation Research Board, Washington, DC, 21–27.
Soleymani, H. R., Bahia, H. U., and Bergan, A. T. (1999). “Blending charts based on performance-graded asphalt binder specification.”, Transportation Research Board, Washington, DC, 7–14.
Tran, N. H., Taylor, A., and Willis, R. (2012). “Effect of rejuvenator on performance properties of HMA mixtures with high RAP and RAS contents.”, Auburn Univ., Auburn, Alabama.
Zaumanis, M., Mallick, R., and Frank, R. (2013). “Evaluation of rejuvenator’s effectiveness with conventional mix testing for 100% RAP mixtures.”, Transportation Research Board, Washington, DC, 17–25.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 13, 2013
Accepted: Mar 10, 2014
Published online: Jul 22, 2014
Discussion open until: Dec 22, 2014
Published in print: Apr 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.