New Pore Structure Assessment Methods for Cement Paste
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 2
Abstract
In this study, two new approaches for pore structure assessment of cement paste are investigated and compared with mercury intrusion porosimetry (MIP)-based methods. One is based on a status-oriented computer model; the other is based on fractal analysis on the impedance measured by a noncontact impedance measurement system. In the computer model, cement paste microstructure is simulated as a function of cement properties, water-to-cement ratio (w/c), and degree of hydration. With the simulated microstructure, large capillary pores are characterized by image processing. A model developed based on nitrogen adsorption results and physical rules is applied to predict the small capillary pore structure, as a complementation to cover the whole range of capillary pores. In the impedance measurement based approach, fractal dimensions corresponding to specific pore size ranges are determined from the fractal networks and the impedance responses of the material. Then the pore size distribution curves are deduced. The former approach is capable of providing much more realistic representation of the pore structure as compared with the traditional MIP method, while the latter is also considered as a promising method for pore structure assessment, especially in large pore size range.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the China Ministry of Science and Technology under 2009CB623200 and from Hong Kong RGC under 615810 are greatly acknowledged.
References
Aligizaki, K. K. (2006). Pore structure of cement-based materials: Testing, interpretation and requirements, Taylor & Francis, London and New York.
Andrade, C., Blanco, V. M., Collazo, A., Keddam, M., Nóvoa, X. R., and Takenouti, H. (1999). “Cement paste hardening process studied by impedance spectroscopy.” Electrochim. Acta, 44(24), 4313–4318.
ASTM. (2012). “Standard specification for portland cement.” C150/C150M, West Conshohocken, PA.
Barrett, E. P., Joyner, L. G., and Halenda, P. P. (1951). “The determination of pore volume and area distributions in porous substances: I. Computations from nitrogen isoterms.” J. Am. Chem. Soc., 73(1), 373–380.
Bentz, D. P. (2005). CEMHYD3D: A three-dimensional cement hydration and microstructure development modeling package, Version 3.0, National Institute of Standard and Technology, Gaithersburg, MD.
Bishnoi, S., and Scrivener, K. (2009a). “μic: A new platform for modelling the hydration of cements.” Cem. Concr. Res., 39(4), 266–274.
Bishnoi, S., and Scrivener, K. (2009b). “Studying nucleation and growth kinetics of alite hydration using μic.” Cem. Concr. Res., 39(10), 849–860.
Cabeza, M., Keddam, M., Nóvoa, X. R., Sanchez, I., and Takenouti, H. (2006). “Impedance spectroscopy to characterize the pore structure during the hardening process of Portland cement paste.” Electrochim. Acta, 51(8–9), 1831–1841.
Charles, H. (1961). CRC handbook of chemistry and physics, 40th Ed., CRC Press, Cleveland, OH.
Coussy, O. (2004). Poromechanics, 2nd Ed., Wiley, England.
Diamond, S. (2000). “Mercury porosimetry—an inappropriate method for the measurement of pore size distributions in cement-based materials.” Cem. Concr. Res., 30(10), 1517–1525.
Díaz, B., Freire, L., Merino, P., Nóvoa, X. R., and Pérez, M. C. (2008). “Impedance spectroscopy study of saturated mortar samples.” Electrochim. Acta, 53(25), 7549–7555.
Friedmann, H., Amiri, O., and Aït-Mokhtar, A. (2008). “Physical modeling of the electrical double layer effects on multispecies ions transport in cement-based materials.” Cem. Concr. Res., 38(12), 1394–1400.
Gallé, C. (2001). “Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying.” Cem. Concr. Res., 31(10), 1467–1477.
Garboczi, E. J., and Bentz, D. P. (1991). “Digital simulation of the aggregate-cement paste interfacial zone in concrete.” J. Mater. Res., 6(1), 196–201.
Garboczi, E. J., and Bentz, D. P. (1992). “Computer simulation of the diffusivity of cement-based materials.” J. Mater. Sci., 27(8), 2083–2092.
Gmira, A., Zabat, M., Pellenq, R. J.-M., and Van Damme, H. (2004). “Microscopic physical basis of the poromechanical behavior of cement-based materials.” Mater. Struct., 37(1), 3–14.
Gonzalez, R. C., and Woods, R. E. (2002). Digital image processing, 2nd Ed., Prentice Hall, Upper Saddle River, NJ.
Itagaki, M., Hatada, Y., Shitanda, I., and Watanabe, K. (2010). “Complex impedance spectra of porous electrode with fractal structure.” Electrochim. Acta, 55(21), 6255–6262.
Itagaki, M., Suzuki, S., Shitanda, I., Watanabe, K., and Nakazawa, H. (2007). “Impedance analysis on electric double layer capacitor with transmission line model.” J. Power Sources, 164(1), 415–424.
Jennings, H. M., and Johnson, S. K. (1986). “Simulation of microstructure development during the hydration of a cement compound.” J. Am. Ceram. Soc., 69(11), 790–795.
