Effect of Waste Glass on the Properties of Concrete
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 11
Abstract
Crushed waste glass bottles accumulating in stockpiles around New Zealand are an environmental concern, but also provide an available resource for potential use in concrete by partially replacing coarse and fine natural aggregates. The objective of this study was to test the fundamental properties of concrete that utilized 20% waste glass as a partial replacement for coarse and fine natural aggregates. It is demonstrated that the waste glass has a negative effect on concrete properties, including air content, compressive strength, and flexural strength, while also contributing to the problematic alkali-silica reaction. The use of supplementary cementitious materials such as fly ash or microsilica was found to improve the properties of concrete that utilized waste glass, especially with regards to inhibiting the alkali-silica reaction, and hence it was established that waste glass should be used with either fly ash or microsilica mainly due to concerns regarding the development of the alkali-silica reaction caused by the waste glass trialed in this study.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research study was made possible via funding provided by the New Zealand Ministry for Science and Innovation, 3R Group Ltd., and Firth Industries Ltd. Thanks are extended to Graeme Norton, Baldev Kesha. and Sue Freitag for helping to secure resources and equipment throughout the testing program.
References
ASTM. (2003). “Potential alkali-reactivity of cement-aggregate combinations (mortar-bar method).” C227, West Conshohocken, PA.
ASTM. (2007). “Potential alkali reactivity of aggregates (mortar-bar method).” C1260, West Conshohocken, PA.
ASTM. (2008). “Determination of length change of concrete due to alkali-silica reaction.” C1293, West Conshohocken, PA.
ASTM. (2010). “Standard test method for air content of freshly mixed concrete by the pressure method.” C231, West Conshohocken, PA.
ASTM. (2012). “Standard specification for portland cement.” C150, West Conshohocken, PA.
ASTM. (2013). “Standard test method for density, absorption, and voids in hardened concrete.” C642, West Conshohocken, PA.
Bazant, Z. P., Jin, W., and Meyer, C. (1998). “Fracture mechanics of concrete structures.” Proc. Fract. Mech. Part 3, 1687–1693.
Dhir, R. K., Dyer, T. D., and Tang, M. C. (2009). “Alkali-silica reaction in concrete containing glass.” Mater. Struct., 42(10), 1451–1462.
Freitag, S. A., Goguel, R., and Milestone, N. B. (2003). TR3 alkali silica reaction: Minimising the risk of damage to concrete, guidance notes and recommended practice, 2nd Ed., Cement and Concrete Association of New Zealand, Wellington, New Zealand.
Idir, R., Cyr, M., and Tagnit-Hamou, A. (2011). “Pozzolanic properties of fine and coarse color-mixed glass cullet.” Cem. Concr. Compos., 33(1), 19–29.
Ismail, Z. Z., and Al-Hashimi, E. A. (2009). “Recycling of waste glass as a partial replacement for fine aggregate in concrete.” Waste Manage., 29(2), 655–659.
Jin, W., Meyer, C., and Baxter, S. (2000). “Glascrete—Concrete with glass aggregate.” ACI Mater. J., 97(2), 208–213.
Johnston, C. D. (1974). “Waste glass of coarse aggregate for concrete.” J. Test. Eval., 2(5), 344–350.
Kisacik, I. E. (2002).“Using glass in concrete.” B.S. thesis, Osmangazi Univ., Faculty of Engineering and Architecture, Dept. of Civil Engineering, Turkey.
Ley, M. T. (2007). “The effects of ash on the ability to entrain and stabilize air in concrete.” Ph.D. thesis, Univ. of Texas, Austin, TX.
Park, S. B., Lee, B. C., and Kim, J. H. (2004). “Studies on mechanical properties of concrete containing waste glass aggregate.” Cem. Concr. Res., 34(12), 2181–2189.
Quan, H. (2011). “The effects of change in fineness of fly ash on air-entraining concrete.” Open Civ. Eng. J., 5, 124–131.
Rajabipour, F., Maraghecia, H., and Fischer, G. (2010). “Investigating the alkali-silica reaction of recycled glass aggregates in concrete materials.” J. Mater. Civ. Eng., 1201–1208.
Saccini, A., and Bignozzi, M. C. (2010). “ASR expansion behaviour of recycled glass fine aggregates in concrete.” Cem. Concr. Res., 40(4), 531–536.
Shayan, A., and Xu, A. (2006). “Performance of glass powder as a pozzolanic material in concrete: A field trial on concrete slabs.” Cem. Concr. Res., 36(3), 457–468.
Standards New Zealand (SNZ). (1986). “Methods of test for concrete.”, New Zealand.
Taha, B., and Nounu, G. (2008). “Properties of concrete contains mixed colour waste recycled glass as sand and cement replacement.” Constr. Build. Mater., 22(5), 713–720.
Tan, K. H., and Du, H. (2013). “Use of waste glass as sand in mortar: Part I—Fresh, mechanical and durability properties.” Cem. Concr. Compos., 35(1), 109–117.
Topcu, I. B., and Canbaz, M. (2004). “Properties of concrete containing glass.” Cem. Concr. Res., 34(2), 267–274.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 11, 2013
Accepted: Mar 4, 2014
Published online: Jun 18, 2014
Published in print: Nov 1, 2014
Discussion open until: Nov 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.