Kaufmann, J., Loser, R., and Leemann, A. (2009). “Analysis of cement-bonded materials by multi-cycle mercury intrusion and nitrogen sorption.” J. Colloid Interface Sci., 336(2), 730–737.
Liu, S. H. (1985). “Fractal model for the ac response of a rough interface.” Phys. Rev. Lett., 55(5), 529–532.
Ma, H. (2013). “Multi-scale modeling of the microstructure and transport properties of contemporary concrete.” Ph.D. thesis, Hong Kong Univ. of Science and Technology, Hong Kong.
Ma, H., and Li, Z. (2013). “Realistic pore structure of Portland cement paste: Experimental study and numerical simulation.” Comput. Concr., 11(4), 317–336.
Ma, H., Tian, Y., and Li, Z. (2011). “Interactions between organic and inorganic phases in PA- and PU/PA-modified cement-based materials.” J. Mater. Civ. Eng., 1412–1421.
Mehta, P. K., and Monteiro, P. J. (2006). Concrete: Microstructure, properties, and materials, 3rd Ed., McGraw-Hill, New York.
Neville, A. M. (1996). Properties of concrete, 4th Ed., Wiley, New York.
Pignat, C., Navi, P., and Scrivener, K. (2005). “Simulation of cement paste microstructure hydration, pore space characterization and permeability determination.” Mater. Struct., 38(4), 459–466.
Riding, K. A., Poole, J. L., Folliard, K. J., Juenger, M. C., and Schindler, A. K. (2012). “Modeling hydration of cementitious systems.” ACI Mater. J., 109(2), 225–234.
Sanahuja, J., Dormieux, L., and Chanvillard, G. (2007). “Modelling elasticity of a hydrating cement paste.” Cem. Concr. Res., 37(10), 1427–1439.
Sapoval, B., Chazalviel, J.-N., and Peyrière, J. (1988). “Electrical response of fractal and porous interfaces.” Phys. Rev. A, 38(11), 5867–5887.
Snyder, K. A., Feng, X., Keen, B. D., and Mason, T. O. (2003). “Estimating the electrical conductivity of cement paste pore solutions from , and concentrations.” Cem. Concr. Res., 33(6), 793–798.
Song, H. K., et al. (2004). “Electrochemical porosimetry.” J. Electrochem. Soc., 151(3), E102–E109.
Song, H. K., Hwang, H. Y., Lee, K. H., and Dao, L. H. (2000). “The effect of pore size distribution on the frequency dispersion of porous electrodes.” Electrochim. Acta, 45(14), 2241–2257.
Song, H. K., Jung, Y. H., Lee, K. H., and Dao, L. H. (1999). “Electrochemical impedance spectroscopy of porous electrodes: The effect of pore size distribution.” Electrochim. Acta, 44(20), 3513–3519.
van Breugel, K. (1995a). “Numerical simulation of hydration and microstructural development in hardening cement-based materials. (I) Theory.” Cem. Concr. Res., 25(2), 319–331.
van Breugel, K. (1995b). “Numerical simulation of hydration and microstructural development in hardening cement-based materials. (II) Applications.” Cem. Concr. Res., 25(3), 522–530.
Viallis-Terrissea, H., Nonat, A., and Petit, J.-C. (2001). “Zeta-potential study of calcium silicate hydrates interacting with alkaline cations.” J. Colloid Interface Sci., 244(1), 58–65.
Wei, X. (2004). “Interpretation of hydration process of cement-based materials using resistivity measurement.” Ph.D. thesis, Hong Kong Univ. of Science and Technology, Hong Kong.
Wu, Z., and Lian, H. (1999). High performance concrete, China Railway Publishing House, Beijing.
Xiao, L. Z. (2007). “Interpretation of hydration process of concrete based on electrical resistivity measurement.” Ph.D. thesis, Hong Kong Univ. of Science and Technology, Hong Kong.
Ye, G. (2003). “Experimental study and numerical simulation of the development of the microstructure and permeability of cementitious materials.” Ph.D. thesis, Delft Univ. of Technology, Delft, The Netherlands.
Yu, B. M. (2008). “Analysis of flow in fractal porous media.” Appl. Mech. Rev., 61(5), 050801.
Yu, B. M., and Cheng, P. (2002). “A fractal model for permeability of bi-dispersion porous media.” Int. J. Heat Mass Transfer, 45(14), 2983–2993.
Zhang, J., and Li, Z. (2009). “Application of GEM equation in microstructure characterization of cement-based materials.” J. Mater. Civ. Eng., 648–656.
Zhou, J., Ye, G., and van Breugel, K. (2010). “Characterization of pore structure in cement-based materials using pressurization-depressurization cycling mercury intrusion porosimetry (PDC-MIP).” Cem. Concr. Res., 40(7), 1120–1128.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 3, 2013
Accepted: Nov 13, 2013
Published online: Nov 15, 2013
Discussion open until: Oct 30, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.